CISCO-SNMP-VACM-EXT-MIB
The management information definitions to extend
the View-based Access Control Model (RFC3415) for
SNMP.
This MIB extends the 'SNMP-VIEW-BASED-ACM-MIB' to
allow each combination of a 'securityModel' and a
'securityName' to be mapped into additional
groupNames. The groups identified by these mappings
are in addition to those identified by
'vacmGroupName' of the 'vacmSecurityToGroupTable'.
- Source file
CISCO-SNMP-VACM-EXT-MIB- Last revised
- Identity
ciscoSnmpVacmExtMIB- Base OID
1.3.6.1.4.1.9.9.409
Imported Objects
| CISCO-SMI | ciscoMgmt |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMP-VIEW-BASED-ACM-MIB | vacmSecurityModel vacmSecurityName |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) |
| SNMPv2-TC | RowStatus StorageType |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-SNMP-VACM-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-SNMP-VACM-EXT-MIB::ciscoSnmpVacmExtMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-SNMP-VACM-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-SNMP-VACM-EXT-MIB::ciscoSnmpVacmExtMIB'
Objects (10)
Showing 10 of 10 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.9.9.409 |
||
.1.3.6.1.4.1.9.9.409.1 |
||
.1.3.6.1.4.1.9.9.409.1.1 |
||
.1.3.6.1.4.1.9.9.409.1.1.1 |
||
|
OctetString
|
.1.3.6.1.4.1.9.9.409.1.1.1.1 |
|
.1.3.6.1.4.1.9.9.409.1.1.1.2 |
||
.1.3.6.1.4.1.9.9.409.1.1.1.3 |
||
.1.3.6.1.4.1.9.9.409.2 |
||
.1.3.6.1.4.1.9.9.409.2.1 |
||
.1.3.6.1.4.1.9.9.409.2.2 |
Dependencies (6) 6 direct Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CISCO-SMIcisco
- SNMPv2-CONFrfc
- SNMPv2-TCrfc
- SNMP-FRAMEWORK-MIBrfc
- SNMP-VIEW-BASED-ACM-MIBrfc
- CISCO-SNMP-VACM-EXT-MIBciscoselected
Conformance Groups (1)
|
A collection of objects providing for remote
configuration of an SNMP engine which extends the SNMP View-based Access Control Model. |
.1.3.6.1.4.1.9.9.409.2.2.1
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.9.9.409.2.1.1The compliance statement for SNMP engines which
implement the CISCO-SNMP-VACM-EXT-MIB.
implement the CISCO-SNMP-VACM-EXT-MIB.
Required groups
| mandatory | ciscoSnmpVacmExtGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| cvacmSecurityGrpStatus |
active(1), createAndGo(4), destroy(6)
|
Only 'active', 'createAndGo' and 'destroy' are needed to be supported. |