CISCO-TELEPRESENCE-EXCHANGE-SYSTEM-MIB Table View

This table specifies the configuration information
for service providers as they are configured in the 
CTX System.  Service provider entries provide a logical 
grouping of regions, organizations, and resources.

ctxServiceProviderEntry row .1.3.6.1.4.1.9.9.758.1.1.1.1

Each entry describes a service provider entry as
configured in the CTX System.

Indexes

ctxServiceProviderIndex

Column	Syntax	OID
ctxServiceProviderIndex Service provider snmp instance configuration index.	CtxIndex	.1.3.6.1.4.1.9.9.758.1.1.1.1.1
ctxServiceProviderKey This object specifies the service provider ID key.	CtxKeyId Type Constraints: range: 0..32	.1.3.6.1.4.1.9.9.758.1.1.1.1.2
ctxServiceProviderName This object specifies the service provider name as configured in the CTX System.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.9.9.758.1.1.1.1.3
ctxServiceProviderDescr This object specifies the service provider description as configured in the CTX System.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.9.9.758.1.1.1.1.4
ctxServiceProviderHDNumber This object specifies the service provider help desk number. This number is normally in the e.164 format.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.758.1.1.1.1.5

This table specifies the configuration information
for regions as they are configured in the CTX System.
          
A region is defined as a set of 'like' resources
in terms of network latency, jitter, quality of service,
etc. Normally a region is a geographic area such as 
Americas, Europe, or Asia Pacific, but a region can be
a smaller set of like resources such as East and West 
regions.

ctxRegionEntry row .1.3.6.1.4.1.9.9.758.1.1.2.1

Each entry describes a region entry as
configured in the CTX System.

Indexes

ctxRegionIndex

Column	Syntax	OID
ctxRegionIndex Region snmp instance configuration index.	CtxIndex	.1.3.6.1.4.1.9.9.758.1.1.2.1.1
ctxRegionKey This object specifies the region entry ID key as generated by the CTX System when the entry entry was configured.	CtxKeyId Type Constraints: range: 0..32	.1.3.6.1.4.1.9.9.758.1.1.2.1.2
ctxRegionName This object specifies the region name as configured in the CTX System.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.9.9.758.1.1.2.1.3
ctxRegionDescr This object specifies the region description as configured in the CTX System.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.9.9.758.1.1.2.1.4
ctxRegionServiceProviderKeyRef1 This object references the ctxServiceProviderKey object from the ctxServiceProviderEntry table. This key matches the service provider key. This key provides an association reference to the service provider entry that…	CtxKeyId Type Constraints: range: 0..32	.1.3.6.1.4.1.9.9.758.1.1.2.1.5

This table specifies the configuration information
for an organization as they are configured in the 
CTX System.  Organization entries provide a logical 
grouping of customer endpoints and resources.

ctxOrganizationEntry row .1.3.6.1.4.1.9.9.758.1.1.3.1

Each entry represents an organization configuration
entry as configured in the CTX system.

Indexes

ctxOrganizationIndex

Column	Syntax	OID
ctxOrganizationIndex Organization snmp instance configuration index.	CtxIndex	.1.3.6.1.4.1.9.9.758.1.1.3.1.1
ctxOrganizationKey This object specifies the organization ID key as generated by the CTX System when the organization entry was configured.	CtxKeyId Type Constraints: range: 0..32	.1.3.6.1.4.1.9.9.758.1.1.3.1.2
ctxOrganizationName This object specifies the organization name as configured in the CTX System.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.9.9.758.1.1.3.1.3
ctxOrganizationDescr This object specifies the organization description as configured in the CTX System.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.9.9.758.1.1.3.1.4
ctxOrganizationMaxPorts This object specifies the organization maximum ports for scheduled meetings. The value of 0 indicates undefined.	CtxPorts Type Constraints: range: 1..65535	.1.3.6.1.4.1.9.9.758.1.1.3.1.5
ctxOrganizationDirectDial This object specifies the organization direct dial enabled flag as configured in the CTX System. If direct dial calls are allowed, this value will be TRUE. If direct dial calls are not allowed, this value will be FALS…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.758.1.1.3.1.6
ctxOrganizationServiceProviderKeyRef1 This object references the ctxServiceProviderKey object from the ctxServiceProviderEntry table. This key matches the service provider key. This key provides an association reference to the service provider entry that…	CtxKeyId Type Constraints: range: 0..32	.1.3.6.1.4.1.9.9.758.1.1.3.1.7

This table specifies the configuration information
for resources as they are configured in the 
CTX System. 
          
A resource is server or network device that the CTX
System includes in configuration to provide call
signaling, media services, scheduling, or other function. 
          
A resource may have additional configuration items, 
such as ctxSipConfigTable.  Each of the other
ctxResourceObjects tables are indexed by this resource
entry.  If a resource has SIP configurations, there 
will be a entry in the ctxSipConfigEntry indexed by
this ctxResourceIndex.  
          
  |- Service Providers - Logical grouping
     |-- Regions - Logical grouping
     |  |
     |  |--- Resources - General configs for resources 
     |  |      that are common to all resources
     |  |
     |     |--- SIP Configs - SIP configurations such as 
     |     |       SIP IP, port, and protocol
     |     |
     |     |--- Meeting Configs - Meeting configurations
     |     |       such as Min/Max meeting ID's 
     |     |
     |     |--- Capacity Configs - Media port counts, 
     |     |       large meeting support, etc.

ctxResourceEntry row .1.3.6.1.4.1.9.9.758.1.1.4.1.1

Each entry represents a resource configuration
entry as configured in the CTX system.

Indexes

ctxResourceIndex

Column	Syntax	OID
ctxResourceIndex Resource snmp instance configuration index.	CtxIndex	.1.3.6.1.4.1.9.9.758.1.1.4.1.1.1
ctxResourceKey This object specifies the resource ID key as generated by the CTX System when the resource entry was configured. This key is a globally unique across all configuration tables and entries. This key wil…	CtxKeyId Type Constraints: range: 0..32	.1.3.6.1.4.1.9.9.758.1.1.4.1.1.2
ctxResourceName This object specifies the resource name as configured in the CTX System.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.9.9.758.1.1.4.1.1.3
ctxResourceDescr This object specifies the resource configuration as configured in the CTX System.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.9.9.758.1.1.4.1.1.4
ctxResourceMgmtIPType This object specifies the management IP address type for the resource as configured in the CTX System.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.758.1.1.4.1.1.5
ctxResourceMgmtIPAddr This object specifies the management IP for the resource as configured in the CTX System. This IP address is used for provisioning, monitoring, and resource probes. The IP address 0.0.0.0 will be used i…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.758.1.1.4.1.1.6
ctxResourceDeviceType This object specifies the resource device type as configured in the CTX System.	CtxResourceType Type Values: 1 ctms 2 ivr 3 sbc 4 sip 5 ctsmanager 6 mseTps 7 mseMedia2 8 isdn 9 cuvcm 10 cucm 11 vcs 12 tms	.1.3.6.1.4.1.9.9.758.1.1.4.1.1.7
ctxResourceRegionKeyRef1 This object references the ctxRegionKey object from the ctxRegionEntry table. This key matches the region key. This key provides an association reference to the region entry that is associated to this resource entry…	CtxKeyId Type Constraints: range: 0..32	.1.3.6.1.4.1.9.9.758.1.1.4.1.1.8

This table specifies the SIP configuration attributes
for a resource.  Only resources that have SIP attributes
will have an entry in this table.

ctxSipConfigEntry row .1.3.6.1.4.1.9.9.758.1.1.4.2.1

Each entry describes the SIP attributes for a resource
as configured in the CTX System.

As described in ctxResourceTable description, this
table is indexed by the ctxResourceIndex. Only entries
that ha…

Indexes

ctxResourceIndex

Column	Syntax	OID
ctxSipIpType This object specifies the SIP IP address type for the resource as configured in the CTX System.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.758.1.1.4.2.1.1
ctxSipIpAddr This object specifies the SIP signaling IP for the resource as configured in the CTX System. This IP address is used for signaling and for SIP OPTION PING resource probes.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.758.1.1.4.2.1.2
ctxSipPort This object specifies the SIP port for the resource as configured in the CTX System.	CISCO-TCCiscoPort Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.9.758.1.1.4.2.1.3
ctxSipTransportProto This object specifies the SIP transport protocol type as configured in the CTX System.	CtxSIPProtocolType Type Values: 1 tcp 2 udp 3 tls	.1.3.6.1.4.1.9.9.758.1.1.4.2.1.4

This table specifies the media capacity configuration
attributes for a resource. Only resources that have 
media capacity attributes will have an entry in this 
table.

ctxMediaCapacityConfigEntry row .1.3.6.1.4.1.9.9.758.1.1.4.3.1

Each entry describes the media capacity attributes for
a resource as configured in the CTX System.

As described in ctxResourceTable description, this
table is indexed by the ctxResourceIndex. Only entr…

Indexes

ctxResourceIndex

Column	Syntax	OID
ctxMediaCapacityMaxPorts This object specifies the maximum port capacity for the resource as configured in the CTX System.	CtxPorts Type Constraints: range: 1..65535	.1.3.6.1.4.1.9.9.758.1.1.4.3.1.1
ctxMediaCapacityLargeMeeting This object specifies the large meeting reservation allowed option for the resource as configured in the CTX System.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.758.1.1.4.3.1.2

This table specifies the meeting configuration
attributes for a resource. Only resources that have 
meeting attributes will have an entry in this 
table.

ctxMeetingConfigEntry row .1.3.6.1.4.1.9.9.758.1.1.4.4.1

Each entry describes the meeting attributes for
a resource as configured in the CTX System.

As described in ctxResourceTable description, this
table is indexed by the ctxResourceIndex. Only entries
tha…

Indexes

ctxResourceIndex

Column	Syntax	OID
ctxMeetingConfigStaticMinId This object specifies the vendor specific minimum static meeting ID as configured in the CTX System.	OctetString Constraints: range: 1-15	.1.3.6.1.4.1.9.9.758.1.1.4.4.1.1
ctxMeetingConfigStaticMaxId This object specifies the vendor specific maximum static meeting ID as configured in the CTX System.	OctetString Constraints: range: 1-15	.1.3.6.1.4.1.9.9.758.1.1.4.4.1.2
ctxMeetingConfigInterOpMinId This object specifies the vendor specific minimum interOp meeting ID as configured in the CTX System.	OctetString Constraints: range: 1-15	.1.3.6.1.4.1.9.9.758.1.1.4.4.1.3
ctxMeetingConfigInterOpMaxId This object specifies the vendor specific maximum interOp meeting ID as configured in the CTX System.	OctetString Constraints: range: 1-15	.1.3.6.1.4.1.9.9.758.1.1.4.4.1.4

This table specifies the configuration information
for cluster nodes as they are configured in the 
CTX System. 
          
A cluster node is a server within the CTX System, such as
admin server, call engine server, or database server.

ctxClusterNodeEntry row .1.3.6.1.4.1.9.9.758.1.1.5.1

Each entry describes a cluster node entry as configured
in the CTX System.

Indexes

ctxClusterNodeIndex

Column	Syntax	OID
ctxClusterNodeIndex Cluster node snmp instance configuration index.	CtxIndex	.1.3.6.1.4.1.9.9.758.1.1.5.1.1
ctxClusterNodeKey This object specifies the cluster node ID key as generated by the CTX System when the cluster node entry was configured.	CtxKeyId Type Constraints: range: 0..32	.1.3.6.1.4.1.9.9.758.1.1.5.1.2
ctxClusterNodeName This object specifies the cluster node name as configured in the CTX system.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.9.9.758.1.1.5.1.3
ctxClusterNodeHostName This object specifies the cluster node hostname as configured in the CTX System.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.758.1.1.5.1.4
ctxClusterNodeIPType This object specifies the cluster node IP address type as configured in the CTX System.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.758.1.1.5.1.5
ctxClusterNodeIPAddr This object specifies the cluster node IP address as configured in the CTX System.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.758.1.1.5.1.6
ctxClusterNodeClusterName This object specifies the cluster node cluster name as configured in the CTX System.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.9.9.758.1.1.5.1.7
ctxClusterNodeType This object specifies the cluster node type as configured in the CTX System.	CtxClusterNodeTypes Type Values: 1 admin 2 engine 3 db	.1.3.6.1.4.1.9.9.758.1.1.5.1.8
ctxClusterNodeOperState This object specifies the operational state of the cluster node. The operational state is set by the CTX System based on configuration and proactive monitoring of the cluster node. See the textual conven…	CtxResourceOperState Type Values: 1 operational 2 disabled 3 failed 4 maintenance 5 pending 6 standby 7 unreachable	.1.3.6.1.4.1.9.9.758.1.1.5.1.9

This table specifies the run-time resource statistics.

ctxResourceStatsEntry row .1.3.6.1.4.1.9.9.758.1.3.1.1

Each entry describes an individual resource and
statistics for it.

This table is indexed by the ctxResourceIndex. All
resources will have an entry in this table to define
common resource statistics, such…

Indexes

ctxResourceIndex

Column	Syntax	OID
ctxResourceOperState This object specifies the operational state of the resource. The operational state is set by the CTX System based on configuration and proactive monitoring of the resource. See the textua…	CtxResourceOperState Type Values: 1 operational 2 disabled 3 failed 4 maintenance 5 pending 6 standby 7 unreachable	.1.3.6.1.4.1.9.9.758.1.3.1.1.1
ctxResourceUnavailTrans This object specifies a counter that increments when the resource transitions to unreachable or failed state from another state. The management entity can use this to track the operational stability of the resource.	occurrencesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.758.1.3.1.1.2
ctxResourceUnavailDuration Defines the total time in seconds that the resource was in either the failed or unreachable states. This counter keeps track of time in seconds on how much the resource stays in the failed and unreachable states. …	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.758.1.3.1.1.3
ctxResourceCallSetupFailures This object specifies a counter that increments every time a call fails to be setup correctly to this resource. Miss-dialed numbers are excluded and not considered a failure.	occurrencesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.758.1.3.1.1.4

This table specifies the run-time scheduling port
allocation statistics.

ctxAllocStatsEntry row .1.3.6.1.4.1.9.9.758.1.3.2.1

Each entry describes an individual resource and
statistics for media port allocations.

This table is indexed by the ctxResourceIndex. Only
resources that require port allocations will have
an entry in th…

Indexes

ctxResourceIndex

Column	Syntax	OID
ctxAllocActivePorts This object identifies the active in-use ports for the resource.	CtxPorts Type Constraints: range: 1..65535	.1.3.6.1.4.1.9.9.758.1.3.2.1.1
ctxAllocAvailPorts This object identifies the available ports for the resource.	CtxPorts Type Constraints: range: 1..65535	.1.3.6.1.4.1.9.9.758.1.3.2.1.2
ctxAllocFailures This object increments when there are not enough port resources available to process the requested allocation or if there is an error allocating the ports.	failuresSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.758.1.3.2.1.3
ctxAllocOutOfPorts This object increments when there are not enough port resources available to process the requested allocation.	occurrencesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.758.1.3.2.1.4

This table specifies the run-time statistics for regions
for scheduling port allocations and call setup failures.
This table is similar to the ctxAllocStatsTable table, 
except this table provides statistics per region for 
all resources.

ctxRegionStatsEntry row .1.3.6.1.4.1.9.9.758.1.3.3.1

Each entry describes statistics for a region.

This table is indexed by the ctxRegionIndex.

Indexes

ctxRegionIndex

Column	Syntax	OID
ctxRegionCallSetupFailures This object specifies a counter that increments every time a call fails to be setup correctly in this region. Mis-dialed numbers are excluded and not considered a failure.	failuresSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.758.1.3.3.1.1
ctxAllocPoolActivePorts This object identifies the active in-use ports for the region.	CtxPorts Type Constraints: range: 1..65535	.1.3.6.1.4.1.9.9.758.1.3.3.1.2
ctxAllocPoolAvailPorts This object identifies the available ports for resources within the region.	CtxPorts Type Constraints: range: 1..65535	.1.3.6.1.4.1.9.9.758.1.3.3.1.3
ctxAllocPoolAllocFailures This object increments when there are not enough port resources available to process the requested allocation or if there is an error allocating the port for the given region.	failuresSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.758.1.3.3.1.4
ctxAllocPoolAllocOutOfPorts This object increments when there are not enough port resources available to process the requested allocation for the given region resource pool.	occurrencesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.758.1.3.3.1.5

This table specifies the run-time peak statistics for resource
port allocations. This table contains peak port allocations per
resource for ctxHistMaxIntervals. The management entity can 
use this table to monitor the peak port allocations per
interval.    
          
Setting ctxPeakHistMaxIntervals to 0 will disable this table and
clear all entries in table.

ctxPeakHistAllocEntry row .1.3.6.1.4.1.9.9.758.1.3.4.3.1

Each entry describes a single peak time interval per resource.

This table is indexed by the ctxResourceIndex and
ctxPeakHistAllocIntIndex. Only resources that have port
allocations will have an entry in thi…

Indexes

ctxResourceIndex ctxPeakHistAllocIntIndex

Column	Syntax	OID
ctxPeakHistAllocIntIndex A monotonically increasing integer which is incremented for every interval. Based on the allowed interval length the object will not wrap for life of Device. The intent of this object is to allow network management appl…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.9.758.1.3.4.3.1.1
ctxPeakHistAllocTS This object specifies the start timestamp of the interval. The interval end time is this time plus the ctxPeakHistIntTime.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.758.1.3.4.3.1.2
ctxPeakHistAllocPorts This object specifies the peak ports for the given interval. This is the maximum port count during the interval time period.	portsCtxPorts Type Constraints: range: 1..65535	.1.3.6.1.4.1.9.9.758.1.3.4.3.1.3

This table specifies the run-time peak port allocation
statistics for all resources within a region. This table 
contains peak port allocations per region for 
ctxHistMaxIntervals. The management entity can 
use this table to monitor the peak port allocations per
interval.    
          
Setting ctxPeakHistMaxIntervals to 0 will disable this table and
clear all entries in table.

ctxPeakHistAllocPoolEntry row .1.3.6.1.4.1.9.9.758.1.3.4.4.1

Each entry describes a single peak time interval per region.

This table is indexed by the ctxRegionIndex and
ctxPeakHistAllocPoolIntIndex.

Indexes

ctxRegionIndex ctxPeakHistAllocPoolIntIndex

Column	Syntax	OID
ctxPeakHistAllocPoolIntIndex A monotonically increasing integer which is incremented for every interval. Based on the allowed interval length the object will not wrap for life of Device. The intent of this object is to allow network management appl…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.9.758.1.3.4.4.1.1
ctxPeakHistAllocPoolTS This object specifies the start timestamp of the interval. The interval end time is this time plus the ctxPeakHistIntTime.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.758.1.3.4.4.1.2
ctxPeakHistAllocPoolPorts This object specifies the peak ports for the given interval. This is the maximum port count during the interval time period.	portsCtxPorts Type Constraints: range: 1..65535	.1.3.6.1.4.1.9.9.758.1.3.4.4.1.3

This table contains a history of alarms and events generated
by the CTX system.
          
This table is a real-time history table of alarms and events
for the CTX System. When the table reaches its capacity 
specified in ctxErrorHistoryTableSize, the agent will purge
the oldest entry. 
          
The management entity can receive real-time events when an
object is inserted into this table by configuring 
ctxErrorHistoryEventNotifyEnable to TRUE and receiving
ctxErrorHistoryEvent notifications

ctxErrorHistoryEntry row .1.3.6.1.4.1.9.9.758.1.4.4.1

An entry is an event that was generated by the CTX System.
Events can be traps that were sent and other log messages.

Indexes

ctxErrorIndex

Column	Syntax	OID
ctxErrorIndex Error history snmp instance index.	CtxIndex	.1.3.6.1.4.1.9.9.758.1.4.4.1.1
ctxErrorKey This object specifies the error history key id. A empty string maybe used if the key is not present.	CtxKeyId Type Constraints: range: 0..32	.1.3.6.1.4.1.9.9.758.1.4.4.1.2
ctxErrorTimeStamp This object indicates the timestamp when the message or the notification is generated by the CTX system. The timestamp is UTC.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.758.1.4.4.1.3
ctxErrorSeverity This object specifies the severity for the given message.	CISCO-SYSLOG-MIBSyslogSeverity Type Values: 1 emergency 2 alert 3 critical 4 error 5 warning 6 notice 7 info 8 debug	.1.3.6.1.4.1.9.9.758.1.4.4.1.4
ctxErrorAppName This object specifies the application name for the message. AppNames are documented in the CTX System user guide.	OctetString Constraints: range: 0-48	.1.3.6.1.4.1.9.9.758.1.4.4.1.5
ctxErrorAlarmId This object specifies the alarm ID for the event as generated by the CTX System. Alarm ID's are documented in the CTX System user guide.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.9.9.758.1.4.4.1.6
ctxErrorAttrValStr This object specifies an attribute value pair in the format of attr=value [attr=value ...]. This string is limited to 255 characters. If the attribute value string is larger than 255 characters, the string will be tru…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.758.1.4.4.1.7
ctxErrorMessage This object specifies the message text for the event. This string is limited to 255 characters. If the message string is larger than 255 characters, the string will be truncated to 254 characters and an '*' will be …	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.758.1.4.4.1.8