CISCO-PING-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
17

ciscoPingTable

table
.1.3.6.1.4.1.9.9.16.1.1 · 1 row entry · 17 columns
Open in standard view 
A table of ping request entries.
ciscoPingEntry entry .1.3.6.1.4.1.9.9.16.1.1.1
A ping request entry.

A management station wishing to create an entry should
first generate a pseudo-random serial number to be used
as the index to this sparse table. The station should
then create the as…
Indexes
ciscoPingSerialNumber
Column Syntax OID
ciscoPingSerialNumber
Object which specifies a unique entry in the
ciscoPingTable. A management station wishing
to initiate a ping operation should use a
pseudo-random value for this object when creating
or modifying an instance of a ciscoP…
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.9.9.16.1.1.1.1
ciscoPingProtocol
The protocol to use.
Once an instance of this object is created, its
value can not be changed.
CISCO-TCCiscoNetworkProtocolr/w
Textual Convention: CISCO-TCCiscoNetworkProtocol Enumeration
Type Values:
1ip
2decnet
3pup
4chaos
5xns
6x121
7appletalk
8clns
9lat
10vines
11cons
12apollo
13stun
14novell
15qllc
16snapshot
17atmIlmi
18bstun
19x25pvc
20ipv6
21cdm
22nbf
23bpxIgx
24clnsPfx
25http
65535unknown
 .1.3.6.1.4.1.9.9.16.1.1.1.2
ciscoPingAddress
The address of the device to be pinged.
An instance of this object cannot be created until the
associated instance of ciscoPingProtocol is created.
CISCO-TCCiscoNetworkAddressr/w
Textual Convention: CISCO-TCCiscoNetworkAddress OctetString
 .1.3.6.1.4.1.9.9.16.1.1.1.3
ciscoPingPacketCount
Specifies the number of ping packets to send to the target
in this sequence.
Integer32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.9.9.16.1.1.1.4
ciscoPingPacketSize
Specifies the size of ping packets to send to the target
in this sequence. The lower and upper boundaries of this
object are protocol-dependent.
An instance of this object cannot be modified unless the
associated insta…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.16.1.1.1.5
ciscoPingPacketTimeout
Specifies the amount of time to wait for a response to a
transmitted packet before declaring the packet 'dropped.'
millisecondsInteger32r/w
Constraints:
range: 0-3600000
 .1.3.6.1.4.1.9.9.16.1.1.1.6
ciscoPingDelay
Specifies the minimum amount of time to wait before sending
the next packet in a sequence after receiving a response or
declaring a timeout for a previous packet. The actual delay
may be greater due to internal task sc…
millisecondsInteger32r/w
Constraints:
range: 0-3600000
 .1.3.6.1.4.1.9.9.16.1.1.1.7
ciscoPingTrapOnCompletion
Specifies whether or not a ciscoPingCompletion trap should
be issued on completion of the sequence of pings. If such a
trap is desired, it is the responsibility of the management
entity to ensure that the SNMP administ…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.16.1.1.1.8
ciscoPingSentPackets
The number of ping packets that have been sent to the target
in this sequence.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.16.1.1.1.9
ciscoPingReceivedPackets
The number of ping packets that have been received from the
target in this sequence.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.16.1.1.1.10
ciscoPingMinRtt
The minimum round trip time of all the packets that have
been sent in this sequence.

This object will not be created until the first ping
response in a sequence is received.
millisecondsSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.16.1.1.1.11
ciscoPingAvgRtt
The average round trip time of all the packets that have
been sent in this sequence.

This object will not be created until the first ping
response in a sequence is received.
millisecondsSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.16.1.1.1.12
ciscoPingMaxRtt
The maximum round trip time of all the packets that have
been sent in this sequence.

This object will not be created until the first ping
response in a sequence is received.
millisecondsSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.16.1.1.1.13
ciscoPingCompleted
Set to true when all the packets in this sequence have been
either responded to or timed out.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.16.1.1.1.14
ciscoPingEntryOwner
The entity that configured this entry.
IF-MIBOwnerStringr/w
Textual Convention: IF-MIBOwnerString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.16.1.1.1.15
ciscoPingEntryStatus
The status of this table entry. Once the entry status is
set to active, the associate entry cannot be modified until
the sequence completes (ciscoPingCompleted is true).
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.16.1.1.1.16
ciscoPingVrfName
This field is used to specify the VPN name in
which the ping will be used. For regular ping this
field should not be configured. The agent will use
this field to identify the VPN routing Table for
this ping. This is t…
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.9.9.16.1.1.1.17