CISCO-SWITCH-USAGE-MIB
This MIB defines objects related to statistics
for the usage of switch fabric. The switch fabric
is used by the incoming packets from the line/network
to a interface. Such packets are called ingress packets.
Counters are maintained for number of ingress packets/
octets switched by the switch fabric for each
interface.
NOTE: These counters are not counting the total number
of incoming packets and octets for a particular
interface. Instead only the counts of packets and
octets that actually use the switch-fabric are being
accounted for by this MIB. Therefore, the counters in
this MIB are distinctly different from packet and octet
counters found in the IF-MIB.
- Source file
CISCO-SWITCH-USAGE-MIB- Last revised
- Identity
ciscoSwitchUsageMIB- Base OID
1.3.6.1.4.1.9.9.201
Imported Objects
| CISCO-SMI | ciscoMgmt |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Counter64 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-SWITCH-USAGE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-SWITCH-USAGE-MIB::ciscoSwitchUsageMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-SWITCH-USAGE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-SWITCH-USAGE-MIB::ciscoSwitchUsageMIB'
Objects (14)
Showing 14 of 14 objects
Object legend
Table
Row
Column
Scalar
Node
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.9.9.201 |
||
.1.3.6.1.4.1.9.9.201.1 |
||
.1.3.6.1.4.1.9.9.201.1.1 |
||
.1.3.6.1.4.1.9.9.201.1.1.1 |
||
.1.3.6.1.4.1.9.9.201.1.1.1.1 |
||
.1.3.6.1.4.1.9.9.201.1.1.1.1.1 |
||
.1.3.6.1.4.1.9.9.201.1.1.1.1.2 |
||
.1.3.6.1.4.1.9.9.201.1.1.1.1.3 |
||
.1.3.6.1.4.1.9.9.201.1.1.1.1.4 |
||
.1.3.6.1.4.1.9.9.201.2 |
||
.1.3.6.1.4.1.9.9.201.2.0 |
||
.1.3.6.1.4.1.9.9.201.3 |
||
.1.3.6.1.4.1.9.9.201.3.1 |
||
.1.3.6.1.4.1.9.9.201.3.2 |
Dependencies (7) 4 direct · 3 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CISCO-SMIcisco
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- CISCO-SWITCH-USAGE-MIBciscoselected
Conformance Groups (1)
|
cswitchUsageByIngrsIntfPkts cswitchUsageByIngrsIntfHCPkts cswitchUsageByIngrsIntfOctets cswitchUsageByIngrsIntfHCOctets
The Object Group for switch usage statistics
|
.1.3.6.1.4.1.9.9.201.3.2.1
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.9.9.201.3.1.1The compliance statement for the switch usage
statistics group.
statistics group.
Required groups
| mandatory | ciscoSwitchUsageMIBGroup |