CISCO-TELEPRESENCE-MIB Table View

The table contains system peripheral information.
          
An entry in this table has a corresponding entry,
INDEX-ed by the same value of ctpPeripheralIndex,
in the table relevant to the type of interface:
    ctpEtherPeripheralStatusTable for Ethernet,
    ctpHDMIPeripheralStatusTable for HDMI or
    ctpDVIPeripheralStatusTable for DVI.

ctpPeripheralStatusEntry row .1.3.6.1.4.1.9.9.643.1.2.1.1

An entry contains information about one peripheral which is
configured or detected by a Telepresence system.

Indexes

ctpPeripheralIndex

Column	Syntax	OID
ctpPeripheralIndex This object specifies a unique index for a peripheral which is attached to a Telepresence system.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.643.1.2.1.1.1
ctpPeripheralDescription This object specifies a description of the attached peripheral. Peripheral description may be the peripheral type, model and/or version information or a peripheral signal description.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.9.9.643.1.2.1.1.2
ctpPeripheralStatus This object specifies a peripheral status.	CtpPeripheralStatusCode Type Values: 0 noError 1 other 2 cableError 3 powerError 4 mgmtSysConfigError 5 systemError 6 deviceError 7 linkError 8 commError 9 detectionDisabled	.1.3.6.1.4.1.9.9.643.1.2.1.1.3
ctpPeripheralDeviceCategory This object specifies a peripheral category of a device.	CtpPeripheralDeviceCategoryCode Type Values: 0 unknown 1 other 2 uplinkDevice 3 ipPhone 4 camera 5 display 6 secCodec 7 docCamera 8 projector 9 dviDevice 10 presentationCodec 11 auxiliaryControlUnit 12 audioExpansionUnit 13 microphone 14 headset 15 positionMic 16 digitialMediaSystem 17 auxHDMIOutputDevice 18 uiDevice 19 auxHDMIInputDevice 20 bringYourOwnDevice	.1.3.6.1.4.1.9.9.643.1.2.1.1.4
ctpPeripheralDeviceNumber This object specifies a device number for a peripheral. Device number is unique within the same peripheral device category.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.643.1.2.1.1.5

The table contains information about all peripherals
connected to the system via Ethernet port.

ctpEtherPeripheralStatusEntry row .1.3.6.1.4.1.9.9.643.1.2.2.1

An entry contains information about one peripheral
attached to the Telepresence system via Ethernet.

Indexes

ctpPeripheralIndex ctpEtherPeripheralIndex

Column	Syntax	OID
ctpEtherPeripheralIndex This object specifies a unique number for a peripheral Ethernet interface. If no peripheral has more than one Ethernet interface, this object will have value '1'.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.643.1.2.2.1.1
ctpEtherPeripheralIfIndex The object specifies an index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.9.643.1.2.2.1.2
ctpEtherPeripheralAddrType This object specifies the type of address contained in the corresponding instance of ctpEtherPeripheralAddr.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.643.1.2.2.1.3
ctpEtherPeripheralAddr This object specifies the address of the attached peripheral in the format given by the corresponding instance of ctpEtherPeripheralAddrType.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.643.1.2.2.1.4
ctpEtherPeripheralStatus This object specifies attached peripheral status retrieved via Ethernet port.	CtpPeripheralStatusCode Type Values: 0 noError 1 other 2 cableError 3 powerError 4 mgmtSysConfigError 5 systemError 6 deviceError 7 linkError 8 commError 9 detectionDisabled	.1.3.6.1.4.1.9.9.643.1.2.2.1.5

The table contains information about all peripherals
connected to the system via HDMI.

ctpHDMIPeripheralStatusEntry row .1.3.6.1.4.1.9.9.643.1.2.3.1

An entry contains information about one Telepresence
HDMI peripheral.

Indexes

ctpPeripheralIndex ctpHDMIPeripheralIndex

Column	Syntax	OID
ctpHDMIPeripheralIndex This object specifies a unique number for a peripheral HDMI. If no peripheral has more than one HDMI, this object will have value '1'.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.643.1.2.3.1.1
ctpHDMIPeripheralCableStatus This object specifies cable status of an attached peripheral. This object is set to 'loose' if system detects cable is 'unplugged' but power is 'on'.	CtpPeripheralCableCode Type Values: 1 plugged 2 loose 3 unplugged 4 unknown 5 internalError	.1.3.6.1.4.1.9.9.643.1.2.3.1.2
ctpHDMIPeripheralPowerStatus This object specifies power status of an attached peripheral. This object is set to 'unknown' if system detects cable is 'unplugged'.	CtpPeripheralPowerCode Type Values: 1 on 2 standby 3 off 4 unknown 5 internalError	.1.3.6.1.4.1.9.9.643.1.2.3.1.3

The table contains information about all peripherals
connected to the system via DVI.

ctpDVIPeripheralStatusEntry row .1.3.6.1.4.1.9.9.643.1.2.4.1

An entry contains information about one peripheral
attached to the Telepresence system via DVI.

Indexes

ctpPeripheralIndex ctpDVIPeripheralIndex

Column	Syntax	OID
ctpDVIPeripheralIndex This object specifies a unique number for a peripheral DVI. If no peripheral has more than one DVI, this object will have value '1'. Note that some Telepresence systems have no DVI port an…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.643.1.2.4.1.1
ctpDVIPeripheralCableStatus This object specifies attached device cable status reported by DVI.	CtpPeripheralCableCode Type Values: 1 plugged 2 loose 3 unplugged 4 unknown 5 internalError	.1.3.6.1.4.1.9.9.643.1.2.4.1.2

The table contains information about all peripherals
connected to the system via RS-232.

ctpRS232PeripheralStatusEntry row .1.3.6.1.4.1.9.9.643.1.2.5.1

An entry contains information about one peripheral
attached to the Telepresence system via RS-232.

Indexes

ctpPeripheralIndex ctpRS232PeripheralIndex

Column	Syntax	OID
ctpRS232PeripheralIndex This object specifies a unique number for a peripheral RS-232. If no peripheral has more than one RS-232, this object will have value '1'. Note that some Telepresence systems have no RS-23…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.643.1.2.5.1.1
ctpRS232PortIndex The object specifies an index value that uniquely identifies the RS-232 port to which this entry is applicable. Its value is the same as RS-232-MIB's rs232PortIndex for the port. If RS-232-MIB is not supp…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.9.643.1.2.5.1.2
ctpRS232PeripheralConnStatus This object specifies peripheral which is connected via RS232. When the object is 'connected(1)', peripheral connection via RS232 is working properly. When the object is 'unknown(2)', peripheral connecti…	Enumeration Enumerated Values: 1 connected 2 unknown	.1.3.6.1.4.1.9.9.643.1.2.5.1.3

The table contains information about attributes for the
peripherals which are connected to the system. Peripheral
attribute may specify peripheral's component information,
for example, an entry may specify lifetime of a lamp
on a presentation device.

ctpPeripheralAttributeEntry row .1.3.6.1.4.1.9.9.643.1.2.6.1

An entry contains information about one peripheral
attribute related to the peripheral specified by
ctpPeripheralIndex.

Indexes

ctpPeripheralIndex ctpPeripheralAttributeIndex

Column	Syntax	OID
ctpPeripheralAttributeIndex This object specifies a unique number for a peripheral attribute. If no peripheral has more than one attribute, this object will have value '1'.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.643.1.2.6.1.1
ctpPeripheralAttributeDescr This object specifies description of a attribute. The supported attributes are lampOperTime(1) -- indicate the lamp operating time of a peripheral lampState(2) -- indicat…	Enumeration Enumerated Values: 1 lampOperTime 2 lampState 3 powerSwitchState	.1.3.6.1.4.1.9.9.643.1.2.6.1.2
ctpPeripheralAttributeValue This object specifies value of the attribute corresponding to ctpPeripheralAttributeDescr. The possible value of the supported attributes is listed as the following: Attribute Unit SYNTAX ----------------…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.643.1.2.6.1.3

This table contains information about all the peripherals
connected to the system via USB.

ctpUSBPeripheralStatusEntry row .1.3.6.1.4.1.9.9.643.1.2.7.1

An entry drescribes a peripheral connected to the Telepresence
system through USB.

Indexes

ctpPeripheralIndex ctpUSBPeripheralIndex

Column	Syntax	OID
ctpUSBPeripheralIndex This object indicates an arbitrary positive, integer-value that uniquely identifies the USB peripheral.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.643.1.2.7.1.1
ctpUSBPeripheralCableStatus This object indicates the status of the cable attaching the USB peripheral.	CtpPeripheralCableCode Type Values: 1 plugged 2 loose 3 unplugged 4 unknown 5 internalError	.1.3.6.1.4.1.9.9.643.1.2.7.1.2
ctpUSBPeripheralPowerStatus This object indicates the source of power for the attached USB peripheral: 'unknown' - The source of power is unknown. 'self' - The USB peripheral is externally powered. 'bus' - The USB peripheral is po…	Enumeration Enumerated Values: 1 unknown 2 self 3 bus 4 both	.1.3.6.1.4.1.9.9.643.1.2.7.1.3
ctpUSBPeripheralPortType This object indicates the type of device connected to the USB port: 'host' - no device os connected to the port 'device' - a usb device is connected to the port 'hub' - a usb hub is connected to the port	Enumeration Enumerated Values: 1 host 2 device 3 hub	.1.3.6.1.4.1.9.9.643.1.2.7.1.4
ctpUSBPeripheralPortRate This object indicates the current operational rate of the USB peripheral: 'unknown' - The USB port rate is unknown 'low' - The USB port rate is at 1.5 Mbps. 'full' - The USB port rate is at 12 Mbps. 'hi…	Enumeration Enumerated Values: 1 low 2 full 3 high	.1.3.6.1.4.1.9.9.643.1.2.7.1.5

The table contains information about all peripherals
connected to the system via 802dot11.

ctp802dot11PeripheralStatusEntry row .1.3.6.1.4.1.9.9.643.1.2.8.1

An entry describes one Telepresence 802dot11 peripheral.

Indexes

ctpPeripheralIndex ctp802dot11PeripheralIndex

Column	Syntax	OID
ctp802dot11PeripheralIndex This object indicates an arbitrary positive, integer-value that uniquely identifies the IEEE 802.11 peripheral.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.643.1.2.8.1.1
ctp802dot11PeripheralIfIndex This object indicates an index value that uniquely identifies the interface to which this entry is applicable. If this entry doesn't have corresponding ifIndex, then this value will have value '0'.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.9.643.1.2.8.1.2
ctp802dot11PeripheralAddrType This object indicates the type of address indicated by the corresponding instance of ctp802dot11PeripheralAddr.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.643.1.2.8.1.3
ctp802dot11PeripheralAddr This object indicates the address of the attached peripheral in the format indicated by the corresponding instance of ctp802dot11PeripheralAddrType.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.643.1.2.8.1.4
ctp802dot11PeripheralLinkStrength This object indicates the link strength of an IEEE 802.11 link for a peripheral. A return value of 0 indicates the link is not connected. A return value between 1 - 5 indicates the strength of the link, with 1 being the…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.643.1.2.8.1.5
ctp802dot11PeripheralLinkStatus This object indicates the link status of the attached peripheral via IEEE 802.11 link.	CtpPeripheralCableCode Type Values: 1 plugged 2 loose 3 unplugged 4 unknown 5 internalError	.1.3.6.1.4.1.9.9.643.1.2.8.1.6

The table contains information about all peripherals
connected to the system via DP.

ctpDPPeripheralStatusEntry row .1.3.6.1.4.1.9.9.643.1.2.9.1

An entry contains information about one Telepresence
DP peripheral.

Indexes

ctpPeripheralIndex ctpDPPeripheralIndex

Column	Syntax	OID
ctpDPPeripheralIndex This object indicates a unique number for a peripheral DP. If no peripheral has more than one DP, this object will have value '1'.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.643.1.2.9.1.1
ctpDPPeripheralCableStatus This object indicates the cable status of a peripheral which is attached to the system via Display Port interface. This object returns 'loose' if system detects cable is 'unplugged' but power is 'on'.	CtpPeripheralCableCode Type Values: 1 plugged 2 loose 3 unplugged 4 unknown 5 internalError	.1.3.6.1.4.1.9.9.643.1.2.9.1.2
ctpDPPeripheralPowerStatus This object indicates the power status of a peripheral which is attached to the system via Display Port interface. This object returns 'unknown' if system detects cable is 'unplugged'.	CtpPeripheralPowerCode Type Values: 1 on 2 standby 3 off 4 unknown 5 internalError	.1.3.6.1.4.1.9.9.643.1.2.9.1.3

This table contains a history of the detected peripheral
status changes.
          
After a management agent restart, when sysUpTime is reset to
zero, this table records all notifications until such time as 
it becomes full. Thereafter, it remains full by retaining the 
number of most recent notifications specified in 
ctpPeripheralErrorHistTableSize.

ctpPeripheralErrorHistoryEntry row .1.3.6.1.4.1.9.9.643.1.3.3.1

An entry contains information about a Telepresence
peripheral status changes.

Indexes

ctpPeripheralErrorHistoryIndex

Column	Syntax	OID
ctpPeripheralErrorHistoryIndex A unique non-zero integer value that identifies a CtpPeripheralErrorHistoryEntry in the table. The value of this index starts from '1' and monotonically increases for each peripheral error known to the ag…	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.643.1.3.3.1.1
ctpPeripheralErrorIndex The object specifies the value of ctpPeripheralIndex of a peripheral which is in error state. This object is deprecated in favor of ctpPeripheralErrorDeviceCategory and ctpPeripheralErrorDeviceNumber.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.643.1.3.3.1.2
ctpPeripheralErrorStatus This object specifies the peripheral status after its status changed.	CtpPeripheralStatusCode Type Values: 0 noError 1 other 2 cableError 3 powerError 4 mgmtSysConfigError 5 systemError 6 deviceError 7 linkError 8 commError 9 detectionDisabled	.1.3.6.1.4.1.9.9.643.1.3.3.1.3
ctpPeripheralErrorTimeStamp This object specifies the value of the sysUpTime object at the time the notification was generated.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.643.1.3.3.1.4
ctpPeripheralErrorDeviceCategory The object specifies peripheral device category after its status changed.	CtpPeripheralDeviceCategoryCode Type Values: 0 unknown 1 other 2 uplinkDevice 3 ipPhone 4 camera 5 display 6 secCodec 7 docCamera 8 projector 9 dviDevice 10 presentationCodec 11 auxiliaryControlUnit 12 audioExpansionUnit 13 microphone 14 headset 15 positionMic 16 digitialMediaSystem 17 auxHDMIOutputDevice 18 uiDevice 19 auxHDMIInputDevice 20 bringYourOwnDevice	.1.3.6.1.4.1.9.9.643.1.3.3.1.5
ctpPeripheralErrorDeviceNumber The object specifies peripheral device number after its status changed. Device number is unique within the same peripheral device category.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.643.1.3.3.1.6

This table contains a history of detected user
authentication failures.
          
After a management agent restart, when sysUpTime is reset
to zero, this table records all user authentication failure
notifications until such time as it becomes full. Thereafter,
it remains full by retaining the number of most recent
notifications specified in ctpSysUserAuthFailHistTableSize.

ctpSysUserAuthFailHistoryEntry row .1.3.6.1.4.1.9.9.643.1.3.6.1

An entry contains information about a Telepresence
system user authentication failure.

Indexes

ctpSysUserAuthFailHistoryIndex

Column	Syntax	OID
ctpSysUserAuthFailHistoryIndex A unique non-zero integer value that identifies a CtpSysUserAuthFailHistoryEntry in the table. The value of this index starts from '1' and monotonically increases for each system authentication failure ev…	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.643.1.3.6.1.1
ctpSysUserAuthFailSourceAddrType The object specifies the type of address contained in the corresponding instance of ctpSysUserAuthFailSourceAddr.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.643.1.3.6.1.2
ctpSysUserAuthFailSourceAddr The object specifies the source address when the user authentication failure occurred, in the format given by the corresponding instance of ctpSysUserAuthFailSourceAddrType.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.643.1.3.6.1.3
ctpSysUserAuthFailSourcePort The object specifies the source TCP/UDP port number when a user authentication failure occurred.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.643.1.3.6.1.4
ctpSysUserAuthFailUserName The object specifies the user name which was used to gain system access when authentication failure occurred.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.9.9.643.1.3.6.1.5
ctpSysUserAuthFailAccessProtocol This object specifies the access protocol when a user authentication failure occurred.	CtpSystemAccessProtocol Type Values: 1 http 2 snmp 3 ssh	.1.3.6.1.4.1.9.9.643.1.3.6.1.6
ctpSysUserAuthFailTimeStamp This object specifies the value of the sysUpTime object at the time the notification was generated.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.643.1.3.6.1.7