CISCO-SCAS-BB-MIB

        Main SNMP MIB for Cisco SCAS BB application
which runs over Service Control Engine devices.
    
Source file
CISCO-SCAS-BB-MIB
Last revised
Identity
pcubeEngageMIB
Base OID
1.3.6.1.4.1.5655.2.4
Imported Objects
PCUBE-SE-MIB linkIndex linkModuleIndex pmoduleIndex spvIndex
PCUBE-SMI pcubeModules pcubeWorkgroup
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page)
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-SCAS-BB-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-SCAS-BB-MIB::pcubeEngageMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-SCAS-BB-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-SCAS-BB-MIB::pcubeEngageMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (60)
.1.3.6.1.4.1.5655.2.4
.1.3.6.1.4.1.5655.2.4.3
.1.3.6.1.4.1.5655.2.4.3.1
.1.3.6.1.4.1.5655.2.4.3.2
.1.3.6.1.4.1.5655.4.2
.1.3.6.1.4.1.5655.4.2.1
.1.3.6.1.4.1.5655.4.2.1.1
.1.3.6.1.4.1.5655.4.2.2
.1.3.6.1.4.1.5655.4.2.2.1
.1.3.6.1.4.1.5655.4.2.2.1.1
.1.3.6.1.4.1.5655.4.2.2.1.1.1
.1.3.6.1.4.1.5655.4.2.2.1.1.10
.1.3.6.1.4.1.5655.4.2.2.1.1.2
.1.3.6.1.4.1.5655.4.2.2.1.1.3
.1.3.6.1.4.1.5655.4.2.2.1.1.4
.1.3.6.1.4.1.5655.4.2.2.1.1.5
.1.3.6.1.4.1.5655.4.2.2.1.1.6
.1.3.6.1.4.1.5655.4.2.2.1.1.7
.1.3.6.1.4.1.5655.4.2.2.1.1.8
.1.3.6.1.4.1.5655.4.2.2.1.1.9
.1.3.6.1.4.1.5655.4.2.3
.1.3.6.1.4.1.5655.4.2.3.1
.1.3.6.1.4.1.5655.4.2.3.1.1
Integer32
.1.3.6.1.4.1.5655.4.2.3.1.1.1
Enumeration
.1.3.6.1.4.1.5655.4.2.3.1.1.2
.1.3.6.1.4.1.5655.4.2.3.1.1.3
.1.3.6.1.4.1.5655.4.2.3.1.1.4
.1.3.6.1.4.1.5655.4.2.3.2
.1.3.6.1.4.1.5655.4.2.3.2.1
.1.3.6.1.4.1.5655.4.2.3.2.1.1
.1.3.6.1.4.1.5655.4.2.3.2.1.10
.1.3.6.1.4.1.5655.4.2.3.2.1.2
.1.3.6.1.4.1.5655.4.2.3.2.1.3
.1.3.6.1.4.1.5655.4.2.3.2.1.4
.1.3.6.1.4.1.5655.4.2.3.2.1.5
.1.3.6.1.4.1.5655.4.2.3.2.1.6
.1.3.6.1.4.1.5655.4.2.3.2.1.7
.1.3.6.1.4.1.5655.4.2.3.2.1.8
.1.3.6.1.4.1.5655.4.2.3.2.1.9
.1.3.6.1.4.1.5655.4.2.4
.1.3.6.1.4.1.5655.4.2.4.1
.1.3.6.1.4.1.5655.4.2.4.1.1
Integer32
.1.3.6.1.4.1.5655.4.2.4.1.1.1
.1.3.6.1.4.1.5655.4.2.4.2
.1.3.6.1.4.1.5655.4.2.4.2.1
.1.3.6.1.4.1.5655.4.2.4.2.1.1
.1.3.6.1.4.1.5655.4.2.4.2.1.2
sessionsInteger32
.1.3.6.1.4.1.5655.4.2.4.2.1.3
secondsInteger32
.1.3.6.1.4.1.5655.4.2.4.2.1.4
.1.3.6.1.4.1.5655.4.2.5
.1.3.6.1.4.1.5655.4.2.5.1
.1.3.6.1.4.1.5655.4.2.5.1.1
Integer32
.1.3.6.1.4.1.5655.4.2.5.1.1.1
Enumeration
.1.3.6.1.4.1.5655.4.2.5.1.1.2
.1.3.6.1.4.1.5655.4.2.5.1.1.3
.1.3.6.1.4.1.5655.4.2.5.2
.1.3.6.1.4.1.5655.4.2.5.2.1
Integer32
.1.3.6.1.4.1.5655.4.2.5.2.1.1
Enumeration
.1.3.6.1.4.1.5655.4.2.5.2.1.2
.1.3.6.1.4.1.5655.4.2.5.2.1.3
Dependencies (6) 5 direct · 1 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. PCUBE-SMIcisco
  3. SNMPv2-CONFrfc
  4. SNMPv2-TCrfc
  5. SNMP-FRAMEWORK-MIBrfc
  6. PCUBE-SE-MIBcisco
  7. CISCO-SCAS-BB-MIBciscoselected
Compliance Statements (1)

OID .1.3.6.1.4.1.5655.2.4.3.2.1
A compliance statement defined in this MIB module,
for SCABB SNMP agents.
Required groups