CISCO-SERVICE-CONTROL-ATTACK-MIB Table View

This table lists the aggregated statistics for each detected
attack in a network controlled by a service control entity.

cscaTypeEntry row .1.3.6.1.4.1.9.9.693.1.2.1

This entry contains information for an attack detected by the
service control entity.

The service control entity can report a number of attack types,
the cscaTypeTable is created during the initialization o…

Indexes

ENTITY-MIBentPhysicalIndex cscaTypeIndex

Column	Syntax	OID
cscaTypeIndex This object uniquely identifies the attack type.	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.9.9.693.1.2.1.1
cscaTypeCurrentNumAttacks This object indicates the current number of ongoing attacks of this type, that the service control entity has detected in the network.	attacksSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.693.1.2.1.2
cscaTypeTotalNumAttacks This object indicates the total number of attacks of this type since the last discontinuity.	attacksSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.693.1.2.1.3
cscaTypeTotalNumFlows This object indicates the total number of IP flows on which this type of attack has been detected, since the last discontinuity.	IP flowsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.693.1.2.1.4
cscaTypeTotalNumSeconds This object indicates the accumulated duration in seconds belonging to this attack type, since the last discontinuity.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.693.1.2.1.5
cscaTypeOriginatedByNetworkSide This object indicates whether this attack type is originated from the Network side or from the Subscriber side.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.693.1.2.1.6
cscaTypeProtocol This enumerated object indicates the protocol type for this type of attack (TCP/UDP/ICMP/etc). The values for this object are: (1) TCP (2) UDP (3) ICMP (4) Other	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.9.693.1.2.1.7
cscaTypeIsPortSpecific This object indicates whether the attack type is port-specific or not.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.693.1.2.1.8
cscaTypeIPsDetected This object indicates which IPs are detected in this type of attack. The enumerated values are: (1) Originating Side IP is detected. (2) Attacked Side IP is detected. (3) Both side IPs are detected.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.9.693.1.2.1.9

This table lists information for attack mitigation, also
referred to as attack filtering, done by a service control
entity in the monitored network.

cscaInfoEntry row .1.3.6.1.4.1.9.9.693.1.3.1

This entry contains information about attack mitigation done by
a physical service control entity, for attacks which it has
detected.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cscaInfoUpStreamAttackFilteringTime This object indicates the cumulative time during which attacks in the up-stream direction were filtered.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.693.1.3.1.1
cscaInfoUpStreamLastAttackFilteringTime This object indicates the time since the previous attack in the upstream direction has ended. Attack end is reached when the service control entity attack detector identifies that the attack characteristics (like high …	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.9.9.693.1.3.1.2
cscaInfoDownStreamAttackFilteringTime This object indicates the cumulative time during which attacks in the down-stream direction were filtered.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.693.1.3.1.3
cscaInfoDownStreamLastAttackFilteringTime This object indicates the time since the previous attack in the downstream direction has ended. Attack end is reached when the service control entity attack detector identifies that the attack characteristics (like hig…	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.9.9.693.1.3.1.4