CISCO-PFR-MIB Table View

This table lists the MC instances created by the system.

cpfrMCEntry row .1.3.6.1.4.1.9.9.772.1.1.1

An entry describing the configuration and status of one PfR
MC.

A simple device may only support a single MC, where a more
sophisticate device may support more than one MC.

A peer SNMP entity m…

Indexes

cpfrMCIndex

Column	Syntax	OID
cpfrMCIndex This object indicates an arbitrary integer-value that uniquely identifies a PfR MC.	PfRMasterControllerIndex Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.9.9.772.1.1.1.1
cpfrMCStorageType This object specifies the memory realization of the row. The following columnar objects are allowed to be writable when the storageType of this entry is permanent(4): cpfrMCMapIndex, cpfrMCKeepAliveTimer, cpfrMCMaxPref…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.772.1.1.1.2
cpfrMCRowStatus This object specifies the status of a row in the MC table. The following columnar objects must be valid in order to transition the row to the active state: None. The following columnar objects can be mo…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.772.1.1.1.3
cpfrMCMapIndex This object indicates a set of PfR policy map entries in cpfrMapTable associated with the MC. A value of zero indicates that there is no policy map associated with the MC and that the values in the default policy shoul…	PfrMapIndexOrZeror/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.772.1.1.1.4
cpfrMCKeepAliveTimer This object specifies the value of the PfR keepalive timer. The MC sends keepalive packets to BRs to maintain connectivity between the MC and the BR. If the MC does not receive keepalive packets from a BR before the ke…	secondsUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.1.1.5
cpfrMCMaxPrefixTotal This object specifies the maximum number of prefixes that a PfR MC will monitor. Limiting the number of prefixes a MC will monitor and learn reduces memory and system resource consumption.	prefixesUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.1.1.6
cpfrMCMaxPrefixLearn This object specifies the maximum number of prefixes that a PfR MC will learn.	prefixesUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.1.1.7
cpfrMCEntranceLinksMaxUtil This object specifies the maximum utilization threshold of incoming traffic that can be transmitted over a PfR-managed entrance link interface.	percentUnsigned32r/w Constraints: range: 1-100	.1.3.6.1.4.1.9.9.772.1.1.1.8
cpfrMCExitLinksMaxUtil This object specifies the maximum utilization of outbound traffic that can be transmitted over a PfR-managed exit interface.	percentUnsigned32r/w Constraints: range: 1-100	.1.3.6.1.4.1.9.9.772.1.1.1.9
cpfrMCPortNumber This object specifies a dynamic port number for communication between a PfR MC and a PfR BR.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.9.772.1.1.1.10
cpfrMCTracerouteProbeDelay This object specifies the time interval between traceroute probe cycles.	millisecondsUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.1.1.11
cpfrMCRsvpPostDialDelay This object specifies the delay before PfR returns the default routing path to RSVP.	millisecondsUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.1.1.12
cpfrMCRsvpSignalingRetries This object specifies the number of retries that RSVP will query PfR for the alternate path.	retriesUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.1.1.13
cpfrMCNetflowExporter This object specifies the name of PfR Netflow exporter.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.772.1.1.1.14
cpfrMCAdminStatus This object can be used to enable or disable PfR operation in the system. 'enable' Enable MC on the router. 'disable' Disable MC on the router.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.9.9.772.1.1.1.15
cpfrMCOperStatus This object indicates the operational status of PfR MC. 'active' MC is active. 'inactive' MC is not active.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.9.9.772.1.1.1.16
cpfrMCConnStatus This object indicates the state of the connection between MC and BRs. 'success' MC is successfully connected to at least one BR. 'closed' MC is not connected to any BR.	Enumeration Enumerated Values: 1 success 2 closed	.1.3.6.1.4.1.9.9.772.1.1.1.17
cpfrMCNumofBorderRouters This object indicates the number of BRs that peer with the MC.	border routersUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.1.1.18
cpfrMCNumofExits This object indicates the total number of PfR external interfaces configured on a MC.	exitsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.1.1.19
cpfrMCLearnState This object indicates the status of PfR learning operation. 'disable' PfR learning mode is not enabled. 'started' PfR is learning TCs. 'writing' PfR is storing the l…	Enumeration Enumerated Values: 1 disabled 2 started 3 writing 4 sleep 5 retry	.1.3.6.1.4.1.9.9.772.1.1.1.20
cpfrMCLearnStateTimeRemain This object indicates time remaining in the current prefix learning period measured in seconds.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.772.1.1.1.21
cpfrMCPrefixCount This object indicates the total number of prefixes PfR is monitoring.	prefixesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.772.1.1.1.22
cpfrMCPrefixLearned This object indicates the number of prefixes PfR has learned.	prefixesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.772.1.1.1.23
cpfrMCPrefixConfigured This object indicates the number of configured prefixes PfR is monitoring.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.772.1.1.1.24
cpfrMCPbrMet This object indicates whether the PBR requirements have been met. If PBR requirements are not met, the BRs cannot communicate with each other over the internal interfaces and cannot redirect traffic to each other using…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.772.1.1.1.25
cpfrMCLoggingAdminStatus This object specifies whether logging is enabled or not on PfR MC. 'enable' logging is enabled. 'disable' logging is disabled.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.9.9.772.1.1.1.26
cpfrMCControlMode This object specifies PfR MC control-mode. 'observe' PfR doesn't control traffic classes, but observes them. 'control' PfR controls traffic classes.	Enumerationr/w Enumerated Values: 1 observe 2 control	.1.3.6.1.4.1.9.9.772.1.1.1.27
cpfrMCClear This object specifies the clear operation that an MC should perform. A read on this object will return the last successful clear operation performed by the master controller. 'none' No clear operation…	Enumerationr/w Enumerated Values: 1 none 2 clearAll 3 clearAllPrefixes 4 clearAllBorders	.1.3.6.1.4.1.9.9.772.1.1.1.28
cpfrMCLastClearTime This object indicates the value of sysUpTime the last time the MC successfully performed a clear operation.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.772.1.1.1.29
cpfrMCNotifisControl This object specifies whether PfR notifications is enabled or not from PfR MC. 'enable' notification is enabled. 'disable' notification is disabled.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.9.9.772.1.1.1.30
cpfrMCChangeConfigType This object indicates which of the following configuration is changed. 'cpfrMCLoggingAdminStatus' cpfrMCLoggingAdminStatus is changed. 'cpfrMCAdminStatus' cpfrMCAdminStatus is changed…	Enumeration Enumerated Values: 1 cpfrMCLoggingAdminStatus 2 cpfrMCAdminStatus 3 cpfrMCControlMode 4 cpfrMCClear	.1.3.6.1.4.1.9.9.772.1.1.1.31
cpfrMCChangeConfigValue This object indicates the value to which the type of configuration specified in cpfrMCChangeConfigType, is changed.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.9.772.1.1.1.32

This table lists the PfR map instances created by the system.
          
This table has a sparse expansion dependent relationship on
cpfrMCTable, containing one or more rows for each cpfrMCEntry.

cpfrMapEntry row .1.3.6.1.4.1.9.9.772.1.2.1

An entry describing the configuration of one PfR map.

A device creates a row in a cpfrMapTable when it specifies a
PfR map. Likewise, such a device destroys a row in the
cpfrBRTable when removing a PfR ma…

Indexes

cpfrMapIndex cpfrMapPolicyIndex

Column	Syntax	OID
cpfrMapIndex This object indicates an arbitrary integer-value that uniquely identifies a set of PfR policy maps.	PfrMapIndex Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.9.9.772.1.2.1.1
cpfrMapPolicyIndex This object indicates an arbitrary integer-value that, in combination with cpfrMapIndex, uniquely identifies a PfR policy map.	PfrMapPolicyIndex Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.9.9.772.1.2.1.2
cpfrMapStorageType This object specifies the memory realization of the row. The following columnar objects are allowed to be writable when the storageType of this entry is permanent(4): cpfrMapIndex, cpfrMapPolicyIndex, cpfrMapStorageTyp…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.772.1.2.1.3
cpfrMapRowStatus This object specifies the status of a row in the PfR map table. The following columnar objects must be valid in order to transition the row to the active state: cpfrMapName. The following columnar object…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.772.1.2.1.4
cpfrMapName This object specifies the name of a PfR map.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.772.1.2.1.5
cpfrMapBackoffMinTimer This object specifies the minimum value for the backoff timer. The backoff timer is used to configure a PfR map to set the transition period for which the MC holds an out-of-policy prefix.	secondsUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.2.1.6
cpfrMapBackoffMaxTimer This object specifies the maximum value for the backoff timer. If the maximum timer expires and all PfR-managed exits are out-of-policy, PfR will install the best available exit and reset the minimum timer.	secondsUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.2.1.7
cpfrMapBackoffStepTimer This object specifies the time period value for the step timer. PfR users the step timer to add time to the out-of-policy waiting period each time the backoff timer expires and PfR is unable to find an in-policy exit. …	secondsUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.2.1.8
cpfrMapDelayType This object specifies the delay type of a PfR map. It is used to set the delay threshold as a relative percentage or as an absolute value for match criteria.	PfrMetricPolicyTyper/w Type Values: 1 relative 2 threshold	.1.3.6.1.4.1.9.9.772.1.2.1.9
cpfrMapDelayRelativePercent This object specifies a relative delay threshold based on a comparison of short-term and long-term delay percentages. The value of this object is valid if the corresponding value of cpfrMapDelayType is set to 'relative…	tenths of percentUnsigned32r/w Constraints: range: 1-1000	.1.3.6.1.4.1.9.9.772.1.2.1.10
cpfrMapDelayThresholdMax This object specifies the absolute maximum delay time. The value of this object is valid if the corresponding value of cpfrMapDelayType is set to 'threshold'.	millisecondsUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.2.1.11
cpfrMapHolddownTimer This object specifies the route dampening time period. It is used to configure the prefix route dampening timer for the minimum period of time in which a new exit must be used before an alternate exit can be selected.	secondsUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.2.1.12
cpfrMapPrefixForwardInterface This object specifies whether or not a null forwarding interface has been configured. This interface is always up and can never forward or receive traffic; encapsulation always fails. Null interfaces are used as a l…	CISCO-TCInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.9.9.772.1.2.1.13
cpfrMapJitterThresholdMax This object specifies the maximum tolerable jitter value permitted on an exit link.	millisecondsUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.2.1.14
cpfrMapLinkGroupName This object specifies the primary link group to be used by PfR to select an exit. It allows a group of exit links to be defined as a preferred set of links for PfR to use when optimizing TCs specified in a PfR policy.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.772.1.2.1.15
cpfrMapFallbackLinkGroupName This object specifies a fallback link group to be used if all the exits in the primary link group are out-of-policy (OOP).	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.772.1.2.1.16
cpfrMapLossType This object specifies the loss type configuration used by PfR. It specifies the relative percentage or maximum number of packets that PfR will permit to be lost during transmission on an exit link.	PfrMetricPolicyTyper/w Type Values: 1 relative 2 threshold	.1.3.6.1.4.1.9.9.772.1.2.1.17
cpfrMapLossRelativeAvg This object specifies a relative percentage of packet loss based on a comparison of short-term and long-term packet loss percentages. The value of this object is valid if the corresponding value of cpfrMapLossType is s…	tenths of percentUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.2.1.18
cpfrMapLossThresholdMax This object specifies absolute packet loss based on packets per million (PPM). The value of this object is valid if the corresponding value of cpfrMapLossType is set to 'threshold'.	packets-per-millionUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.2.1.19
cpfrMapModeMonitor This object specifies how a PfR MC using this PfR map should monitor the TCs. 'active' Enable active monitoring. 'activethrougput' Enable active monitoring with throughput data from …	Enumerationr/w Enumerated Values: 1 active 2 activeThroughput 3 both 4 fast 5 passive	.1.3.6.1.4.1.9.9.772.1.2.1.20
cpfrMapModeRouteOpts This object specifies how a PfR MC using this PfR map should control the TCs. 'control' Monitor and report performance data and use the data to make route changes that will optimize performance. …	Enumerationr/w Enumerated Values: 1 control 2 observe 3 metric	.1.3.6.1.4.1.9.9.772.1.2.1.21
cpfrMapRouteMetricBgpLocalPref This object specifies the BGP local preference for PfR controlled routes. The value of this object is valid if the corresponding value of cpfrMapModeRouteOpts is set to 'metric'. The value 0 is not a valid BGP local pr…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.2.1.22
cpfrMapRouteMetricEigrpTagCommunity This object specifies the community value to an EIGRP route under PfR control. The value of this object is valid if the corresponding value of cpfrMapModeRouteOpts is set to 'metric'. The value 0 is not a valid EIGRP …	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.2.1.23
cpfrMapRouteMetricStaticTag This object specifies the tag to a static route under PfR control. The value of this object is valid if the corresponding value of cpfrMapModeRouteOpts is set to 'metric'. The value 0 is not a valid Static tag. Confi…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.2.1.24
cpfrMapModeSelectExitType This object specifies how a PfR MC using this PfR map should select an exit based on performance or policy. 'best' Select the best exit based on performance or policy. 'good' Select t…	Enumerationr/w Enumerated Values: 1 best 2 good	.1.3.6.1.4.1.9.9.772.1.2.1.25
cpfrMapMOSThresholdMin This object specifies a threshold MOS value that represents a minimum voice quality for exit link utilization.	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.2.1.26
cpfrMapMOSPercentage This object specifies a percentage value that is compared with the percentage of MOS samples that are below the MOS threshold. The number of MOS samples over a period of time that are below the threshold MOS value are…	percentUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.2.1.27
cpfrMapNextHopAddressType This object specifies the address type of the address specified as the next hop when PfR is used for sinkhole filtering.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.772.1.2.1.28
cpfrMapNextHopAddress This object specifies the next hop address to which PfR forwards packets for matching prefixes. The prefixes that are forwarded to the next hop address are specified by an access list configured in a match clause on th…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.772.1.2.1.29
cpfrMapPeriodicTimer This object specifies the periodic timer that PfR uses to select the best exit for the matched TCs. When this timer expires, PfR automatically selects the best exit, irrespective of whether the current exit is in-polic…	secondsUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.2.1.30
cpfrMapActiveProbeFrequency This object specifies the frequency of active probes configured under a PfR map.	secondsUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.2.1.31
cpfrMapActiveProbePackets This object specifies the number of probe packets generated for each active probe cycle.	packetsUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.2.1.32
cpfrMapTracerouteReporting This object enables continuous and policy-based traceroute probing. Traceroute probing allows prefix performance to be measured on a hop-by-hop basis. Delay, loss, and reachability measurements are gathered for each h…	Bitsr/w Enumerated Values: 0 none 1 delay 2 loss 3 unreachable	.1.3.6.1.4.1.9.9.772.1.2.1.33
cpfrMapUnreachableType This object specifies the unreachable type configuration used by PfR. It is used to set the relative percentage or the absolute maximum number of unreachable hosts, based on flows per million (fpm), that PfR will per…	PfrMetricPolicyTyper/w Type Values: 1 relative 2 threshold	.1.3.6.1.4.1.9.9.772.1.2.1.34
cpfrMapUnreachableRelativeAvg This object specifies a relative percentage of unreachable hosts. The relative unreachable host percentage is based on a comparison of short-term and long-term measurements. The short-term measurement reflects the per…	tenths of percentSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.772.1.2.1.35
cpfrMapUnreachableThresholdMax This object specifies the absolute maximum number of unreachable hosts based on flows per million. The value of this object is valid if the corresponding value of cpfrMapUnreachableType is set to 'threshold'.	flows per millionUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.2.1.36
cpfrMapRoundRobinResolver This object specifies whether the round robin resolver is enabled or disabled. 'enable' Round robin resolver is enabled. 'disable' Round robin resolver is disabled.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.9.9.772.1.2.1.37
cpfrMapEventNotifCtrlType This object specifies the event notification control type configuration used by PfR. It is used to set the relative percentage or the absolute threshold value for cpfrMapEventNotifCtrlThreshold object.	PfrMetricPolicyTyper/w Type Values: 1 relative 2 threshold	.1.3.6.1.4.1.9.9.772.1.2.1.38
cpfrMapEventNotifCtrlThreshold This object specifies the absolute event counter threshold or relative percentage threshold used by PfR to throttle the generation of cpfrTCInpolicyThresholdBelowNotify and cpfrTCPrimaryThresholdBelowNotify. …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.772.1.2.1.39
cpfrMapEventTCCount This object specifies the current absolute number of traffic classes, whose state are 'default' or 'oopolicy' specified by cpfrTCStatus.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.772.1.2.1.40

This table lists the match clause instances created by the
system. 
          
This table has an expansion dependent relationship on
cpfrMapTable, containing zero or more rows for each
cpfrMapEntry.

cpfrMatchEntry row .1.3.6.1.4.1.9.9.772.1.3.1

An entry describing a match clause PfR uses.

A peer SNMP entity may create a match criterion by setting an
instance of cpfrMatchStatus to 'createAndWait' or 'createAndGo'.
Observe that an implementation th…

Indexes

cpfrMapIndex cpfrMapPolicyIndex

Column	Syntax	OID
cpfrMatchValid This object specifies which of those objects are valid. When a user is configuring a match clause, the corresponding bit should also be set to true in this object. The following list shows different types of match cla…	Bitsr/w Enumerated Values: 0 accessList 1 prefixList 2 learn 3 trafficClassACL 4 nbarApplicationList 5 trafficClassPfx	.1.3.6.1.4.1.9.9.772.1.3.1.1
cpfrMatchAddrAccessList This object specifies the access list used to manually configure a traffic class that matches destination prefixes in an access list used in a PfR map.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.772.1.3.1.2
cpfrMatchAddrPrefixList This object specifies the prefix list used to manually configure a traffic class that matches destination prefixes in a prefix list.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.772.1.3.1.3
cpfrMatchAddrPrefixInside This object specifies whether or not the prefixes learned by PfR are within the internal network.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.772.1.3.1.4
cpfrMatchLearnMode This object specifies the mode by which PfR should learn prefixes. 'Delay' PfR learns prefixes based on the highest delay. 'Inside' PfR learns the prefixes inside the network. …	Enumerationr/w Enumerated Values: 1 delay 2 inside 3 throughput 4 list	.1.3.6.1.4.1.9.9.772.1.3.1.5
cpfrMatchLearnListName This object specifies the learn list name used by PfR for learning prefixes. This object is valid when the corresponding cpfrMatchLearnMode object is set to 'list'.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.772.1.3.1.6
cpfrMatchTCNbarListName This object specifies that PfR is to profile traffic destined for prefixes defined in an IP prefix list that match one or more NBAR applications. The applications are predefined with a protocol identifier. This object…	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.772.1.3.1.7
cpfrMatchTCNbarApplPfxList This object specifies the prefix list to be used by PfR to filter traffic that is learned based on NBAR applications.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.772.1.3.1.8
cpfrMatchTCPfxInside This object specifies whether or not the prefixes filtered by the prefix list is inside the internal network.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.772.1.3.1.9

This table lists the resolver instances created by the
system.
          
This table has an expansion dependent relationship on
cpfrMapTable, containing zero or more rows for each
cpfrMapEntry.

cpfrResolveEntry row .1.3.6.1.4.1.9.9.772.1.4.1

An entry in the cpfrResolveTable describes a policy metric
and its priority relative to other metrics if multiple metrics
are configured for the default policy or under a PfR map.

A peer SNMP entity may cre…

Indexes

cpfrResolveIndex

Column	Syntax	OID
cpfrResolveIndex This object indicates an arbitrary integer-value that uniquely identifies a PfR resolver.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.772.1.4.1.1
cpfrResolveStorageType This object specifies the memory realization of the row. The following columnar objects are allowed to be writable when the storageType of this entry is permanent(4): cpfrResolvePolicyType, cpfrResolveVariance, c…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.772.1.4.1.2
cpfrResolveRowStatus This object specifies the status of a row in the resolver table. The following columnar objects must be valid in order to transition the row to the active state: cpfrMCResolvePriority, cpfrResolvePolicy…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.772.1.4.1.3
cpfrResolvePriority This object indicates the priority of the resolver.	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.4.1.4
cpfrResolvePolicyType This object indicates the type of this resolver policy.	PfrResolvePolicyTyper/w Type Values: 0 none 1 cost 2 delay 3 jitter 4 loss 5 mos 6 range 7 utilization	.1.3.6.1.4.1.9.9.772.1.4.1.5
cpfrResolveVariance This object specifies the allowable variance for the policy, as a percentage.	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.4.1.6
cpfrResolveMapIndex This object refers to the map Index of PfR map under which this resolver was configured.	PfrMapIndexOrZeror/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.772.1.4.1.7
cpfrResolveMapPolicyIndex This object refers to PfR map policy index of PfR map under which this resolver was configured.	PfrMapPolicyIndexr/w Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.9.9.772.1.4.1.8

This table lists the PfR learn instances created by the system.
          
This table has a one-to-one relationship with cpfrMCTable,
containing zero or more rows for each cpfrMCEntry.

cpfrLearnEntry row .1.3.6.1.4.1.9.9.772.1.5.1

An entry in the cpfrLearnTable describes the configuration
and status of a PfR learning policy.

A device creates a row in a cpfrLearnTable when PfR learn is
enabled. Likewise, such a device destroys a row …

Indexes

cpfrMCIndex

Column	Syntax	OID
cpfrLearnAggregationType This object specifies how a MC aggregates learned prefixes based on traffic type. 'bgp' The bgp keyword configures aggregation based on entries in the BGP routing table. 'nonBgp' T…	Enumerationr/w Enumerated Values: 1 bgp 2 nonBgp 3 prefixLength	.1.3.6.1.4.1.9.9.772.1.5.1.1
cpfrLearnAggregationPrefixLen This object configures aggregation based on the specified prefix length.	bitsUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.5.1.2
cpfrLearnMethod This object specifies the method by which PfR learns prefixes. 'delay' Learn prefixes with the highest round trip delay. 'throughput' Learn prefixes with the highest throughput. …	Bitsr/w Enumerated Values: 0 delay 1 throughput 2 insideBgp	.1.3.6.1.4.1.9.9.772.1.5.1.3
cpfrLearnExpireType This object specifies the length of time that the learned prefixes are kept in the central policy database. 'session' Configures a session-based expiration timer. 'time' Configures a…	Enumerationr/w Enumerated Values: 1 session 2 time	.1.3.6.1.4.1.9.9.772.1.5.1.4
cpfrLearnExpireSessionNum This object configures a session-based expiration timer. A number from 1 to 65535 can be entered. Each increment represents one monitoring period. The object is valid when cpfrLearnExpireType is configured with session.	monitoring periodsUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.5.1.5
cpfrLearnExpireTime This object configures a time-based expiration timer.	minutesUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.5.1.6
cpfrLearnMonitorPeriod This object specifies the time period over which a PfR MC learns traffic flows.	minutesUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.5.1.7
cpfrLearnPeriodInterval This object specifies the time interval between prefix monitoring periods.	minutesUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.5.1.8
cpfrLearnPrefixesNumber This object specifies the maximum number of prefixes PfR can learn.	prefixesUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.5.1.9
cpfrLearnAggAccesslistName This object specifies a PfR access list to define criteria which PfR uses to aggregate TCs.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.772.1.5.1.10
cpfrLearnFilterAccessListName This object specifies an access list used to filter TCs learned by PfR.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.772.1.5.1.11

This table lists the learn lists created by the system.
          
This table has an expansion dependent relationship on
cpfrLearnTable, containing zero or more rows for each
cpfrLearnEntry.

cpfrLearnListEntry row .1.3.6.1.4.1.9.9.772.1.6.1

An entry in the cpfrLearnListTable describes the configuration
and status of a PfR learn list.

A peer SNMP entity may create a learn list by setting an
instance of cpfrLearnListRowStatus to 'createAndWait' …

Indexes

cpfrMCIndex cpfrLearnListIndex

Column	Syntax	OID
cpfrLearnListIndex This object indicates an arbitrary integer-value that uniquely identifies a PfR learn list.	PfrLearnListIndex Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.9.9.772.1.6.1.1
cpfrLearnListStorageType This object specifies the memory realization of the row. The following columnar objects are allowed to be writable when the storageType of this entry is permanent(4): cpfrLearnListReferenceName, cpfrLearnListSequenceNu…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.772.1.6.1.2
cpfrLearnListRowStatus This object specifies the status of a row in the learn list table. The following columnar objects must be valid in order to transition the row to the active state: cpfrLearnListReferenceName, cpfrLearnListSequenceNum. …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.772.1.6.1.3
cpfrLearnListReferenceName This object specifies the reference name of a learn list.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.772.1.6.1.4
cpfrLearnListSequenceNum This object specifies the sequence number representing a sequence that is used to determine the order in which PfR applies learn list criteria.	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.6.1.5
cpfrLearnListMethod This object specifies how PfR learns prefixes. 'delay' Learn prefixes with the highest round trip delay. 'througput' Learn prefixes with the highest throughput. 'rsvp' …	Bitsr/w Enumerated Values: 0 delay 1 throughput 2 rsvp	.1.3.6.1.4.1.9.9.772.1.6.1.6
cpfrLearnListAclName This object specifies the name of the access list to be used by the PfR learn list.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.772.1.6.1.7
cpfrLearnListPfxName This object specifies the name of the prefix list to be used by the PfR learn list.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.772.1.6.1.8
cpfrLearnListPfxInside This object specifies whether PfR should learn prefixes that are inside the network.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.772.1.6.1.9
cpfrLearnListNbarAppl This object specifies a set of protocols in the cpfrNbarApplListTable that will be used by PfR to learn TCs.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.772.1.6.1.10
cpfrLearnListFilterPfxName This object specifies the name of the prefix list to be used as a filter for traffic classes to be learned by this learn list.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.772.1.6.1.11

This table lists the active probe instances created by the
system.
          
This table has an expansion dependent relationship on
cpfrMapTable, containing zero or more rows for each
cpfrMapEntry.

cpfrActiveProbeEntry row .1.3.6.1.4.1.9.9.772.1.7.1

An entry in the cpfrActiveProbeTable describes the
configuration and status that directs how PfR active-probes
targets.

A peer SNMP entity may create an active probe by setting an
instance of cpfrActivePro…

Indexes

cpfrActiveProbeIndex

Column	Syntax	OID
cpfrActiveProbeIndex This object indicates an arbitrary integer-value that uniquely identifies an active probe entity in a PfR policy map.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.772.1.7.1.1
cpfrActiveProbeStorageType This object specifies the memory realization of the row. The following columnar objects are allowed to be writable when the storageType of this entry is permanent(4): pfrActiveProbeType, cpfrActiveProbeTargetAddressTyp…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.772.1.7.1.2
cpfrActiveProbeRowStatus This object specifies the status of row in the active probe table. The following columnar objects must be valid in order to transition the row to the active state: cpfrActiveProbeType, cpfrActiveProbeTa…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.772.1.7.1.3
cpfrActiveProbeType This object specifies the Type of probe. 'echo' Use Internet Control Message Protocol (ICMP) echo messages (ping) for active probe. 'jitter' Use jitter messages for active probe. …	Enumerationr/w Enumerated Values: 1 echo 2 jitter 3 tcpConn 4 udpEcho	.1.3.6.1.4.1.9.9.772.1.7.1.4
cpfrActiveProbeTargetAddressType This object specifies the type of a target IP address of a prefix to be monitored using the specified type of probe.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.772.1.7.1.5
cpfrActiveProbeTargetAddress This object specifies target IP address of a prefix to be monitored using the specified type of probe.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.772.1.7.1.6
cpfrActiveProbeTargetPortNumber This object specifies the destination port number for the active probe.	CISCO-TCCiscoPortr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.9.772.1.7.1.7
cpfrActiveProbePfrMapIndex This object specifies the index of the PfR policy map on which the active probe clause is configured.	PfrMapIndexOrZeror/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.772.1.7.1.8
cpfrActiveProbeDscpValue This object indicates the Differentiated Services Code Point (DSCP) value.	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.7.1.9
cpfrActiveProbeCodecName This object specifies the codec value used for Mean Opinion Score (MOS) calculation and only used with the jitter probe type. The codec values must be one of the following, 'g711alaw' G.711 A Law 6400…	Enumerationr/w Enumerated Values: 1 g711alaw 2 g711ulaw 3 g729a	.1.3.6.1.4.1.9.9.772.1.7.1.10
cpfrActiveProbeMapIndex This object specifies the index of a PfR map under which this active probe was configured.	PfrMapIndexOrZeror/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.772.1.7.1.11
cpfrActiveProbeMapPolicyIndex This object specifies the index of a PfR map policy under which this active probe was configured.	PfrMapIndexOrZeror/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.772.1.7.1.12
cpfrActiveProbeAdminStatus This object specifies whether the probe is assigned to a prefix or not, or is a forced probe configured on a PfR map. 'assigned' Active probe is assigned. 'unassigned' Active probe is…	Enumerationr/w Enumerated Values: 1 assigned 2 unassigned 3 forced	.1.3.6.1.4.1.9.9.772.1.7.1.13
cpfrActiveProbeOperStatus This object indicates the current status of an active probe. 'running' Active probe is running. 'notrunning' Active probe is not running.	Enumeration Enumerated Values: 1 running 2 notRunning	.1.3.6.1.4.1.9.9.772.1.7.1.14
cpfrActiveProbeAssignedPfxAddressType This object indicates the type of assigned prefix address.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.772.1.7.1.15
cpfrActiveProbeAssignedPfxAddress This object indicates the assigned prefix address.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.772.1.7.1.16
cpfrActiveProbeAssignedPfxLen This object indicates the length of the assigned prefix address.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.7.1.17
cpfrActiveProbeMethod This object indicates how an active probe is entered into the PfR system. 'learned' Active probe is triggered when PfR learns TCs. 'configured' Active probe is forced by CLI command.	Enumeration Enumerated Values: 1 learned 2 configured	.1.3.6.1.4.1.9.9.772.1.7.1.18

This table lists the border router (BR) instances created by
the system.
          
This table has an expansion dependent relationship on the  
cpfrMCTable, containing zero or more rows for each cpfrMCEntry.

cpfrBREntry row .1.3.6.1.4.1.9.9.772.1.8.1

An entry in the cpfrBRTable describes the configuration and
status of one PfR BR.

A peer SNMP entity may create a BR by setting an instance of
cpfrBRRowStatus to 'createAndWait' or 'createAndGo'.
Observe t…

Indexes

cpfrMCIndex cpfrBRIndex

Column	Syntax	OID
cpfrBRIndex This object indicates an arbitrary integer-value that uniquely identifies a PfR BR.	PfrBorderRouterIndex Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.9.9.772.1.8.1.1
cpfrBRStorageType This object specifies the memory realization of the row. The following columnar objects are allowed to be writable when the storageType of this entry is permanent(4): cpfrBRAddressType, cpfrBRAddress, cpfrBRKeyName.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.772.1.8.1.2
cpfrBRRowStatus This object specifies the status of a row in the BR table. The following columnar objects must be valid in order to transition the row to the active state: None. The following columnar objects can be mo…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.772.1.8.1.3
cpfrBRAddressType This object specifies the IP address type of a PfR BR.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.772.1.8.1.4
cpfrBRAddress This object specifies the IP address of a PfR BR	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.772.1.8.1.5
cpfrBRKeyName This object specifies the key used to authenticate communication between the BR and the MC. The authentication key must be specified during the initial configuration to establish communication, but is not required to…	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.772.1.8.1.6
cpfrBROperStatus This object indicates the operational status of PfR BR. 'active' BR is active. 'inactive' BR is inactive.	Enumerationr/w Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.9.9.772.1.8.1.7
cpfrBRConnStatus This object indicates the connection status between BR and MC. 'up' BR is successfully connected to the MC. 'down' BR is not connected to the MC.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.9.9.772.1.8.1.8
cpfrBRUpTime This object indicates the length of time that the connection with the MC has been up.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.772.1.8.1.9
cpfrBRConnFailureReason This object indicates the reason why the connection status between the BR and MC fails. 'versionmismatch' The software version between MC and BR does not match. 'none' No failure reas…	Enumeration Enumerated Values: 1 versionMismatch 2 none 3 authFailure 4 socketError 5 timerExpired	.1.3.6.1.4.1.9.9.772.1.8.1.10
cpfrBRAuthFailCount This object indicates the number of authentication failures between the MC and the BR.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.772.1.8.1.11

This table lists the PfR exit instances created by the system.
          
This table has an expansion dependent relationship on the  
cpfrBRTable, containing zero or more rows for each
cpfrBREntry.

cpfrExitEntry row .1.3.6.1.4.1.9.9.772.1.9.1

An entry in the cpfrExitTable describes the configuration and
status of one PfR monitored/controlled exit.

A peer SNMP entity may create an exit for PfR BR by setting an
instance of cpfrLinkGroupRowStatus t…

Indexes

cpfrMCIndex cpfrBRIndex cpfrExitIndex

Column	Syntax	OID
cpfrExitIndex This object indicates an arbitrary integer-value that uniquely identifies a PfR monitored/controlled exit.	PfrExitIndex Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.9.9.772.1.9.1.1
cpfrExitStorageType This object specifies the memory realization of the row. The following columnar objects are allowed to be writable when the storageType of this entry is permanent(4): cpfrExitName, cpfrExitType, cpfrDowngradeBgpCommun…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.772.1.9.1.2
cpfrExitRowStatus This object specifies the status of a row in the exit table. The following columnar objects must be valid in order to transition the row to the active state: cpfrExitName, cpfrExitType. The following col…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.772.1.9.1.3
cpfrExitName This object specifies the name of a PfR controlled interface on a BR.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.772.1.9.1.4
cpfrExitType This object specifies the exit type. 'internal' The interface is an internal interface. Internal interfaces are used for communication between BRs. 'external' The interface is an external i…	Enumerationr/w Enumerated Values: 1 internal 2 external	.1.3.6.1.4.1.9.9.772.1.9.1.5
cpfrDowngradeBgpCommunity This object specifies a BGP prepend community number attached to an inside prefix BGP advertisement from the network to another autonomous system. The BGP prepend community will increase the number of autonomous system…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.9.1.6
cpfrExitMaxUtilRxType This object specifies the maximum utilization configuration type for incoming traffic over a single PfR exit.	PfrMetricPolicyTyper/w Type Values: 1 relative 2 threshold	.1.3.6.1.4.1.9.9.772.1.9.1.7
cpfrExitMaxUtilRxAbsolute This object specifies the maximum utilization on a PfR managed entrance link to an absolute value.	KbpsUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.9.1.8
cpfrExitMaxUtilRxPercentage This object specifies the maximum utilization on a PfR managed entrance link to a bandwidth percentage.	percentUnsigned32r/w Constraints: range: 1-100	.1.3.6.1.4.1.9.9.772.1.9.1.9
cpfrExitMaxUtilTxType This object specifies the maximum utilization configuration type for traffic over a single PfR managed exit.	PfrMetricPolicyTyper/w Type Values: 1 relative 2 threshold	.1.3.6.1.4.1.9.9.772.1.9.1.10
cpfrExitMaxUtilTxAbsolute This object indicates the maximum utilization on a PfR managed exit link to an absolute value.	KbpsUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.9.1.11
cpfrExitMaxUtilTxPercentage This object specifies the maximum utilization on a PfR managed exit link to a bandwidth percentage.	percentUnsigned32r/w Constraints: range: 1-100	.1.3.6.1.4.1.9.9.772.1.9.1.12
cpfrExitCostCalcMethod This object indicates how the fee for a particular exit is calculated. 'combined' Specifies billing based on combined egress and ingress rollup samples. 'separate' Specifies billin…	Enumerationr/w Enumerated Values: 1 combined 2 separate 3 sum	.1.3.6.1.4.1.9.9.772.1.9.1.13
cpfrExitCostDiscard This object specifies how often rollup samples are discarded. 'daily' Rollup samples are discarded every day. 'monthly' Rollup samples are discarded every month.	Enumerationr/w Enumerated Values: 1 daily 2 monthly	.1.3.6.1.4.1.9.9.772.1.9.1.14
cpfrExitCostDiscardType This object specifies the threshold value types for cost discard. 'absolute' Absolute value configured in cpfrExitCostDiscardAbsolute object will be used. 'percent' Percent value …	Enumerationr/w Enumerated Values: 1 absolute 2 percent	.1.3.6.1.4.1.9.9.772.1.9.1.15
cpfrExitCostDiscardAbsolute This object specifies an absolute number of rollup samples to be discarded.	samplesUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.9.1.16
cpfrExitCostDiscardPercent This object specifies what percentage of the rollup samples should be discarded when calculating the exit cost.	percentUnsigned32r/w Constraints: range: 1-99	.1.3.6.1.4.1.9.9.772.1.9.1.17
cpfrExitCostEndDayOfMonth This object specifies the end billing date.	Unsigned32r/w Constraints: range: 1-31	.1.3.6.1.4.1.9.9.772.1.9.1.18
cpfrExitCostEndOffsetType This object indicates the cpfrExitCostEndOffset is before or after cpfrExitCostEndDayOfMonth. 'positive' time After cpfrExitCostEndDayOfMonth. 'negative' time before cpfrExitCostEndDa…	Enumerationr/w Enumerated Values: 1 positive 2 negative	.1.3.6.1.4.1.9.9.772.1.9.1.19
cpfrExitCostEndOffset This object indicates an offset in hours and minutes, allowing you to compensate for time zone differences.	SNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.9.9.772.1.9.1.20
cpfrExitCostFixedFeeCost This object specifies a non-usage based fixed fee.	dollarsUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.9.1.21
cpfrExitCostNickName This object specifies a nickname for the cost structure.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.772.1.9.1.22
cpfrExitCostSamplingPeriod This object specifies the sampling period.	minutesUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.9.1.23
cpfrExitCostRollupPeriod This object specifies that samples are rolled up at the interval specified for the minutes argument. This value must be greater than or equal to the corresponding instance of cpfrExitCostSamplingPeriod.	minutesUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.9.1.24
cpfrExitCostSummerTimeStart This object indicates the date and time when the daylight savings time starts.	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.9.9.772.1.9.1.25
cpfrExitCostSummerTimeOffset This object specifies the offset added in the spring and subtracted in the fall.	minutesUnsigned32r/w Constraints: range: 1-120	.1.3.6.1.4.1.9.9.772.1.9.1.26
cpfrExitCostSummerTimeEnd This object indicates the date and time when daylight saving time comes to an end.	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.9.9.772.1.9.1.27
cpfrExitCapacity This object indicates the capacity of the interface.	KbpsHCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.9.9.772.1.9.1.28
cpfrExitRxBandwidth This object indicates the receive bandwidth as configured on the interface.	KbpsHCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.9.9.772.1.9.1.29
cpfrExitTxBandwidth This object indicates the transmit bandwidth as configured on the interface.	KbpsHCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.9.9.772.1.9.1.30
cpfrExitTxLoad This object indicates the transmit load of the exit.	percentUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.9.1.31
cpfrExitRxLoad This object indicates the receive traffic load of the exit.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.9.1.32
cpfrExitNickName The object indicates the exit nickname assigned to an external PfR interface.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.772.1.9.1.33
cpfrExitCost1 This object indicates the exit link cost for the current month.	dollarsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.9.1.34
cpfrExitSustainedUtil1 This object indicates the sustained utilization of the exit link in the current month.	KbpsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.9.1.35
cpfrExitCost2 This object indicates the exit link cost of the previous month.	dollarsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.9.1.36
cpfrExitSustainedUtil2 This object indicates the sustained utilization of the exit link for the month prior to the previous month.	KbpsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.9.1.37
cpfrExitCost3 This object indicates the exit link cost for the month prior to the previous month.	dollarsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.9.1.38
cpfrExitSustainedUtil3 This object indicates the sustained utilization of the exit link the month prior to the previous month.	KbpsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.9.1.39
cpfrExitRollupTotal This object indicates the total rollups.	minutesUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.9.1.40
cpfrExitRollupDiscard This object indicates the total discarded rollups.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.9.1.41
cpfrExitRollupLeft This object indicates the left over rollups.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.9.1.42
cpfrExitRollupCollected This object indicates the rollups that are being collected.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.9.1.43
cpfrExitRollupMomTgtUtil This object indicates the momentary utilization of the targets.	KbpsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.9.1.44
cpfrExitRollupStartingTgtUtil This object indicates the target when the rollup starts.	KbpsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.9.1.45
cpfrExitRollupCurrentTgtUtil This object indicates current rollup target.	kbpsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.9.1.46
cpfrExitRollupCumRxBytes This object indicates the cumulative receive bytes in a rollup.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.772.1.9.1.47
cpfrExitRollupCumTxBytes This object indicates the cumulative transmit bytes in a rollup.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.772.1.9.1.48
cpfrExitRollupTimeRemain This object indicates the remaining time before a new rollup is started.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.9.9.772.1.9.1.49
cpfrExitOperStatus This object indicates the current status of an exit. 'up' The exit is up. 'down' The exit is down.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.9.9.772.1.9.1.50
cpfrExitRsvpBandwidthPool This object indicates the bandwidth pool for RSVP in PfR.	bytesHCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.9.9.772.1.9.1.51

This table lists the cost tier instances created by the
system.
          
This table has an expansion dependent relationship on the  
cpfrExitTable, containing zero or more rows for each
cpfrExitEntry.

cpfrExitCostTierEntry row .1.3.6.1.4.1.9.9.772.1.10.1

An entry describing the configuration of a cost tier of a PfR
monitored or Controlled exit.

A peer SNMP entity may create a cost tier for a PfR monitored
or controlled exit by setting an instance of
cpfrExi…

Indexes

cpfrMCIndex cpfrBRIndex cpfrExitIndex cpfrExitCostTierIndex

Column	Syntax	OID
cpfrExitCostTierIndex This object indicates an arbitrary integer-value that uniquely identifies the cost tier of a PfR monitored/controlled exit.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.10.1.1
cpfrExitCostTierStorageType This object specifies the memory realization of the row. The following columnar objects are allowed to be writable when the storageType of this entry is permanent(4): cpfrExitCostTierFee.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.772.1.10.1.2
cpfrExitCostTierRowStatus This object specifies the status of a row in the exit cost tier table. The following columnar objects must be valid in order to transition the row to the active state: cpfrExitCostTierFee. The followin…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.772.1.10.1.3
cpfrExitCostTierFee This object specifies the cost value of a cost tier.	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.10.1.4

This table lists the TC instances created by the system.

cpfrTrafficClassEntry row .1.3.6.1.4.1.9.9.772.1.11.1

An entry describing the metrics that identify a PfR monitored
or controlled TC.

A device supporting PfR creates a row in a
cpfrTrafficClassTable when it recognizes the addition of a new
TC monitored by PfR.…

Indexes

cpfrMCIndex cpfrTrafficClassIndex

Column	Syntax	OID
cpfrTrafficClassIndex This object indicates an arbitrary integer-value that uniquely identifies a TC monitored/controlled by PfR.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.772.1.11.1.1
cpfrTCBRIndex This object indicates the index of the BR on which PfR is controlling the TC.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.772.1.11.1.2
cpfrTCBRExitIndex This object indicates the index of the exit on which PfR is controlling the TC.	PfrExitIndex Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.9.9.772.1.11.1.3
cpfrTCMapIndex This object indicates the map index of the PfR map defining the policy for the TC.	PfrMapIndexOrZero Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.772.1.11.1.4
cpfrTCMapPolicyIndex This object indicates the map policy index of the PfR map defining the policy for the TC.	PfrMapPolicyIndex Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.9.9.772.1.11.1.5
cpfrTrafficClassValid This object indicates which objects in the traffic class table are valid. If an attribute of a TC is configured, the corresponding bit in this object should be set. 'source' Source address is valid. …	Bits Enumerated Values: 0 source 1 destination 2 sourcePort 3 destinationPort 4 dscp 5 protocol 6 nbar	.1.3.6.1.4.1.9.9.772.1.11.1.6
cpfrTCSrcPrefixType This object indicates the type of IP address indicated by the corresponding instance of cpfrTCSrcPrefix.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.772.1.11.1.7
cpfrTCSrcPrefix This object indicates the source IP prefix of the corresponding TC.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.772.1.11.1.8
cpfrTCSrcPrefixLen This object indicates the prefix length of source IP address for the TC.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.11.1.9
cpfrTCSrcMinPort This object indicates the minimum source port number for a TC.	CISCO-TCCiscoPort Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.9.772.1.11.1.10
cpfrTCSrcMaxPort This object indicates the maximum source port number for a TC	CISCO-TCCiscoPort Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.9.772.1.11.1.11
cpfrTCDstPrefixType This object indicates the type of IP address indicated by the corresponding instances of cpfrTCDstPrefix.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.772.1.11.1.12
cpfrTCDstPrefix This object indicates the destination IP prefix of the corresponding TC.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.772.1.11.1.13
cpfrTCDstPrefixLen This object indicates the prefix length of destination IP address for the TC.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.11.1.14
cpfrTCDstMinPort This object indicates the minimum destination port of a TC.	CISCO-TCCiscoPort Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.9.772.1.11.1.15
cpfrTCDstMaxPort This object indicates the maximum destination port of a TC	CISCO-TCCiscoPort Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.9.772.1.11.1.16
cpfrTCDscpValue This object indicates the Differentiated Services Code Point (DSCP) value of a TC.	Integer32 Constraints: range: -1-63	.1.3.6.1.4.1.9.9.772.1.11.1.17
cpfrTCProtocol This object indicates the routing protocol by a TC.	bgpEnumeration Enumerated Values: 1 static 2 eigrp 3 ribpbr 4 bgp 5 pbr 6 cce 7 unknown	.1.3.6.1.4.1.9.9.772.1.11.1.18
cpfrTCNbarApplication This object indicates the application or protocol recognized by NBAR. The value of this object points to an entry in cnpdSupportedProtocolsTable, which describes the recognized protocol, and is defined in CISCO-NBAR-PRO…	CISCO-NBAR-PROTOCOL-DISCOVERY-MIBCiscoPdProtocolIndex	.1.3.6.1.4.1.9.9.772.1.11.1.19

This table lists the TC status instances created by the
system.  
          
This table has an one-to-one relationship with
cpfrTrafficClassTable,  containing a row for each entry in
cpfrTrafficClassTable.

cpfrTrafficClassStatusEntry row .1.3.6.1.4.1.9.9.772.1.12.1

An entry describing the status of a PfR monitored or controlled
TC.

A device supporting PfR creates a row in a
cpfrTrafficClassStatusTable when it recognizes the addition of
a new TC. Likewise, such a devi…

Indexes

cpfrMCIndex cpfrTrafficClassIndex

Column	Syntax	OID
cpfrTCStatus This object indicates the current state of a TC. 'default' The state means that the parent IP routes control the exit for this destination prefix. This would be the same behavior as if PfR were not config…	Enumeration Enumerated Values: 1 default 2 choose 3 holddown 4 inpolicy 5 oopolicy	.1.3.6.1.4.1.9.9.772.1.12.1.1
cpfrTCSType This object indicates whether a TC was learned or configured. 'learned' The TC is learned by PfR. 'configured' The TC is configured via CLI command.	Enumeration Enumerated Values: 1 learned 2 configured	.1.3.6.1.4.1.9.9.772.1.12.1.2
cpfrTCSLearnListIndex This object indicates the index of the learn list responsible for PfR learning this TC.	PfrLearnListIndexOrZero Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.772.1.12.1.3
cpfrTCSTimeOnCurrExit This object indicates the length of time the TC has been controlled on the current exit.	secondsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.12.1.4
cpfrTCSControlState The object indicates the control state of a TC. 'controlled' PfR is controlling this TC. 'uncontrolled' PfR is not controlling this TC.	Enumeration Enumerated Values: 1 controlled 2 uncontrolled	.1.3.6.1.4.1.9.9.772.1.12.1.5
cpfrTCSControlBy This object indicates which routing protocol a TC is being controlled by. 'static' TC is controlled by static routing protocol. 'eigrp' TC is controlled by EIGRP. 'ribp…	Enumeration Enumerated Values: 1 static 2 eigrp 3 ribpbr 4 bgp 5 pbr 6 cce 7 unknown	.1.3.6.1.4.1.9.9.772.1.12.1.6
cpfrTCSTimeRemainCurrState This object indicates the time remaining before the prefix timer expires.	secondsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.12.1.7
cpfrTCSLastOOPEventTime This object indicates the time when the last out-of-policy event was observed.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.772.1.12.1.8
cpfrTCSLastOOPReason This object indicates the last out-of-policy reason. This object indicates the reason that causes an out-of-policy event. 'delayOOPassiveMode' The Delay is out of policy in passive mode. …	Enumeration Enumerated Values: 1 delayOOPPassiveMode 2 lossOOPPassiveMode 3 unreachableOOPPassiveMode 4 delayOOPActiveMode 5 lossOOPActiveMode 6 unreachableOOPActiveMode 7 jitterOOPActiveMode 8 mosOOPActiveMode 9 none 10 rsvpOOPRecomputeExclude	.1.3.6.1.4.1.9.9.772.1.12.1.9
cpfrTCSLastRouteChangeEvent This object indicates the value of sysUpTime when the last route change occurred for this TC.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.772.1.12.1.10
cpfrTCSLastRouteChangeReason This object indicates the reason the last route change occurred.	PfrLastUncontrolReason Type Values: 1 none 2 activatingUnsedFcdTgt 3 ifaceDown 4 newProbeTargetAssigned 5 newTargetAssigned 6 borderDown 7 uncontrolNonOptimizedPfx 8 recontrolNull0Pfx 9 recontrolSinkHolePfx 10 modeRouteChange 11 pfxEnabled 12 uncontrolModeMonitorChange 13 insideEnabled 14 forcedNextHop 15 forwardToNull0 16 clearOnePfx 17 clearOneTc 18 grantUpdated 19 tcInFastMode 20 pbrBRTopologyChange 21 pfrReqNotMet 22 probeFrequencyChange 23 fcdTgtAssRemMod 24 policyChangedAddedNewFcdProbeTgt 25 usingFcdTgtNow 26 firstTargetWithDscpAdded 27 usingLmNow 28 lastTargetWithDscpRemoved 29 couldntMonitor 30 couldntControl 31 applControlOnBrFailed 32 allProtoCouldNtControl 33 excludePfxFailed 34 ipflowRestFailed 35 couldntExclude 36 dontDowngradeAllEntrances 37 maxDownGrade 38 cantSelectEntrances 39 unhandledOopReasonInChooseExit 40 oopModeSelectExitGood 41 couldntFindBestExitInAllLinkGrps 42 couldntFindBestExit 43 failedToControlRoute 44 endOfProbing 45 retryForcedNextHop 46 noStatusInPfxTimeout 47 couldntChooseExitInPfxTimeout 48 inconsistentView 49 unableToSendControlMsg 50 nbarIdStateUpdated 51 controledExitIsNotCurrent 52 exitMisMatch 53 newExitWhileInpolicy 54 unknownExit 55 controlledExitIsNotCurrForUpd 56 couldntControlPasPfxInSpecMode 57 remoteStatsNotFound 58 nbarInternalIfAddedRemoved 59 noPassiveData 60 probeNumPktsChanged 61 last	.1.3.6.1.4.1.9.9.772.1.12.1.11

This table lists the TC's metrics instances created by the
system.  
          
This table has an one-to-one relationship with
cpfrTrafficClassTable,  containing a row for each entry in
cpfrTrafficClassTable.

cpfrTrafficClassMetricEntry row .1.3.6.1.4.1.9.9.772.1.13.1

An entry describing the metric for a PfR monitored or
controlled TC.

A device supporting PfR creates a row in a
cpfrTrafficClassMetricTable when it recognizes the addition of
a new TC. Likewise, such a dev…

Indexes

cpfrMCIndex cpfrTrafficClassIndex

Column	Syntax	OID
cpfrTCMLastUpdateTime This object indicates the value of sysUpTime when the metrics were last updated.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.772.1.13.1.1
cpfrTCMAge This object indicates the age of a metric.	secondsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.13.1.2
cpfrTCMetricsValid This object indicates if an object in the entry is valid. 'relativeDelay' Relative delay is a valid value. 'relativeJitter' Relative jitter is a valid value. 'relativeD…	Bits Enumerated Values: 0 activeSTJitterAvg 1 mosPercentage 2 attempts 3 packets 4 passiveSTUnreachableAvg 5 passiveSTdelayAvg 6 passiveSTLossAvg 7 activeSTUnreachableAvg 8 activeSTDelayAvg 9 passiveLTUnreachableAvg 10 passiveLTDelayAvg 11 passiveLTLossAvg 12 activeLTUnreachableAvg 13 activeLTDelayAvg	.1.3.6.1.4.1.9.9.772.1.13.1.3
cpfrTCMActiveSTJitterAvg This object indicates average jitter of a TC in active mode.	percentUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.13.1.4
cpfrTCMMOSPercentage This object indicates the number of Mean Opinion Score (MOS) packets with a percentage below threshold in active mode.	percentUnsigned32 Constraints: range: 0-100	.1.3.6.1.4.1.9.9.772.1.13.1.5
cpfrTCMAttempts This object indicates the number of attempts to send an active probe to a target for this TC.	attemptsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.13.1.6
cpfrTCMPackets This object indicates the number packets per jitter probe.	Packets/probeUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.13.1.7
cpfrTCMPassiveSTUnreachableAvg This object indicates the number of the average short term unreachable targets in passive mode.	flows-per-millionUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.13.1.8
cpfrTCMPassiveSTDelayAvg This object indicates the short term delay as measured by Netflow. The short term interval is 5 minutes.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.13.1.9
cpfrTCMPassiveSTLossAvg This object indicates the number of short term packets lost in passive mode.	packetsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.13.1.10
cpfrTCMActiveSTUnreachableAvg This object indicates the number of short term unreachable packets in active mode.	flows-per-millionUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.13.1.11
cpfrTCMActiveSTDelayAvg This object indicates the short term delay in milliseconds in active mode.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.13.1.12
cpfrTCMPassiveLTUnreachableAvg This object indicates the number of long term unreachable packets in flows-per-million in passive mode.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.13.1.13
cpfrTCMPassiveLTDelayAvg This object indicates the long term delay in milliseconds in passive mode.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.13.1.14
cpfrTCMPassiveLTLossAvg This object indicates the number of packets lost over the long term in packets-per-million in passive mode.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.13.1.15
cpfrTCMActiveLTUnreachableAvg This object indicates the number of long term unreachable packets in flows-per-million in active mode.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.13.1.16
cpfrTCMActiveLTDelayAvg This object indicates the long term delay in milliseconds in active mode.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.772.1.13.1.17

This table lists the link group instances created by the
system. 
          
It has an expansion dependent relationship on cpfrExitTable, 
containing zero or more rows for each cpfrExitEntry.

cpfrLinkGroupExitEntry row .1.3.6.1.4.1.9.9.772.1.14.1

An entry describing a link group configured for a PfR monitored
or controlled external exit.

A peer SNMP entity may create a link group for a PfR monitored
or controlled exit by setting an instance of
cpfrL…

Indexes

cpfrMCIndex cpfrLinkGroupName cpfrLinkGroupIndex

Column	Syntax	OID
cpfrLinkGroupName This object indicates the name of a link-group.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.9.9.772.1.14.1.1
cpfrLinkGroupIndex This object indicates a unique arbitrary number identifying a specific instance in a link-group with the identical name.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.772.1.14.1.2
cpfrLinkGroupStorageType This object specifies the memory realization of the row. The following columnar objects are allowed to be writable when the storageType of this entry is permanent(4): cpfrLinkGroupBRIndex, cpfrLinkGroupExitIndex.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.772.1.14.1.3
cpfrLinkGroupRowStatus This object specifies the status of a NBAR application list. The following columnar objects must be valid in order to transition the row to the active state: None. The following columnar objects can be m…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.772.1.14.1.4
cpfrLinkGroupBRIndex This object specifies the PfR BR on which the exit related to this link group is configured.	PfrBorderRouterIndexr/w Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.9.9.772.1.14.1.5
cpfrLinkGroupExitIndex This object specifies the exit, identified by this index, in combination with cpfrLinkGroupBRIndex, in cpfrExitTable.	PfrExitIndexr/w Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.9.9.772.1.14.1.6
cpfrLinkGroupType This object indicates PfR Link-Group type. 'primaryLinkGroup' primary link-group 'fallbackLinkGroup' fallback link-group 'none' There is no link-group.	Enumeration Enumerated Values: 1 primaryLinkGroup 2 fallbackLinkGroup 3 none	.1.3.6.1.4.1.9.9.772.1.14.1.7

This table lists the NBAR list instances created by the
system.  
          
This table has an expansion dependent relationship on
cpfrMatchTable and cpfrLearnListTable, containing zero or more
rows for each cpfrMatchEntry and cpfrLearnListEntry.

cpfrNbarApplListEntry row .1.3.6.1.4.1.9.9.772.1.15.1

An entry describing a NBAR application configured in PfR.

A peer SNMP entity may create an NBAR application entry by
setting an instance of cpfrNbarApplListRowStatus to
'createAndWait' or
'createAndGo'. Ob…

Indexes

cpfrNbarApplListName cpfrNbarApplIndex

Column	Syntax	OID
cpfrNbarApplListName This object indicates the name of a NBAR application list.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.9.9.772.1.15.1.1
cpfrNbarApplIndex This object indicates a unique arbitrary number identifying a specific protocol in a PfR NBAR Application List.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.772.1.15.1.2
cpfrNbarApplListStorageType This object specifies the memory realization of the row. The following columnar objects are allowed to be writable when the storageType of this conceptual row is permanent(4): cpfrNbarApplPdIndex.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.772.1.15.1.3
cpfrNbarApplListRowStatus This object specifies the status of a NBAR application list. The following columnar objects must be valid in order to transition the row to the active state: None. The following columnar objects can be m…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.772.1.15.1.4
cpfrNbarApplPdIndex This object indicates the application or protocol recognized by NBAR. The value of this object points to an entry in cnpdSupportedProtocolsTable, which describes the recognized protocol and is defined in CISCO-NBAR-…	CISCO-NBAR-PROTOCOL-DISCOVERY-MIBCiscoPdProtocolIndexr/w	.1.3.6.1.4.1.9.9.772.1.15.1.5