CISCO-PORT-TRACK-MIB

A MIB to configure the Port-Track feature.
        
        When a link goes down, all the services which depend 
        on the link are notified of the outage. The loss of
        this link may be an indirect failure to the end devices 
        attached to the switch. The concept behind the Port-Track  
        feature is to create a direct failure on the ports  
        connected to end devices on event of such indirect 
        failures.
        
        One more ports can be 'tracked' in terms of their 
        operational status. The cptPortTrackTable lets the user
        associate which port(s) need to be tracked to the ports 
        that will be tracking them. 
        
        cptPortForceShutTable, lets the user configure the 
        forced-shut mode of the linked-port.

Imported Objects

ciscoMgmtCISCO-SMI
VsanIndexCISCO-ST-TC
InterfaceIndexIF-MIB
MODULE-COMPLIANCE, OBJECT-GROUPSNMPv2-CONF
MODULE-IDENTITY, OBJECT-TYPESNMPv2-SMI
TruthValue, RowStatusSNMPv2-TC
ciscoPortTrackMIB .1.3.6.1.4.1.9.9.437
ciscoPortTrackObjects .1.3.6.1.4.1.9.9.437.1
cptConfig .1.3.6.1.4.1.9.9.437.1.1
cptPortTrackTable .1.3.6.1.4.1.9.9.437.1.1.1
cptPortTrackEntry .1.3.6.1.4.1.9.9.437.1.1.1.1
cptPortTrackLinkedPort .1.3.6.1.4.1.9.9.437.1.1.1.1.1
cptPortTrackTrackedPort .1.3.6.1.4.1.9.9.437.1.1.1.1.2
cptPortTrackVsanType .1.3.6.1.4.1.9.9.437.1.1.1.1.3
cptPortTrackVsanIndex .1.3.6.1.4.1.9.9.437.1.1.1.1.4
cptPortTrackRowStatus .1.3.6.1.4.1.9.9.437.1.1.1.1.5
cptPortForceShutTable .1.3.6.1.4.1.9.9.437.1.1.2
cptPortForceShutEntry .1.3.6.1.4.1.9.9.437.1.1.2.1
cptPortForceState .1.3.6.1.4.1.9.9.437.1.1.2.1.1
cptMIBConformance .1.3.6.1.4.1.9.9.437.2
cptMIBCompliances .1.3.6.1.4.1.9.9.437.2.1
cptMIBGroups .1.3.6.1.4.1.9.9.437.2.2