CISCO-PNNI-MIB Table View

A table of cisco specific attributes that affect the
operation of a PNNI logical node.

ciscoPnniNodeEntry row .1.3.6.1.4.1.9.9.65.1.2.1.1

An entry in the table, containing cisco specific
information about a node in this switching system.

Indexes

No indexes recorded

Column	Syntax	OID
ciscoPnniNodeAutoSummary Specifies whether automatic generation of internal summary address(es) based on the switch address(es) or node ID is enabled. Automatically generated summary addresses can only be removed by setting this object to `fal…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.65.1.2.1.1.1
ciscoPnniNodeRedistributeStatic Specifies whether redistribution of ATM static routes to the PNNI routing domain is enabled. Exterior static routes are advertised in exterior reachable address PTSEs. Internal static routes are advertised in internal…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.65.1.2.1.1.2
ciscoPnniNodePtseRequest Specifies the maximum number of PTSEs that can be requested in one PTSE request packet.	Integer32r/w Constraints: range: 1-1000	.1.3.6.1.4.1.9.9.65.1.2.1.1.3
ciscoPnniNodeName Specifies the textual name of the PNNI node. The node name is distributed to all other nodes via PNNI flooding, using a cisco specific encoding in the System Capabilities information group. This allows all cisco PNNI …	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.65.1.2.1.1.4
ciscoPnniNodeScopeMappingMode Specifies the configuration mode of the mapping from organizational scope values (used at UNI interfaces) to PNNI scope (i.e., in terms of PNNI routing level indicators). In `automatic' mode, for each org…	Enumerationr/w Enumerated Values: 1 automatic 2 manual	.1.3.6.1.4.1.9.9.65.1.2.1.1.5

A table of cisco specific attributes used to configure a
physical interface or subinterface on a switching system
which is capable of being used for PNNI routing.
Interfaces may represent physical connection points (i.e.
copper/fiber connection points) or VPCs which have been
configured for PNNI's use.

ciscoPnniIfEntry row .1.3.6.1.4.1.9.9.65.1.3.1.1

An entry in the table, containing cisco specific PNNI
information about an interface in this switching system.

Indexes

No indexes recorded

Column	Syntax	OID
ciscoPnniIfLinkSelection For CBR or VBR call setups, specifies a method for selecting one link out of multiple links with sufficient resources to the same neighbor node. Link selection applies whenever the port specified in the Designated Tran…	Enumerationr/w Enumerated Values: 1 adminWeightMinimize 2 blockingMinimize 3 transmitSpeedMaximize 4 loadBalance	.1.3.6.1.4.1.9.9.65.1.3.1.1.1
ciscoPnniIfRouteOptimization To enable or disable the route optimization (automatic rerouting) feature on an ATM interface. To disable route optimization on the interface, set this object to 'disable'. To enable rou…	Enumerationr/w Enumerated Values: 1 disable 2 soft 3 switched 4 switchedAndSoft	.1.3.6.1.4.1.9.9.65.1.3.1.1.2
ciscoPnniIfRouteOptimInterval Specifies how often route optimization takes place on this interface. This object applies only when the object ciscoPnniIfRouteOptimization is NOT set to 'disable'.	minutesInteger32r/w Constraints: range: 10-10000	.1.3.6.1.4.1.9.9.65.1.3.1.1.3
ciscoPnniIfRouteOptimStartHour Specifies the start hour of Time-of-Day route optimization on an ATM interface. This object applies only when the object ciscoPnniIfRouteOptimization is NOT set to 'disable'.	hourInteger32r/w Constraints: range: 0-23	.1.3.6.1.4.1.9.9.65.1.3.1.1.4
ciscoPnniIfRouteOptimStartMinute Specifies the start minute of Time-of-Day route optimization on an ATM interface. This object applies only when the object ciscoPnniIfRouteOptimization is NOT set to 'disable'.	minutesInteger32r/w Constraints: range: 0-59	.1.3.6.1.4.1.9.9.65.1.3.1.1.5
ciscoPnniIfRouteOptimEndHour Specifies the end hour of Time-Of-Day route optimization on an ATM interface. This object applies only when the object ciscoPnniIfRouteOptimization is NOT set to 'disable'.	hourInteger32r/w Constraints: range: 0-23	.1.3.6.1.4.1.9.9.65.1.3.1.1.6
ciscoPnniIfRouteOptimEndMinute Specifies the end minute of Time-Of-Day route optimization on an ATM interface. This object applies only when the object ciscoPnniIfRouteOptimization is NOT set to 'disable'.	minutesInteger32r/w Constraints: range: 0-59	.1.3.6.1.4.1.9.9.65.1.3.1.1.7

A table that specifies the precedence of different types
of reachable addresses.

ciscoPnniPrecedenceEntry row .1.3.6.1.4.1.9.9.65.1.4.1.1

An entry in the table, containing information about the
precedence of a specific reachable address type. One row
is created by the managed system for each reachable
address type.

Indexes

ciscoPnniPrecedenceAddressType

Column	Syntax	OID
ciscoPnniPrecedenceAddressType The reachable address type for which the precedence is specified.	Enumeration Enumerated Values: 1 staticLocalInternalWithMetrics 2 staticLocalExterior 3 staticLocalExteriorWithMetrics 4 pnniRemoteInternal 5 pnniRemoteInternalWithMetrics 6 pnniRemoteExterior 7 pnniRemoteExteriorWithMetrics	.1.3.6.1.4.1.9.9.65.1.4.1.1.1
ciscoPnniPrecedenceValue Specifies the precedence of a reachable address type. When there are multiple reachable address types associated with the longest match reachable address prefix, the route selection algorithm first attempts to find rout…	Integer32r/w Constraints: range: 2-4	.1.3.6.1.4.1.9.9.65.1.4.1.1.2

A table of cisco specific attributes used to configure
cisco specific properties of ATM static routes.

ciscoPnniRouteAddrEntry row .1.3.6.1.4.1.9.9.65.1.5.1.1

An entry in the table, containing cisco specific PNNI
information about a reachable address prefix.

Indexes

No indexes recorded

Column	Syntax	OID
ciscoPnniRouteAddrForwardingE164Address The native E.164 address used as the called party address when the call matching pnniRouteAddrAddress is forwarded across the interface identified by pnniRouteAddrIfIndex. If this address is specified, th…	E164Addressr/w Type Constraints: range: 0 range: 8	.1.3.6.1.4.1.9.9.65.1.5.1.1.1