CISCO-REPEATER-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
15
ciscoRptrPortTable
table
.1.3.6.1.4.1.9.9.22.1.1
·
1 row entry
·
15 columns
Uses the cisco variant from
Command help
/opt/observium/mibs/cisco.
Walk ciscoRptrPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-REPEATER-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-REPEATER-MIB::ciscoRptrPortTable'
Table of descriptive and status information about the ports.
An entry in the table, containing information
about a single port.
about a single port.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
This object indicates the port's MDI/MDI-X switching status.
The normal(1) status indicates the port is configured to be standard MDI as defined by the 10BaseT Standard for hub port (allowing for connection to a chai… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.9.9.22.1.1.1.1 |
||||||
|
Specifies whether or not Link Integrity Test Function is
enabled for the port as specified by the 10BaseT Standard. When the link test function is enabled, the absence of the Link Test pulses and receive data on the … |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.9.9.22.1.1.1.2 |
||||||
|
This object indicates the status of the Link Test function
for the port. Set to false indicates valid data or 4 consecutive Link Test pulses have been detected on the port. Set to true indicates the failure of the Li… |
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.9.9.22.1.1.1.3 |
||||||
|
Specifies whether or not the Automatic Receiver Polarity
Reversal is enabled for the port. This feature provides the ability to invert the polarity of the signals appearing at the RXD+/- pair of the port prior to re… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.9.9.22.1.1.1.4 |
||||||
|
This object indicates the status of the Automatic Receiver
Polarity Reversal for the port. Set to true indicates the polarity of the port has been detected as reversed and is corrected. Set to false indicates the pola… |
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.9.9.22.1.1.1.5 |
||||||
|
Specifies whether or not the Source Address Control feature is
enabled for the port. This feature provides the ability to control which device's specific MAC address is allowed access to the network. If the managem… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.9.9.22.1.1.1.6 |
||||||
|
For write access, this object is the allowed source address
that is to be configured for source address control feature for the port. For read access, if no allowed source address was specifically spec… |
OctetStringr/w Constraints: range: 0-0range: 6-6 |
.1.3.6.1.4.1.9.9.22.1.1.1.7 |
||||||
|
This object indicates the status of ciscoRptrPortAllowedSrcAddr
for the port. allowedSrcAddrConfig(1) status indicates that the allowed source address was explicitly configured by management entity. The allowedSrcAd… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.9.9.22.1.1.1.8 |
||||||
|
This object is the last illegal source address which caused
this port to be partitioned. If the port is never partitioned due to Source Address Control, the agent shall return a string of length zero. |
OctetString Constraints: range: 0-0range: 6-6 |
.1.3.6.1.4.1.9.9.22.1.1.1.9 |
||||||
|
Specifies whether an acknowledgment is sent by an NMS to
indicate that an illegal source address trap was received. acked : Set by a NMS to acknowledge reception of an illegal source address. Wh… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.9.22.1.1.1.10 |
||||||
|
Specifies whether or not to send the illegal source
address trap for the port. When it is enabled, one or more illegal source address traps will be generated if there is a mismatch of source address. … |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.9.9.22.1.1.1.11 |
||||||
|
This is the time stamp for the very first time when
the current illegal source address was detected on the port. The time stamp is given by the value of MIB-II's sysUpTime at which this occurrence happens. If no ille… |
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.9.9.22.1.1.1.12 |
||||||
|
This is the time stamp for the last time when the
current illegal source address was detected on the port. The time stamp is given by the value of MIB-II's sysUpTime at which occurrence happens. If no illegal source… |
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.9.9.22.1.1.1.13 |
||||||
|
This is the count of consecutive occurrences of
the last illegal source address on the port. When illegal address is detected, this count will be incremented about every minute. |
SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.22.1.1.1.14 |
||||||
|
This is the total count of all cccurences of any
illegal source addresses heard on the port since start-up. Note: Illegal source addresses may be different, may be the same. This counter is a *tota… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.22.1.1.1.15 |
