CISCO-RADIUS-MIB Table View

This table lists RADIUS servers.

crRadiusServerEntry row .1.3.6.1.4.1.9.9.288.1.2.2.1

A RADIUS server table entry.

Users can add/delete entries in this table using object
'crRadiusServerRowStatus'.

An entry cannot be created until following objects are
instantiated :
- crRadiu…

Indexes

crRadiusServerIndex

Column	Syntax	OID
crRadiusServerIndex An arbitrary integer value, greater than zero, and less than and equal to crRadiusServerTableMaxEntries, which identifies a RADIUS Server in this table. The value of this object must be persistent across reboots/reinit…	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.288.1.2.2.1.1
crRadiusServerAddrType The type of address of the RADIUS Server as specified by object 'crRadiusServerAddr'.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.288.1.2.2.1.2
crRadiusServerAddr The address of the RADIUS Server.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.288.1.2.2.1.3
crRadiusServerAuthPort This is the destination UDP port number to which RADIUS authentication messages should be sent. The RADIUS server will not be used for authentication if this port number is 0.	CISCO-TCCiscoPortr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.9.288.1.2.2.1.4
crRadiusServerAcctPort This is the destination UDP port number to which RADIUS accounting messages should be sent.	CISCO-TCCiscoPortr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.9.288.1.2.2.1.5
crRadiusServerKey The key used in encrypting the packets passed between the RADIUS server and the client. This key must match the one configured on the server. A zero-length string is always returned when this object is …	CiscoRadiusAuthKeyr/w Type Constraints: range: 0..65	.1.3.6.1.4.1.9.9.288.1.2.2.1.6
crRadiusServerType Type of the RADIUS server. other (1), - a lower priority server primary (2) - the primary server which is tried first by the RADIUS client.	Enumerationr/w Enumerated Values: 1 other 2 primary	.1.3.6.1.4.1.9.9.288.1.2.2.1.7
crRadiusServerMode Mode of the RADIUS server. none (1) - neither authentication nor accounting authAndAcct (2) - both authentication and accounting authOnly (3) - only for authentication acc…	Enumerationr/w Enumerated Values: 1 none 2 authAndAcct 3 authOnly 4 acctOnly	.1.3.6.1.4.1.9.9.288.1.2.2.1.8
crRadiusServerRowStatus Status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.288.1.2.2.1.9
crRadiusServerRTTThldNorm This object represents the normal threshold on the round-trip time of RADIUS authentication messages. This is measured as a percentage of configured round-trip time as per RFC-2865. If the round-trip time is less than o…	percentCiscoRadiusRoundTripTimePercentr/w Type Constraints: range: 1..100	.1.3.6.1.4.1.9.9.288.1.2.2.1.10
crRadiusServerRTTThldHi This object represents the high threshold on the round-trip time of RADIUS authentication messages. This is measured as a percentage of configured round-trip time as per RFC-2865. If the round-trip time is greater than …	percentCiscoRadiusRoundTripTimePercentr/w Type Constraints: range: 1..100	.1.3.6.1.4.1.9.9.288.1.2.2.1.11
crRadiusServerRetransThldNorm This object represents the normal threshold on the retransmitted RADIUS authentication messages per session. This is measured as a percentage of crRadiusRetransmits. If the number of retransmits is less than or equal to…	percentCiscoRadiusRetransPercentr/w Type Constraints: range: 1..100	.1.3.6.1.4.1.9.9.288.1.2.2.1.12
crRadiusServerRetransThldHi This object represents the high threshold on the retransmitted RADIUS authentication messages per session. This is measured as a percentage of crRadiusRetransmits. If the number of retransmits is greater than or equal t…	percentCiscoRadiusRetransPercentr/w Type Constraints: range: 1..100	.1.3.6.1.4.1.9.9.288.1.2.2.1.13

A table containing VLAN Group Mapping information for the
purpose of distributing users across multiple VLANs which
have the same group name.

crVlanGroupEntry row .1.3.6.1.4.1.9.9.288.1.4.2.1

An entry containing an VLAN Group Mapping information
applicable to a particular VLAN. Entries in this table can
be created or deleted using cpaeVlanGroupRowStatus object.

Indexes

crVlanGroupName

Column	Syntax	OID
crVlanGroupName Specifies the name of the VLAN group.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.288.1.4.2.1.1
crVlanGroupVlansLow A string of octets containing one bit per VLAN for VLANs with VlanIndex value of 0 to 2047. Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 0 through 7,…	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.9.9.288.1.4.2.1.2
crVlanGroupVlansHigh A string of octets containing one bit per VLAN for VLANs with VlanIndex value of 2048 to 4095. Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2048 thro…	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.9.9.288.1.4.2.1.3
crVlanGroupRowStatus This object is used to manage the creation and deletion of rows in this table. The only way to create an entry is by setting the value createAndGo(4), and the only way to delete an entry is by setting the…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.288.1.4.2.1.4

This table contains the keep-alive information on
every RADIUS server configured on the system.

crRadiusKeepAliveServerEntry row .1.3.6.1.4.1.9.9.288.1.5.3.1

An entry containing keep-alive information of a
corresponding RADIUS server configured in
crRadiusServerTable.

Indexes

crRadiusServerIndex

Column	Syntax	OID
crRadiusKeepAliveServerStatus Indicates the current keep-alive status of the RADIUS server. other : none of the following. init : the server is in init state. active : the server is in active state. checkup: the server is in checku…	Enumeration Enumerated Values: 1 other 2 init 3 active 4 checkup 5 dead	.1.3.6.1.4.1.9.9.288.1.5.3.1.1