CISCO-TAP2-MIB Table View

This table lists the Mediation Devices with which the
intercepting device communicates. These may be on the same or
different Mediation Devices.
          
          
This table is written by the Mediation Device, and is always
volatile. This is because intercepts may disappear during a
restart of the intercepting equipment.
          
Entries are added to this table via cTap2MediationStatus in 
accordance with the RowStatus convention.

cTap2MediationEntry row .1.3.6.1.4.1.9.9.399.1.1.2.1

The entry describes a single session maintained with an
application on a Mediation Device.

Indexes

cTap2MediationContentId

Column	Syntax	OID
cTap2MediationContentId cTap2MediationContentId is a session identifier, from the intercept application's perspective, and a content identifier from the Mediation Device's perspective. The Mediation Device is responsible for making sure these …	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.9.399.1.1.2.1.1
cTap2MediationDestAddressType The type of cTap2MediationDestAddress.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.399.1.1.2.1.2
cTap2MediationDestAddress The IP Address of the Mediation Device's network interface to which to direct intercepted traffic.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.399.1.1.2.1.3
cTap2MediationDestPort The port number on the Mediation Device's network interface to which to direct intercepted traffic.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.9.399.1.1.2.1.4
cTap2MediationSrcInterface The interface on the intercepting device from which to transmit intercepted data. If zero, any interface may be used according to normal IP practice.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.9.399.1.1.2.1.5
cTap2MediationRtcpPort The port number on the intercepting device to which the Mediation Devices directs RTCP Receiver Reports and Nacks. This object is only relevant when the value of cTap2MediationTransport is 'rtpNack'. …	INET-ADDRESS-MIBInetPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.9.399.1.1.2.1.6
cTap2MediationDscp The Differentiated Services Code Point the intercepting device applies to the IP packets encapsulating the intercepted traffic.	Ctap2Dscpr/w Type Constraints: range: 0..63	.1.3.6.1.4.1.9.9.399.1.1.2.1.7
cTap2MediationDataType If RTP with Ack/Nack resilience is selected as a transport, the mediation process requires an RTP payload type for data transmissions, and a second RTP payload type for retransmissions. This is the RTP payload type for…	Integer32r/w Constraints: range: 0-127	.1.3.6.1.4.1.9.9.399.1.1.2.1.8
cTap2MediationRetransmitType If RTP with Ack/Nack resilience is selected as a transport, the mediation process requires an RTP payload type for data transmissions, and a second RTP payload type for retransmissions. This is the RTP payload type for…	Integer32r/w Constraints: range: 0-127	.1.3.6.1.4.1.9.9.399.1.1.2.1.9
cTap2MediationTimeout The time at which this row and all related Stream Table rows should be automatically removed, and the intercept function cease. Since the initiating network manager may be the only device able to manage a specific inter…	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.9.9.399.1.1.2.1.10
cTap2MediationTransport The protocol used in transferring intercepted data to the Mediation Device. The following protocols may be supported: udp: PacketCable udp format rtpNack: RTP with Nack resilience tc…	Enumerationr/w Enumerated Values: 1 udp 2 rtpNack 3 tcp 4 sctp 5 rtp	.1.3.6.1.4.1.9.9.399.1.1.2.1.11
cTap2MediationNotificationEnable This variable controls the generation of any notifications or informs by the MIB agent for this table entry.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.399.1.1.2.1.12
cTap2MediationStatus The status of this conceptual row. This object is used to manage creation, modification and deletion of rows in this table. cTap2MediationTimeout may be modified at any time (even while the…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.399.1.1.2.1.13

The Intercept Stream Table lists the traffic streams to be
intercepted. The same data stream may be required by multiple 
taps, and one might assume that often the intercepted stream 
is a small subset of the traffic that could be intercepted.
          
          
The Table consists of generic fields that are independent
of the type of intercept. It contains type of the specific 
filter which is defined in an extension MIB and counters to 
account for packets intercepted or dropped by the attached
filter specification.
          
Note that the Mediation Device must make sure there is 
only one type of specific filter created with the same 
indices as that of a row in this table, otherwise the 
later creations will fail. For example, if there is a 
row in this table with index 1.2, there can be a 
corresponding row with the same index either in 
citapStreamTable, c8tapStreamTable or cuctTapStreamTable,
but not all. 
          
          
The first index indicates which Mediation Device the
intercepted traffic will be diverted to. The second index
permits multiple classifiers to be used together. 
          
Entries are added to this table via cTap2StreamStatus in
accordance with the RowStatus convention.

cTap2StreamEntry row .1.3.6.1.4.1.9.9.399.1.2.1.1

A stream entry indicates a single data stream to be
intercepted to a Mediation Device. Many selected data
streams may go to the same application interface, and many
application interfaces are supported.

Indexes

cTap2MediationContentId cTap2StreamIndex

Column	Syntax	OID
cTap2StreamIndex The index of the stream itself.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.9.399.1.2.1.1.1
cTap2StreamType Identifies the type of intercept filter associated to this generic stream. The following types of streams are supported: ip: The specific filter is an IP filter with same indic…	Enumerationr/w Enumerated Values: 1 ip 2 mac 3 userConnection 4 msPdsn 5 mobility	.1.3.6.1.4.1.9.9.399.1.2.1.1.2
cTap2StreamInterceptEnable If 'true', the tap should intercept matching traffic. The value for this object should be set to 'true' only after an additional filter specification has been attached to this stream.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.399.1.2.1.1.3
cTap2StreamInterceptedPackets The number of packets matching this data stream specification that have been intercepted.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.399.1.2.1.1.4
cTap2StreamInterceptDrops The number of packets matching this data stream specification that, having been intercepted, were dropped in the lawful intercept process.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.399.1.2.1.1.5
cTap2StreamStatus The status of this conceptual row. This object manages creation, modification, and deletion of rows in this table. cTap2StreamInterceptEnable may be modified any time even the value of this entry rowStatus object is 'ac…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.399.1.2.1.1.6
cTap2StreamInterceptedHCPackets The number of packets matching this data stream specification that have been intercepted. This object is a 64-bit version of cTap2StreamInterceptedPackets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.399.1.2.1.1.7
cTap2StreamInterceptHCDrops The number of packets matching this data stream specification that, having been intercepted, were dropped in the lawful intercept process. This object is a 64-bit version of cTap2StreamInterceptDrops.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.399.1.2.1.1.8

A table that contains Lawful Intercept debug messages
generated by the implementing device. This table is used 
by ciscoTap2MediationDebug and ciscoTap2StreamDebug 
notifications.
          
An entry in this table contains a debug message which is
regarding either a Mediation Device or a intercept stream 
created by a Mediation Device. The Mediation device is 
identified by cTap2DebugMediationId whose value is
that of cTap2MediationContentId of cTapMediationEntry.
The stream is identified by cTap2DebugMediationId and
cTap2DebugStreamId whose values are that of 
cTap2MediationContentId and cTap2StreamIndex of 
the corresponding cTap2StreamEntry.
          
Note that cTap2DebugStreamId may be zero for an entry,
in which case the debug message is regarding a Medation
Device.
          
Entries are added to this table via cTap2DebugStatus in
accordance with the RowStatus convention.

cTap2DebugEntry row .1.3.6.1.4.1.9.9.399.1.3.3.1

A list of the debug messages.

Indexes

cTap2DebugIndex

Column	Syntax	OID
cTap2DebugIndex Index to the debug table.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.9.399.1.3.3.1.1
cTap2DebugMediationId The value of this object is that of cTap2MediationContentId identifying an entry in cTap2MediationTable. Note this object may contain a value for which an entry in cTap2MediationTable does not exist. This happens when c…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.399.1.3.3.1.2
cTap2DebugStreamId The value of this object is that of cTap2StreamIndex of an entry in cTap2StreamTable. This object along with cTap2DebugMediationId identifies an entry in cTap2StreamTable. The value of this object may be zero, in which …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.399.1.3.3.1.3
cTap2DebugMessage A text string contains the debug message.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.399.1.3.3.1.4
cTap2DebugStatus The status of this conceptual row. A row in this table is created by the implementing device. A management station cannot modify any of the objects in this row, except deleting the row by setting this object to 'destroy…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.399.1.3.3.1.5

The User Table lists information of all the users configured
in the system who are given permission by different Mediation
Devices to access Lawful Intercept CLIs.
          
This table will have dependancy on cTap2MediationTable. When
entry in cTap2MediationTable is deleted or moved to
'notInService', entries corresponding cTap2MediationContentId
in this table will be deleted.

cTap2DebugUserEntry row .1.3.6.1.4.1.9.9.399.1.3.4.1

A conceptual row in the cTap2DebugUserTable. Each row
represents name of user on the router to whom Mediation Device
with CCCid represented by cTap2MediationContentId has given
access to Lawful Intercept commands and cT…

Indexes

cTap2MediationContentId cTap2DebugUserName

Column	Syntax	OID
cTap2DebugUserName A human readable string representing the name of debug user who will have access to Lawful Intercept commands.	OctetString Constraints: range: 1-255	.1.3.6.1.4.1.9.9.399.1.3.4.1.1
cTap2DebugUserTimeout This object specifies the time at which the row will be removed from the table by the system. The value of this object is only effective when the value of corresponding instance of cTap2DebugUserStatus is 'active'.	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.9.9.399.1.3.4.1.2
cTap2DebugUserStorageType This object specifies the storage type of this conceptual row. If it is set to 'nonVolatile', this entry can be saved into non-volatile memory.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.399.1.3.4.1.3
cTap2DebugUserStatus The status of this conceptual row. This object manages creation, modification, and deletion of rows in this table. cTap2DebugUserTimeout may be modified any time even when the value of this entry rowStatus object is 'ac…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.399.1.3.4.1.4