CISCO-RTTMON-IP-EXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
33

crttMonIPEchoAdminTable

table
.1.3.6.1.4.1.9.9.572.1.1 · 1 row entry · 10 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk crttMonIPEchoAdminTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-RTTMON-IP-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-RTTMON-IP-EXT-MIB::crttMonIPEchoAdminTable' 
An extension of the rttMonEchoAdminTable, defined in
the CISCO-RTTMON-MIB, which provides the additional
capability of recording the addresses as IPv6 addresses,
plus other IPv6 and IP layer extension information
crttMonIPEchoAdminEntry row .1.3.6.1.4.1.9.9.572.1.1.1
A list of additional objects needed for IPv6 addresses.
Indexes
No indexes recorded
Column Syntax OID
crttMonIPEchoAdminTargetAddrType
An enumerated value which specifies the address type
of the target.
This object must be used along with the
crttMonIPEchoAdminTargetAddress
object as it identifies the address family of the
address specified by that ob…
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.572.1.1.1.1
crttMonIPEchoAdminTargetAddress
A string which specifies the address of the target.
This object, in conjunction with the
crttMonIPEchoAdminTargetAddrType object,
may be used to specify either an IPv6 or an IPv4 address and
is an alternative to the r…
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.572.1.1.1.2
crttMonIPEchoAdminSourceAddrType
An enumerated value which specifies the address type
of the source.
This object must be used along with the
crttMonIPEchoAdminSourceAddress
object as it identifies the address family of the
address specified by that obj…
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.572.1.1.1.3
crttMonIPEchoAdminSourceAddress
A string which specifies the address of the target.
This object, together with the
crttMonIPEchoAdminSourceAddrType object,
may be used to specify either an IPv6 or an IPv4 address and
is an alternative to the rttMonE…
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.572.1.1.1.4
crttMonIPEchoAdminNameServerAddrType
An enumerated value which specifies the address type
of the target.
This object must be used along with the
crttMonIPEchoAdminNameServerAddress
object as it identifies the address family of the
address specified by that…
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.572.1.1.1.5
crttMonIPEchoAdminNameServerAddress
A string which specifies the address of the target. This object,
together with the crttMonIPEchoAdminNameServerAddrType object,
may be used to specify either an IPv6 or an IPv4 address and is
an alternative to the rttMo…
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.572.1.1.1.6
crttMonIPEchoAdminLSPSelAddrType
An enumerated value which specifies the address type
of the target.
This object must be used along with the
crttMonIPEchoAdminLSPSelAddress
object as it identifies the address family of the
address specified by that obj…
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.572.1.1.1.7
crttMonIPEchoAdminLSPSelAddress
A string which specifies the address of the LSP Selector.
This object, in conjunction with the
crttMonIPEchoAdminLSPSelAddrType object,
may be used to specify either an IPv6 or an IPv4 address and is
an alternative to …
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.572.1.1.1.8
crttMonIPEchoAdminDscp
The DSCP value (either an IPv4 TOS octet or an IPv6 Traffic
Class octet) to be set in outgoing packets.
DIFFSERV-DSCP-TCDscpOrAnyr/w
Type Constraints:
range: -1..63
 .1.3.6.1.4.1.9.9.572.1.1.1.9
crttMonIPEchoAdminFlowLabel
The Flow Label in an IPv6 packet header.
IPV6-FLOW-LABEL-MIBIPv6FlowLabelOrAnyr/w
Type Constraints:
range: -1..1048575
 .1.3.6.1.4.1.9.9.572.1.1.1.10

crttMonIPLatestRttOperTable

table
.1.3.6.1.4.1.9.9.572.1.2 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk crttMonIPLatestRttOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-RTTMON-IP-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-RTTMON-IP-EXT-MIB::crttMonIPLatestRttOperTable' 
An extension of the rttMonLatestRttOperTable, defined in
the CISCO-RTTMON-MIB, which provides the additional
capability of specifying IPv6 addresses.
crttMonIPLatestRttOperEntry row .1.3.6.1.4.1.9.9.572.1.2.1
A list of objects required to support IPv6 addresses.
Indexes
Column Syntax OID
crttMonIPLatestRttOperAddressType
An enumerated value which specifies the address type
of the target.
This object must be used along with the
crttMonIPLatestRttOperAddress
object as it identifies the address family of the
address specified by that objec…
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.572.1.2.1.1
crttMonIPLatestRttOperAddress
A string which specifies the address of the target. This object,
together with the crttMonIPLatestRttOperAddressType object,
may be used to specify either an IPv6 or an IPv4 address and is
an alternative to the rttMonLa…
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.572.1.2.1.2

crttMonIPEchoPathAdminTable

table
.1.3.6.1.4.1.9.9.572.1.3 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk crttMonIPEchoPathAdminTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-RTTMON-IP-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-RTTMON-IP-EXT-MIB::crttMonIPEchoPathAdminTable' 
An extension of the rttMonEchoPathAdminTable, defined in
the CISCO-RTTMON-MIB, which provides the additional
capability of recording the hops as IPv6 addresses.
crttMonIPEchoPathAdminEntry row .1.3.6.1.4.1.9.9.572.1.3.1
A list of additional objects needed for IPv6 addresses.
Indexes
No indexes recorded
Column Syntax OID
crttMonIPEchoPathAdminHopAddrType
An enumerated value which specifies the address type
of the hop.
This object must be used along with the
crttMonIPEchoPathAdminHopAddress
object as it identifies the address family of the
address specified by that objec…
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.572.1.3.1.1
crttMonIPEchoPathAdminHopAddress
A string which specifies the address of the hop. This object,
together with the crttMonIPEchoPathAdminHopAddrType object,
may be used to specify either an IPv6 or an IPv4 address and is
an alternative to the
rttMonEc…
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.572.1.3.1.2

crttMonIPStatsCollectTable

table
.1.3.6.1.4.1.9.9.572.1.4 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk crttMonIPStatsCollectTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-RTTMON-IP-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-RTTMON-IP-EXT-MIB::crttMonIPStatsCollectTable' 
An extension of the rttMonStatsCollectTable, defined in
the CISCO-RTTMON-MIB, which provides the additional
capability of specifying the collection address as an
IPv6 address.
crttMonIPStatsCollectEntry row .1.3.6.1.4.1.9.9.572.1.4.1
A list of additional objects needed for IPv6 addresses.
Indexes
No indexes recorded
Column Syntax OID
crttMonIPStatsCollectAddressType
An enumerated value which specifies the address type
of the target.
This object must be used along with the
crttMonIPStatsCollectAddress
object as it identifies the address family of the
address specified by that object…
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.572.1.4.1.1
crttMonIPStatsCollectAddress
A string which specifies the address of the collection target.
This object, in conjunction with the
crttMonIPStatsCollectAddressType object,
may be used to specify either an IPv6 or an IPv4 address and is
an alternativ…
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.572.1.4.1.2

crttMonIPLpdGrpStatsTable

table
.1.3.6.1.4.1.9.9.572.1.5 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk crttMonIPLpdGrpStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-RTTMON-IP-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-RTTMON-IP-EXT-MIB::crttMonIPLpdGrpStatsTable' 
An extension of the rttMonLpdGrpStatsTable, defined in
the CISCO-RTTMON-MIB, which provides the additional
capability of specifying the target PE address as an
IPv6 address.
crttMonIPLpdGrpStatsEntry row .1.3.6.1.4.1.9.9.572.1.5.1
A list of additional objects needed for IPv6 addresses.
Indexes
No indexes recorded
Column Syntax OID
crttMonIPLpdGrpStatsTargetPEAddrType
An enumerated value which specifies the address type
of the target.
This object must be used along with the
crttMonIPLpdGrpStatsTargetPEAddr
object as it identifies the address family of the
address specified by that ob…
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.572.1.5.1.1
crttMonIPLpdGrpStatsTargetPEAddr
A string which specifies the address of the target PE.
This object, in conjunction with the
crttMonIPLpdGrpStatsTargetPEAddrType object,
may be used to specify either an IPv6 or an IPv4 address and is
an alternative to…
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.572.1.5.1.2

crttMonIPHistoryCollectionTable

table
.1.3.6.1.4.1.9.9.572.1.6 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk crttMonIPHistoryCollectionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-RTTMON-IP-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-RTTMON-IP-EXT-MIB::crttMonIPHistoryCollectionTable' 
An extension of the rttMonHistoryCollectionTable, defined in
the CISCO-RTTMON-MIB, which provides the additional
capability of specifying the target address as an
IPv6 address.
crttMonIPHistoryCollectionEntry row .1.3.6.1.4.1.9.9.572.1.6.1
A list of additional objects needed for IPv6 addresses.
Indexes
No indexes recorded
Column Syntax OID
crttMonIPHistoryCollectionAddrType
An enumerated value which specifies the address type
of the target.
This object must be used along with the
crttMonIPHistoryCollectionAddress
object as it identifies the address family of the
address specified by that o…
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.572.1.6.1.1
crttMonIPHistoryCollectionAddress
A string which specifies the address of the target.
This object, in conjunction with the
crttMonIPHistoryCollectionAddrType object,
may be used to specify either an IPv6 or an IPv4 address and is
an alternative to the …
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.572.1.6.1.2

cipslaPercentileConfigTable

table
.1.3.6.1.4.1.9.9.572.1.7 · 1 row entry · 6 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cipslaPercentileConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-RTTMON-IP-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-RTTMON-IP-EXT-MIB::cipslaPercentileConfigTable' 
A table that contains percentile configurations. Each
conceptual row corresponds to the percentile
configuration for the probe defined in rttMonCtrlAdminTable.
cipslaPercentileConfigEntry row .1.3.6.1.4.1.9.9.572.1.7.1
A list of objects that define a conceptual percentile
configuration control row.
Indexes
Column Syntax OID
cipslaPercentileRTT
Specifies the percentile value to use in percentile
RTT calculations.
ex. A 90% level will discard the highest 10% of all RTT values
when calculating average RTT, max RTT, etc.
percentInteger32r/w
Constraints:
range: 90-100
 .1.3.6.1.4.1.9.9.572.1.7.1.1
cipslaPercentileOWSD
Specifies the percentile value to use in percentile
one-way source to destination delay calculations.

ex. A 90% level will discard the highest 10% of all
one-way source to destination values when calculat…
percentInteger32r/w
Constraints:
range: 90-100
 .1.3.6.1.4.1.9.9.572.1.7.1.2
cipslaPercentileOWDS
Specifies the percentile value to use in percentile
one-way destination to source delay calculations.

ex. A 90% level will discard the highest 10% of all
one-way destination to source values when calculat…
percentInteger32r/w
Constraints:
range: 90-100
 .1.3.6.1.4.1.9.9.572.1.7.1.3
cipslaPercentileJitterSD
Specifies the percentile value to use in percentile
one-way source to destination jitter calculations.

ex. A 90% level will discard the highest 10% of all
one-way source to destination jitter values when …
percentInteger32r/w
Constraints:
range: 90-100
 .1.3.6.1.4.1.9.9.572.1.7.1.4
cipslaPercentileJitterDS
Specifies the percentile value to use in percentile
one-way destination to source jitter calculations.

ex. A 90% level will discard the highest 10% of all
one-way destination to source jitter values when …
percentInteger32r/w
Constraints:
range: 90-100
 .1.3.6.1.4.1.9.9.572.1.7.1.5
cipslaPercentileJitterAvg
Specifies the percentile value to use in percentile
average jitter calculations.

ex. A 90% level will discard the highest 10% of all
jitter values in both directions when calculating average,
max, etc.
percentInteger32r/w
Constraints:
range: 90-100
 .1.3.6.1.4.1.9.9.572.1.7.1.6

cipslaPercentileLatestStatsTable

table
.1.3.6.1.4.1.9.9.572.1.8 · 1 row entry · 7 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cipslaPercentileLatestStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-RTTMON-IP-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-RTTMON-IP-EXT-MIB::cipslaPercentileLatestStatsTable' 
A table that contains percentile statistics. Each
conceptual row corresponds to a percentile configuration
for the probe defined in cipslaPercentileConfigTable.
          
For each percentile configuration for a probe there is an entry
in
the table.
Each Probe can have multiple percentile configurations and
hence
there can be multiple rows for a particular probe.
cipslaPercentileLatestStatsEntry row .1.3.6.1.4.1.9.9.572.1.8.1
A collection of objects that record the latest jitter
operation.

An entry is created only when the following
objects are valid and when the given percentile
type is configured to a non-default value.
…
Indexes
Column Syntax OID
cipslaPercentileTypeVar
This object specifies the type of percentile statistic
configured for a probe.

The percentile stat types 'rtt', 'owsd', 'owds', 'jittersd',
'jitterds' and 'jitteravg' may be configured for UDP jitter,
ICM…
Enumeration
Enumerated Values:
1rtt
2owsd
3owds
4jittersd
5jitterds
6jitteravg
 .1.3.6.1.4.1.9.9.572.1.8.1.1
cipslaPercentileLatestMin
The minimum time of all retained samples.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.572.1.8.1.2
cipslaPercentileLatestMax
The maximum time of all retained samples.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.572.1.8.1.3
cipslaPercentileLatestAvg
The average time of all retained samples.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.572.1.8.1.4
cipslaPercentileLatestNum
The number of retained samples.
packetsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.572.1.8.1.5
cipslaPercentileLatestSum
The sum of times of retained samples.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.572.1.8.1.6
cipslaPercentileLatestSum2
The sum of squares of times of retained samples.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.572.1.8.1.7