Standard view Table view

CISCO-SSM-PROV-MIB

        This MIB is used to provision features
on a Data Path Processor (DPP) of a Storage Service
Module (SSM). A DPP is assigned to a contiguous 
set of ports.  Each DPP can run one or more 
features independent of other DPPs on the module.
Since the concept of a DPP is transparent to the 
network manager, ranges of ports are used to
configure different features. A start and an end 
port are specified to identify a DPP and 
provision a feature.

Source file: CISCO-SSM-PROV-MIB
Last revised: 15 Feb 2005, 00:00 UTC
Identity: ciscoSsmProvMIB
Base OID: 1.3.6.1.4.1.9.9.448

Imported Objects

CISCO-SMI	ciscoMgmt
ENTITY-MIB	entPhysicalIndex
IF-MIB	InterfaceIndex
SNMP-FRAMEWORK-MIB	SnmpAdminString
SNMPv2-CONF	MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI	MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC	RowStatus TruthValue

Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity

/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-SSM-PROV-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-SSM-PROV-MIB::ciscoSsmProvMIB'

Walk the MIB subtree

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-SSM-PROV-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-SSM-PROV-MIB::ciscoSsmProvMIB'

How SNMP, Net-SNMP, MIB paths, and variants work

Objects (23)

ciscoSsmProvMIB		`.1.3.6.1.4.1.9.9.448`
ciscoSsmProvMIBObjects		`.1.3.6.1.4.1.9.9.448.1`
ssmProvConfiguration		`.1.3.6.1.4.1.9.9.448.1.1`
ssmProvFeatureTable		`.1.3.6.1.4.1.9.9.448.1.1.1`
ssmProvFeatureEntry	ENTITY-MIBentPhysicalIndexssmProvFeatureName	`.1.3.6.1.4.1.9.9.448.1.1.1.1`
ssmProvFeatureName	OctetString	`.1.3.6.1.4.1.9.9.448.1.1.1.1.1`
ssmProvFeatureNeedsImage	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.448.1.1.1.1.2`
ssmProvFeatureIfTable		`.1.3.6.1.4.1.9.9.448.1.1.2`
ssmProvFeatureIfEntry	ssmProvFeatureIfStartPortssmProvFeatureIfEndPortssmProvFeatureIfFeatureName	`.1.3.6.1.4.1.9.9.448.1.1.2.1`
ssmProvFeatureIfStartPort	IF-MIBInterfaceIndex	`.1.3.6.1.4.1.9.9.448.1.1.2.1.1`
ssmProvFeatureIfEndPort	IF-MIBInterfaceIndex	`.1.3.6.1.4.1.9.9.448.1.1.2.1.2`
ssmProvFeatureIfFeatureName	OctetString	`.1.3.6.1.4.1.9.9.448.1.1.2.1.3`
ssmProvFeatureIfForceRemove r/w	Enumeration	`.1.3.6.1.4.1.9.9.448.1.1.2.1.4`
ssmProvFeatureIfPartnerImageURI r/w	OctetString	`.1.3.6.1.4.1.9.9.448.1.1.2.1.5`
ssmProvFeatureIfRowStatus r/w	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.9.9.448.1.1.2.1.6`
ssmProvDppTable		`.1.3.6.1.4.1.9.9.448.1.1.3`
ssmProvDppEntry	ssmProvDppStartPort	`.1.3.6.1.4.1.9.9.448.1.1.3.1`
ssmProvDppStartPort	IF-MIBInterfaceIndex	`.1.3.6.1.4.1.9.9.448.1.1.3.1.1`
ssmProvDppEndPort	IF-MIBInterfaceIndex	`.1.3.6.1.4.1.9.9.448.1.1.3.1.2`
ssmProvDppName	OctetString	`.1.3.6.1.4.1.9.9.448.1.1.3.1.3`
ciscoSsmProvMIBConform		`.1.3.6.1.4.1.9.9.448.2`
ssmProvMIBCompliances		`.1.3.6.1.4.1.9.9.448.2.1`
ssmProvMIBGroups		`.1.3.6.1.4.1.9.9.448.2.2`

Dependencies (11) 7 direct · 4 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree

CISCO-SSM-PROV-MIBciscoselected
- CISCO-SMIcisco1 symbol
  - SNMPv2-SMIrfcdefault fallback3 symbols
- ENTITY-MIBrfcdefault fallback1 symbol
  - IANA-ENTITY-MIBrfc1 symbol
    - SNMPv2-SMIrfcshared2 symbols
    - SNMPv2-TCrfc1 symbol
      - SNMPv2-SMIrfcshared1 symbol
  - SNMP-FRAMEWORK-MIBrfc1 symbol
    - SNMPv2-CONFrfc2 symbols
      - SNMPv2-SMIrfcshared3 symbols
    - SNMPv2-SMIrfcshared4 symbols
    - SNMPv2-TCrfcshared1 symbol
  - SNMPv2-CONFrfcshared3 symbols
  - SNMPv2-SMIrfcshared5 symbols
  - SNMPv2-TCrfcshared8 symbols
  - UUID-TC-MIBrfc1 symbol
    - SNMPv2-SMIrfcshared2 symbols
    - SNMPv2-TCrfcshared1 symbol
- IF-MIBrfcdefault fallback1 symbol
  - IANAifType-MIBrfc1 symbol
    - SNMPv2-SMIrfcshared2 symbols
    - SNMPv2-TCrfcshared1 symbol
  - SNMPv2-CONFrfcshared3 symbols
  - SNMPv2-MIBrfc1 symbol
    - SNMPv2-CONFrfcshared3 symbols
    - SNMPv2-SMIrfcshared7 symbols
    - SNMPv2-TCrfcshared3 symbols
  - SNMPv2-SMIrfcshared9 symbols
  - SNMPv2-TCrfcshared8 symbols
- SNMP-FRAMEWORK-MIBrfcdefault fallbackshared1 symbol
- SNMPv2-CONFrfcdefault fallbackshared2 symbols
- SNMPv2-SMIrfcdefault fallbackshared2 symbols
- SNMPv2-TCrfcdefault fallbackshared2 symbols

Dependency-first compile order

Conformance Groups (3)

ssmProvFeatureGroup	ssmProvFeatureNeedsImage A collection of objects related to SSM features.	`.1.3.6.1.4.1.9.9.448.2.2.1`
ssmProvFeatureIfGroup	ssmProvFeatureIfForceRemove ssmProvFeatureIfPartnerImageURI ssmProvFeatureIfRowStatus A collection of objects related to SSM Feature to Interface mapping .	`.1.3.6.1.4.1.9.9.448.2.2.2`
ssmProvDppGroup	ssmProvDppEndPort ssmProvDppName A collection of objects related to DPP to interface mapping.	`.1.3.6.1.4.1.9.9.448.2.2.3`

Compliance Statements (1)

OID .1.3.6.1.4.1.9.9.448.2.1.1

The compliance statement for entities which
implement this MIB.

Required groups

mandatory	ssmProvFeatureGroup
mandatory	ssmProvFeatureIfGroup
mandatory	ssmProvDppGroup

Object refinements

Object	Access	Syntax	Description
ssmProvFeatureIfRowStatus		SNMPv2-TCRowStatus active(1), createAndGo(4), destroy(6)	Only three values 'createAndGo', 'destroy' and 'active' out of the six enumerated values need to be supported.