CISCO-OSCP-MIB
The MIB module for managing the Cisco Optical
Supervisory Channel Protocol (OSCP). The OSCP is used
to determine and maintain wavelength connectivity with
remote nodes. OSCP includes support for bundles of
wavelengths to a common remote node, including dynamic
selection of the message channel on one wavelength to
carry control and management traffic for the entire
wavelength bundle.
- Source file
CISCO-OSCP-MIB- Last revised
- Identity
ciscoOscpMIB- Base OID
1.3.6.1.4.1.9.9.202
Imported Objects
| CISCO-SMI | ciscoMgmt |
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Gauge32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION (no object page) TruthValue |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-OSCP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-OSCP-MIB::ciscoOscpMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-OSCP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-OSCP-MIB::ciscoOscpMIB'
Objects (40)
Showing 40 of 40 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.9.9.202 |
||
.1.3.6.1.4.1.9.9.202.1 |
||
.1.3.6.1.4.1.9.9.202.1.1 |
||
.1.3.6.1.4.1.9.9.202.1.1.1 |
||
.1.3.6.1.4.1.9.9.202.1.1.2 |
||
|
|
.1.3.6.1.4.1.9.9.202.1.1.3 |
|
|
Enumeration
|
.1.3.6.1.4.1.9.9.202.1.1.4 |
|
|
millisecondsUnsigned32
|
.1.3.6.1.4.1.9.9.202.1.1.5 |
|
|
millisecondsUnsigned32
|
.1.3.6.1.4.1.9.9.202.1.1.6 |
|
|
Unsigned32
|
.1.3.6.1.4.1.9.9.202.1.1.7 |
|
.1.3.6.1.4.1.9.9.202.1.1.8 |
||
.1.3.6.1.4.1.9.9.202.1.2 |
||
.1.3.6.1.4.1.9.9.202.1.2.1 |
||
.1.3.6.1.4.1.9.9.202.1.2.1.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.9.9.202.1.2.1.10 |
|
.1.3.6.1.4.1.9.9.202.1.2.1.11 |
||
.1.3.6.1.4.1.9.9.202.1.2.1.12 |
||
.1.3.6.1.4.1.9.9.202.1.2.1.13 |
||
.1.3.6.1.4.1.9.9.202.1.2.1.14 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.202.1.2.1.2 |
|
.1.3.6.1.4.1.9.9.202.1.2.1.3 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.202.1.2.1.4 |
|
.1.3.6.1.4.1.9.9.202.1.2.1.5 |
||
.1.3.6.1.4.1.9.9.202.1.2.1.6 |
||
.1.3.6.1.4.1.9.9.202.1.2.1.7 |
||
.1.3.6.1.4.1.9.9.202.1.2.1.8 |
||
.1.3.6.1.4.1.9.9.202.1.2.1.9 |
||
.1.3.6.1.4.1.9.9.202.1.3 |
||
.1.3.6.1.4.1.9.9.202.1.3.1 |
||
.1.3.6.1.4.1.9.9.202.1.3.1.1 |
||
.1.3.6.1.4.1.9.9.202.1.3.1.2 |
||
.1.3.6.1.4.1.9.9.202.1.3.1.3 |
||
.1.3.6.1.4.1.9.9.202.1.3.1.4 |
||
.1.3.6.1.4.1.9.9.202.1.3.1.5 |
||
.1.3.6.1.4.1.9.9.202.1.3.1.6 |
||
.1.3.6.1.4.1.9.9.202.2 |
||
.1.3.6.1.4.1.9.9.202.2.0 |
||
.1.3.6.1.4.1.9.9.202.3 |
||
.1.3.6.1.4.1.9.9.202.3.1 |
||
.1.3.6.1.4.1.9.9.202.3.2 |
Dependencies (7) 5 direct · 2 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CISCO-SMIcisco
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- CISCO-OSCP-MIBciscoselected
Type Definitions (4)
| Unsigned32 |
range: 0..255 |
|
| Unsigned32 | ||
| OctetString |
range: 6 |
|
| Enumeration |
unknown(1)version1(2) |
Conformance Groups (3)
|
coscpHighestVersion coscpLowestVersion coscpSwitchId coscpHelloHoldDown coscpHelloInterval coscpHelloInactivityFactor coscpNotifiesEnabled coscpLinkType coscpLinkVersion coscpLinkHelloState coscpLinkRemoteSwitchId coscpLinkRemotePortId coscpLinkIfIndex coscpLinkInHellos coscpLinkInDiscardedHellos coscpLinkOutHellos coscpLinkTransDown
A collection of cisco specific MIB objects used for
management of OSCP. |
.1.3.6.1.4.1.9.9.202.3.2.1
|
|
|
coscpPriorityChangeMode coscpLinkDerivedBundleId coscpLinkConfigBundleId coscpLinkSelPriority coscpBundleActivePortId coscpBundleIfIndex coscpBundlePortCount coscpBundleRowStatus
A collection of cisco specific MIB objects used for
management of wavelength bundles to a common remote node that are controlled by OSCP. |
.1.3.6.1.4.1.9.9.202.3.2.2
|
|
|
A collection of cisco specific notifications used for
management of OSCP. |
.1.3.6.1.4.1.9.9.202.3.2.3
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.9.9.202.3.1.1The compliance statement for entities which implement the
Cisco OSCP MIB.
Cisco OSCP MIB.
Required groups
| mandatory | ciscoOscpBasicGroup | |
| mandatory | ciscoOscpNotificationsGroup | |
| optional | ciscoOscpBundleGroup |
Required for implementations that support bundles of wavelengths to a common remote node, including dynamic selection of the message channel on one wavelength to carry control and management traffic for the entire wavelength bundle. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| coscpSwitchId | readonly | Write access is not required. | |
| coscpPriorityChangeMode | readonly | Write access and support of the 'delayed' codepoint are not required. |
Notifications / Traps (1)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.9.9.202.2.0.1 |
A coscpNotifyTransDown notification is sent when the
value of an instance of coscpTransDown increments. This indicates that a link exited the 'twoWay' state and cannot be used to carry control and management traffic for an optical supervisory channel. |