CISCO-OPTICAL-OTS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
218

cooOtsControllerTable

table
.1.3.6.1.4.1.9.9.834.1.1.2 · 1 row entry · 48 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cooOtsControllerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-OPTICAL-OTS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-OPTICAL-OTS-MIB::cooOtsControllerTable' 
This table provides management information for OTS optical layer
related attributes of interfaces with an ifType of
opticalTransport(196).
cooOtsControllerEntry row .1.3.6.1.4.1.9.9.834.1.1.2.1
An entry containing management information on OTS optical layer
related attributes of interfaces with an ifType
opticalTrasnport(196). Entries are created by the feature when a
new interface is added to the ifTable.
Indexes
Column Syntax OID
cooOtsControllerPortType
This object represents the port type of the optical OTS interface.
CiscoOpticalOtsPortType
Type Values:
1line
2com
3osc
4comCheck
5working
6protected
7addDrop
Description:
This value indicates the port type for optical OTS
interface.
Valid values are -
line(1) : port facing the fiber and far-end section.
com(2) : port facing the near-end section.
osc(3) : port for…
 .1.3.6.1.4.1.9.9.834.1.1.2.1.1
cooOtsControllerLaserStatus
This object represents the current operational state of the
laser.
CiscoOpticalOtsLaserStatus
Type Values:
1unknown
2on
3off
4apr
Description:
This value indicates the module laser status.
Valid values are -

unknown(1) : unknown status
on(2) : laser on
off(3) : laser off
apr(4) : Denotes Automatic Power Reduction (APR)
 .1.3.6.1.4.1.9.9.834.1.1.2.1.2
cooOtsControllerRXPower
This object represents the receive power in
1/100 dBm on optical OTS interfaces.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.2.1.3
cooOtsControllerTXPower
This object represents the transmit power in
1/100 dBm on optical OTS interfaces.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.2.1.4
cooOtsControllerAmpliGain
This object represents the amplifier gain value in
1/100 dB on optical OTS interfaces.
1/100 dBCiscoOpticalOtsGainInDbr/w
Type Constraints:
range: -100..4000
Description:
OTS ports associated to amplifier device,this value represent
the amplifier gain setting.
An integer value that represents the gain level in
1/100ths of dB.
A negative value represents not meaninful value in case the
am…
 .1.3.6.1.4.1.9.9.834.1.1.2.1.5
cooOtsControllerAmpliTilt
This object represents the amplifier tilt value in
1/100 dB on optical OTS interfaces.
1/100 dBCiscoOpticalOtsTiltInDbr/w
Type Constraints:
range: -500..500
Description:
OTS ports associated to amplifier device, this values represent
the tilt parameter.
An integer value that represents the tilt level in 1/100ths of
dB.
Example:
The value 300 represents a tilt level of 3.0 dB.
 .1.3.6.1.4.1.9.9.834.1.1.2.1.6
cooOtsControllerTotalRXPower
This object is used to represents the total receive power in
1/100 dBm on optical OTS interfaces.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.2.1.7
cooOtsControllerTotalTXPower
This object is used to represents the total transmit power
in 1/100 dBm on optical OTS interfaces.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.2.1.8
cooOtsControllerRXVoaAttenuation
This object represents the receive VOA attenuation value
in 1/100 dB on optical OTS interfaces.
1/100 dBCiscoOpticalOtsVoaAttenInDbr/w
Description:
An unsigned integer value that represents the VOA attenuation
level in 1/100ths of dB.
Example: The value 200 represents an attenuation
level of 2.0 dB.
 .1.3.6.1.4.1.9.9.834.1.1.2.1.9
cooOtsControllerTXVoaAttenuation
This object represents the transmit VOA attenuation value
in 1/100 dB on optical OTS interfaces.
1/100 dBCiscoOpticalOtsVoaAttenInDbr/w
Description:
An unsigned integer value that represents the VOA attenuation
level in 1/100ths of dB.
Example: The value 200 represents an attenuation
level of 2.0 dB.
 .1.3.6.1.4.1.9.9.834.1.1.2.1.10
cooOtsControllerRXLowThreshold
This object is used to configure the receive low threshold in
1/100 dBm on optical OTS interfaces.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPowerr/w
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.2.1.11
cooOtsControllerTXLowThreshold
This object is used to configure the transmit low threshold in
1/100 dBm on optical OTS interfaces.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPowerr/w
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.2.1.12
cooOtsControllerAmpliChannelPwr
This object is used to configure the amplifier channel power in
1/100 dBm on optical OTS interfaces.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPowerr/w
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.2.1.13
cooOtsControllerChannelPwrMaxDelta
This object is used to configure the maximum delta on channel
power in 1/100 dBm on optical OTS interfaces.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPowerr/w
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.2.1.14
cooOtsControllerAmpliControlMode
This object is used to configure the amplifier control mode.
CiscoOpticalOtsAmpliControlModer/w
Type Values:
1manual
2auto
3power
Description:
OTS ports associated to amplifier device, this value indicates
how the amplifier is controlled.
Valid values are -
manual(1) : manual control mode (An external entity has to
provide gain/tilt settings)
auto(2) : autom…
 .1.3.6.1.4.1.9.9.834.1.1.2.1.15
cooOtsControllerAmpliGainRange
This object is used to configure the amplifier gain range.
CiscoOpticalOtsAmpliGainRanger/w
Type Values:
1normal
2extended
Description:
OTS ports associated to amplifier device, this value indicates
the working ranges available for amplifier gain.
Valid values are -

normal(1) : normal gain range
extended(2) : extended gain range
 .1.3.6.1.4.1.9.9.834.1.1.2.1.16
cooOtsControllerAmpliSafetyCtrlMode
This object is used to configure the safety control mode.
CiscoOpticalOtsAmpliSafetyCtrlModer/w
Type Values:
1auto
2disabled
Description:
OTS ports associated to amplifier device, this value indicates
how the safety compliaces regulation are statisfied.
Valid values are -

auto(1) : automatic safety control mode
disabled(2) : disabled safety…
 .1.3.6.1.4.1.9.9.834.1.1.2.1.17
cooOtsControllerOsri
This object is used to configure the OSRI.
CiscoOpticalOtsOsrir/w
Type Values:
1on
2off
Description:
OTS ports associated to amplifier device, this value indicates
the optical safety remote interlock (OSRI) status.
Valid values are -

on(1) : force laser shutdown for safety interlock
off(2) : normal operation
 .1.3.6.1.4.1.9.9.834.1.1.2.1.18
cooOtsControllerProtectionPortRole
This object represents the port role on
optical channel interfaces.
CiscoOpticalOtsProtectionPortRole
Type Values:
1active
2standby
Description:
This value indicates the actual OTS port role in case a
protection device is in place.
Valid values are -

active(1) : active port
standby(2) : standby port
 .1.3.6.1.4.1.9.9.834.1.1.2.1.19
cooOtsControllerState
This object represents the controller status of
optical OTS interfaces.
CiscoOpticalOtsState
Type Values:
1up
2down
3adminDown
Description:
This value indicates the controller status.
Valid values are -

up(1) : controller operstatus up
down(2) : controller operstatus down
adminDown(3) : controller administratively down
 .1.3.6.1.4.1.9.9.834.1.1.2.1.20
cooOtsControllerTranspAdminState
This object represents the transport administration status on
optical OTS interfaces.
CiscoOpticalOtsTranspAdminState
Type Values:
1inService
2outOfService
3maintenance
4ains
Description:
This value indicates the transport administrative status.
Valid values are -

inService(1) : transport administrative status in-service
outOfService(2) : transport administrative status out-of-service
maint…
 .1.3.6.1.4.1.9.9.834.1.1.2.1.21
cooOtsControllerAlarmState
This object indicates the current alarms status of the Optics
layer.
Alarms description :
noDefect : No alarms
highRXPwr : Input optical power reading over the
fail-high threshold
highTXPwr…
Bits
Enumerated Values:
0noDefect
1highRXPwr
2highTXPwr
3lowRXPwr
4lowTXPwr
5lospRXPwr
6locRXPwr
7degLowGain
8degHighGain
9alsAmp
10aprAmp
11noEqAutoAmp
12misAutoAmp
13switchToProtect
14autoAmpliCtrlRunning
 .1.3.6.1.4.1.9.9.834.1.1.2.1.22
cooOtsControllerRXSpanLoss
This object is used to represents the span loss power in 1/100
dB on optical OTS interfaces
1/100 dBCISCO-OPTICAL-MIBCoiOpticalPower
Constraints:
range: -4000-3000
 .1.3.6.1.4.1.9.9.834.1.1.2.1.23
cooOtsControllerTXSpanLoss
This object is used to represents the span loss power in 1/100
dB on optical OTS interfaces
1/100 dBCISCO-OPTICAL-MIBCoiOpticalPower
Constraints:
range: -4000-3000
 .1.3.6.1.4.1.9.9.834.1.1.2.1.24
cooOtsControllerRXEnabled
This object represents the RX direction status of optical OTS
interfaces.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.834.1.1.2.1.25
cooOtsControllerTXEnabled
This object represents the TX direction status of optical OTS
interfaces.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.834.1.1.2.1.26
cooOtsControllerIAmpliGain
This object represents the amplifier gain value in
1/10 dB on optical OTS interfaces for ingress direction.
1/10 dBCiscoOpticalOtsIEGainInDb
Type Constraints:
range: 80..400
Description:
OTS ports associated to amplifier device,this value represent
the amplifier gain setting for Ingress and Egress Amplifiers.
An integer value that represents the gain level in
1/10ths of dB.
A negative value indicates th…
 .1.3.6.1.4.1.9.9.834.1.1.2.1.27
cooOtsControllerIAmpliTilt
This object represents the amplifier tilt value in
1/10 dB on optical OTS interfaces for ingress direction.
1/10 dBCiscoOpticalOtsIETiltInDb
Type Constraints:
range: -50..50
Description:
This value represents the tilt parameter for an OTS port
associated to the amplifier device.
An integer value that represents the tilt level in 1/10ths of
dB.
Example:
The value 30 represents a tilt level of 3.0 dB.
 .1.3.6.1.4.1.9.9.834.1.1.2.1.28
cooOtsControllerIAmpliGainRange
This object is used to configure Ingress amplifier gain range.
CiscoOpticalOtsAmpliGainRange
Type Values:
1normal
2extended
Description:
OTS ports associated to amplifier device, this value indicates
the working ranges available for amplifier gain.
Valid values are -

normal(1) : normal gain range
extended(2) : extended gain range
 .1.3.6.1.4.1.9.9.834.1.1.2.1.29
cooOtsControllerISafetyControlMode
This object is used to configure Ingress safety control mode.
CiscoOpticalOtsAmpliSafetyCtrlMode
Type Values:
1auto
2disabled
Description:
OTS ports associated to amplifier device, this value indicates
how the safety compliaces regulation are statisfied.
Valid values are -

auto(1) : automatic safety control mode
disabled(2) : disabled safety…
 .1.3.6.1.4.1.9.9.834.1.1.2.1.30
cooOtsControllerIAmpliOsri
This object is used to configure Ingress OSRI.
CiscoOpticalOtsOsri
Type Values:
1on
2off
Description:
OTS ports associated to amplifier device, this value indicates
the optical safety remote interlock (OSRI) status.
Valid values are -

on(1) : force laser shutdown for safety interlock
off(2) : normal operation
 .1.3.6.1.4.1.9.9.834.1.1.2.1.31
cooOtsControllerEAmpliGain
This object represents the amplifier gain value in
1/10 dB on optical OTS interfaces for Egress direction.
1/10 dBCiscoOpticalOtsIEGainInDbr/w
Type Constraints:
range: 80..400
Description:
OTS ports associated to amplifier device,this value represent
the amplifier gain setting for Ingress and Egress Amplifiers.
An integer value that represents the gain level in
1/10ths of dB.
A negative value indicates th…
 .1.3.6.1.4.1.9.9.834.1.1.2.1.32
cooOtsControllerEAmpliTilt
This object represents the amplifier tilt value in
1/10 dB on optical OTS interfaces for egress direction.
1/10 dBCiscoOpticalOtsIETiltInDb
Type Constraints:
range: -50..50
Description:
This value represents the tilt parameter for an OTS port
associated to the amplifier device.
An integer value that represents the tilt level in 1/10ths of
dB.
Example:
The value 30 represents a tilt level of 3.0 dB.
 .1.3.6.1.4.1.9.9.834.1.1.2.1.33
cooOtsControllerEAmpliGainRange
This object is used to configure the Egress amplifier gain range.
CiscoOpticalOtsAmpliGainRange
Type Values:
1normal
2extended
Description:
OTS ports associated to amplifier device, this value indicates
the working ranges available for amplifier gain.
Valid values are -

normal(1) : normal gain range
extended(2) : extended gain range
 .1.3.6.1.4.1.9.9.834.1.1.2.1.34
cooOtsControllerESafetyControlMode
This object is used to configure Egress safety control mode.
CiscoOpticalOtsAmpliSafetyCtrlModer/w
Type Values:
1auto
2disabled
Description:
OTS ports associated to amplifier device, this value indicates
how the safety compliaces regulation are statisfied.
Valid values are -

auto(1) : automatic safety control mode
disabled(2) : disabled safety…
 .1.3.6.1.4.1.9.9.834.1.1.2.1.35
cooOtsControllerEAmpliOsri
This object is used to configure Egress OSRI.
CiscoOpticalOtsOsrir/w
Type Values:
1on
2off
Description:
OTS ports associated to amplifier device, this value indicates
the optical safety remote interlock (OSRI) status.
Valid values are -

on(1) : force laser shutdown for safety interlock
off(2) : normal operation
 .1.3.6.1.4.1.9.9.834.1.1.2.1.36
cooOtsControllerTotLCTXPower
This object represents the transmit power(C+L) in
1/100 dBm on optical OTS interfaces.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.2.1.37
cooOtsControllerTotLCRXPower
This object represents the receive power(C+L) in
1/100 dBm on optical OTS interfaces.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.2.1.38
cooOtsControllerIForceApr
This object represents Force Automatic Power Reduction
for OTS interfaces.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.9.9.834.1.1.2.1.39
cooOtsControllerEForceApr
This object represents Force Automatic Power Reduction
for OTS interfaces.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.9.9.834.1.1.2.1.40
cooOtsControllerBrPower
This object represents the BR power in
1/100 dBm on optical OTS interfaces.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.2.1.41
cooOtsControllerLedState
This object represents LED state for OTS
interfaces.
Enumeration
Enumerated Values:
0off
1greenOn
2greenFlashing
3yellowOn
4yellowFlashing
5redOn
6redFlashing
7na
 .1.3.6.1.4.1.9.9.834.1.1.2.1.42
cooOtsControllerEAmpliBrRatio
This object represents EgressAmpliBrRatio for OTS
interfaces.
CiscoOpticalOtsBrRatioInDb
Type Constraints:
range: -5000..0
Description:
An integer value that represents BR Ratio
in dB.
Example: The value -4500 represents a BR Ratio
of -45.00 dB.
 .1.3.6.1.4.1.9.9.834.1.1.2.1.43
cooOtsControllerAmpliControlModeConfigVal
This object represents the Configured Amplifier Control Mode Value for OTS
interfaces.
CiscoOpticalOtsAmpliControlModer/w
Type Values:
1manual
2auto
3power
Description:
OTS ports associated to amplifier device, this value indicates
how the amplifier is controlled.
Valid values are -
manual(1) : manual control mode (An external entity has to
provide gain/tilt settings)
auto(2) : autom…
 .1.3.6.1.4.1.9.9.834.1.1.2.1.44
cooOtsControllerEAmpliPowerConfigVal
This object represents the Configured Egress Amplifier Power Value in
1/100 dBm on optical OTS interfaces.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPowerr/w
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.2.1.45
cooOtsControllerTemperature
This object represents the Controller Temperature in
1/100 C on optical OTS interfaces.
1/100 CCiscoOpticalOtsTemperature
Type Constraints:
range: -5000..10000
Description:
An integer value that represents Temperature
in Celsius for OTS controllers.
Example: The value 4500 represents a Temperature
45.00 C.
 .1.3.6.1.4.1.9.9.834.1.1.2.1.46
cooOtsControllerVoltage
This object represents the Controller Temperature in
1/100 V on optical OTS interfaces.
1/100 VCiscoOpticalOtsVoltage
Type Constraints:
range: -5000..10000
Description:
An integer value that represents Voltage
for OTS controller.
Example: The value 350 represents a Voltage
3.50 V.
 .1.3.6.1.4.1.9.9.834.1.1.2.1.47
cooOtsControllerEAmpliBrPower
This object represents EgressAmpliBrPower for OTS
interfaces.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.2.1.48

cooOtsOchControllerTable

table
.1.3.6.1.4.1.9.9.834.1.1.3 · 1 row entry · 13 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cooOtsOchControllerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-OPTICAL-OTS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-OPTICAL-OTS-MIB::cooOtsOchControllerTable' 
This table provides management information for OTS-OCH optical layer
related attributes of interfaces with an ifType of
opticalTransport(196).
cooOtsOchControllerEntry row .1.3.6.1.4.1.9.9.834.1.1.3.1
An entry containing management information on OTS-OCH optical layer
related attributes of interfaces with an ifType
opticalTransport(196). Entries are created by the feature when a
new interface is added to the ifTable.
Indexes
Column Syntax OID
cooOtsOchControllerPortType
This object represents the port type of the optical OTS-OCH interface.
CiscoOpticalOtsPortType
Type Values:
1line
2com
3osc
4comCheck
5working
6protected
7addDrop
Description:
This value indicates the port type for optical OTS
interface.
Valid values are -
line(1) : port facing the fiber and far-end section.
com(2) : port facing the near-end section.
osc(3) : port for…
 .1.3.6.1.4.1.9.9.834.1.1.3.1.1
cooOtsOchControllerLaserStatus
This object represents the current operational state of the
laser.
CiscoOpticalOtsLaserStatus
Type Values:
1unknown
2on
3off
4apr
Description:
This value indicates the module laser status.
Valid values are -

unknown(1) : unknown status
on(2) : laser on
off(3) : laser off
apr(4) : Denotes Automatic Power Reduction (APR)
 .1.3.6.1.4.1.9.9.834.1.1.3.1.2
cooOtsOchControllerRXPower
This object represents the receive power in
1/100 dBm on optical OTS-OCH interfaces.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.3.1.3
cooOtsOchControllerTXPower
This object represents the transmit power in
1/100 dBm on optical OTS-OCH interfaces.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.3.1.4
cooOtsOchControllerRXLowThreshold
This object is used to configure the receive low threshold in
1/100 dBm on optical OTS-OCH interfaces.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPowerr/w
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.3.1.5
cooOtsOchControllerTXLowThreshold
This object is used to configure the transmit low threshold in
1/100 dBm on optical OTS-OCH interfaces.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPowerr/w
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.3.1.6
cooOtsOchControllerWavelength
This object represents the wavelength on
optical OTS-OCH interfaces (unit 1/100 nm).
1/100 nmCISCO-OPTICAL-MIBCoiOpticalWavelength
Type Constraints:
range: 0
range: 1528770..1604030
 .1.3.6.1.4.1.9.9.834.1.1.3.1.7
cooOtsOchControllerFrequency
This object represents the frequency on
optical Ots-Och channel interfaces (unit 100 MHz).
100 MHzUnsigned32
Constraints:
range: 1913500-1961000
 .1.3.6.1.4.1.9.9.834.1.1.3.1.8
cooOtsOchControllerChannelNumber
This object represents the channel number on
optical OTS-OCH interfaces.
Unsigned32
Constraints:
range: 1-384
 .1.3.6.1.4.1.9.9.834.1.1.3.1.9
cooOtsOchControllerState
This object represents the controller status of
optical OTS-OCH interfaces.
CiscoOpticalOtsState
Type Values:
1up
2down
3adminDown
Description:
This value indicates the controller status.
Valid values are -

up(1) : controller operstatus up
down(2) : controller operstatus down
adminDown(3) : controller administratively down
 .1.3.6.1.4.1.9.9.834.1.1.3.1.10
cooOtsOchControllerTranspAdminState
This object represents the transport administration status on
optical OTS-OCH interfaces.
CiscoOpticalOtsTranspAdminState
Type Values:
1inService
2outOfService
3maintenance
4ains
Description:
This value indicates the transport administrative status.
Valid values are -

inService(1) : transport administrative status in-service
outOfService(2) : transport administrative status out-of-service
maint…
 .1.3.6.1.4.1.9.9.834.1.1.3.1.11
cooOtsOchControllerAlarmState
This object indicates the current alarms status of the Optics
layer.
Alarms description :
noDefect : No alarms
highRXPwr : Input optical power reading over the
fail-high threshold
highTXPwr…
Bits
Enumerated Values:
0noDefect
1highRXPwr
2highTXPwr
3lowRXPwr
4lowTXPwr
5lospRXPwr
6locRXPwr
7degLowGain
8degHighGain
9alsAmp
10aprAmp
11noEqAutoAmp
12misAutoAmp
13switchToProtect
 .1.3.6.1.4.1.9.9.834.1.1.3.1.12
cooOtsOchControllerWidth
This object represents the frequency on
optical Ots-Och channel interfaces (unit 1/10 GHz).
1/10 GHzUnsigned32
Constraints:
range: 500-8000
 .1.3.6.1.4.1.9.9.834.1.1.3.1.13

cooOtsRamanTable

table
.1.3.6.1.4.1.9.9.834.1.1.5 · 1 row entry · 16 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cooOtsRamanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-OPTICAL-OTS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-OPTICAL-OTS-MIB::cooOtsRamanTable' 
This table provides raman information for optical layer
related attributes of interfaces with an ifType of
opticalTransport(196).
cooOtsRamanEntry row .1.3.6.1.4.1.9.9.834.1.1.5.1
An entry containing raman information on optical layer
related attributes of interfaces with an ifType
opticalTransport(196). Entries are created by the feature
when a new interface is added to the ifTable.
Indexes
Column Syntax OID
cooOtsRaman1TXPower
This object represents the Power of
Raman Pump Instance 1 for OTS interfaces
(unit 1/100 mW).
1/100 mWCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.5.1.1
cooOtsRaman2TXPower
This object represents the Power of
Raman Pump Instance 2 for OTS interfaces
(unit 1/100 mW).
1/100 mWCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.5.1.2
cooOtsRaman3TXPower
This object represents the Power of
Raman Pump Instance 3 for OTS interfaces
(unit 1/100 mW).
1/100 mWCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.5.1.3
cooOtsRaman4TXPower
This object represents the Power of
Raman Pump Instance 4 for OTS interfaces
(unit 1/100 mW).
1/100 mWCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.5.1.4
cooOtsRaman5TXPower
This object represents the Power of
Raman Pump Instance 5 for OTS interfaces
(unit 1/100 mW).
1/100 mWCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.5.1.5
cooOtsRaman1Wavelength
This object represents the wavelength of
Raman Pump Instance 1 for OTS interfaces
(unit 1/100 nm).
1/100 nmCISCO-OPTICAL-MIBCoiOpticalWavelength
Type Constraints:
range: 0
range: 1528770..1604030
 .1.3.6.1.4.1.9.9.834.1.1.5.1.6
cooOtsRaman2Wavelength
This object represents the wavelength of
Raman Pump Instance 2 for OTS interfaces
(unit 1/100 nm).
1/100 nmCISCO-OPTICAL-MIBCoiOpticalWavelength
Type Constraints:
range: 0
range: 1528770..1604030
 .1.3.6.1.4.1.9.9.834.1.1.5.1.7
cooOtsRaman3Wavelength
This object represents the wavelength of
Raman Pump Instance 3 for OTS interfaces
(unit 1/100 nm).
1/100 nmCISCO-OPTICAL-MIBCoiOpticalWavelength
Type Constraints:
range: 0
range: 1528770..1604030
 .1.3.6.1.4.1.9.9.834.1.1.5.1.8
cooOtsRaman4Wavelength
This object represents the wavelength of
Raman Pump Instance 4 for OTS interfaces
(unit 1/100 nm).
1/100 nmCISCO-OPTICAL-MIBCoiOpticalWavelength
Type Constraints:
range: 0
range: 1528770..1604030
 .1.3.6.1.4.1.9.9.834.1.1.5.1.9
cooOtsRaman5Wavelength
This object represnts the wavelength of
Raman Pump Instance 5 for OTS interfaces
(unit 1/100 nm).
1/100 nmCISCO-OPTICAL-MIBCoiOpticalWavelength
Type Constraints:
range: 0
range: 1528770..1604030
 .1.3.6.1.4.1.9.9.834.1.1.5.1.10
cooOtsRamanCompositePower
This object represents the Composite Power
of Raman Pump for OTS interfaces (unit 1/100 mW).
1/100 mWCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.5.1.11
cooOtsRamanOsri
This object represents the Raman Osri
for OTS interfaces.
CiscoOpticalOtsOsri
Type Values:
1on
2off
Description:
OTS ports associated to amplifier device, this value indicates
the optical safety remote interlock (OSRI) status.
Valid values are -

on(1) : force laser shutdown for safety interlock
off(2) : normal operation
 .1.3.6.1.4.1.9.9.834.1.1.5.1.12
cooOtsRamanSafetyControlMode
This object represent the Raman Safety Control
Mode for OTS interfaces.
CiscoOpticalOtsAmpliSafetyCtrlMode
Type Values:
1auto
2disabled
Description:
OTS ports associated to amplifier device, this value indicates
how the safety compliaces regulation are statisfied.
Valid values are -

auto(1) : automatic safety control mode
disabled(2) : disabled safety…
 .1.3.6.1.4.1.9.9.834.1.1.5.1.13
cooOtsRamanForceAPR
This object represents the Raman Force APR
for OTS interfaces.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.9.9.834.1.1.5.1.14
cooOtsRamanBRPower
This object represents the Raman Br Power
for OTS interfaces.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.5.1.15
cooOtsRamanBRRatio
This object represents the Raman BR Ratio
for OTS interfaces.
1/100 dBCiscoOpticalOtsBrRatioInDb
Type Constraints:
range: -5000..0
Description:
An integer value that represents BR Ratio
in dB.
Example: The value -4500 represents a BR Ratio
of -45.00 dB.
 .1.3.6.1.4.1.9.9.834.1.1.5.1.16

cooOtsControllerTransceiverTable

table
.1.3.6.1.4.1.9.9.834.1.1.6 · 1 row entry · 1 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cooOtsControllerTransceiverTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-OPTICAL-OTS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-OPTICAL-OTS-MIB::cooOtsControllerTransceiverTable' 
This table provides ots transceiver detail for optical layer
related attributes of interfaces with an ifType of
opticalTransport(196).
cooOtsControllerTransceiverEntry row .1.3.6.1.4.1.9.9.834.1.1.6.1
An entry containing ots transceiver detail on optical layer
related attributes of interfaces with an ifType
opticalTransport(196). Entries are created by the feature
when a new interface is added to the ifTable.
Indexes
Column Syntax OID
cooOtsControllerTransceiverVendorInfo
This object represents the Controller Vendor Information
on optical OTS interfaces.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.9.9.834.1.1.6.1.1

cooOtsController2Table

table
.1.3.6.1.4.1.9.9.834.1.1.7 · 1 row entry · 48 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cooOtsController2Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-OPTICAL-OTS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-OPTICAL-OTS-MIB::cooOtsController2Table' 
This table provides management information for OTS optical layer
related attributes of interfaces with an ifType of
opticalTransport(196).
          
DESIGN RATIONALE:
This table supersedes the earlier cooOtsControllerTable which used
only ifIndex as the INDEX. The previous design could not distinguish
between LINE and COM port attributes on the same physical interface
(e.g., different TX power, gain settings per port). The composite
INDEX structure { ifIndex, cooOtsController2PortType } was introduced
to support multi-port OLS modules where LINE and COM ports share an
ifIndex but require independent operational data.
cooOtsController2Entry row .1.3.6.1.4.1.9.9.834.1.1.7.1
An entry containing management information on OTS optical layer
related attributes of interfaces with an ifType
opticalTransport(196). Entries are created by the feature when a
new interface is added to the ifTable.
Indexes
Column Syntax OID
cooOtsController2PortType
This object represents the port type of the optical OTS interface.
CiscoOpticalOtsPortType
Type Values:
1line
2com
3osc
4comCheck
5working
6protected
7addDrop
Description:
This value indicates the port type for optical OTS
interface.
Valid values are -
line(1) : port facing the fiber and far-end section.
com(2) : port facing the near-end section.
osc(3) : port for…
 .1.3.6.1.4.1.9.9.834.1.1.7.1.1
cooOtsController2LaserStatus
This object represents the current operational state of the
laser.
CiscoOpticalOtsLaserStatus
Type Values:
1unknown
2on
3off
4apr
Description:
This value indicates the module laser status.
Valid values are -

unknown(1) : unknown status
on(2) : laser on
off(3) : laser off
apr(4) : Denotes Automatic Power Reduction (APR)
 .1.3.6.1.4.1.9.9.834.1.1.7.1.2
cooOtsController2RXPower
This object represents the receive power in
1/100 dBm on optical OTS interfaces.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.7.1.3
cooOtsController2TXPower
This object represents the transmit power in
1/100 dBm on optical OTS interfaces.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.7.1.4
cooOtsController2AmpliGain
This object represents the amplifier gain value in
1/100 dB on optical OTS interfaces.
1/100 dBCiscoOpticalOtsGainInDbr/w
Type Constraints:
range: -100..4000
Description:
OTS ports associated to amplifier device,this value represent
the amplifier gain setting.
An integer value that represents the gain level in
1/100ths of dB.
A negative value represents not meaninful value in case the
am…
 .1.3.6.1.4.1.9.9.834.1.1.7.1.5
cooOtsController2AmpliTilt
This object represents the amplifier tilt value in
1/100 dB on optical OTS interfaces.
1/100 dBCiscoOpticalOtsTiltInDbr/w
Type Constraints:
range: -500..500
Description:
OTS ports associated to amplifier device, this values represent
the tilt parameter.
An integer value that represents the tilt level in 1/100ths of
dB.
Example:
The value 300 represents a tilt level of 3.0 dB.
 .1.3.6.1.4.1.9.9.834.1.1.7.1.6
cooOtsController2TotalRXPower
This object is used to represents the total receive power in
1/100 dBm on optical OTS interfaces.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.7.1.7
cooOtsController2TotalTXPower
This object is used to represents the total transmit power
in 1/100 dBm on optical OTS interfaces.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.7.1.8
cooOtsController2RXVoaAttenuation
This object represents the receive VOA attenuation value
in 1/100 dB on optical OTS interfaces.
1/100 dBCiscoOpticalOtsVoaAttenInDbr/w
Description:
An unsigned integer value that represents the VOA attenuation
level in 1/100ths of dB.
Example: The value 200 represents an attenuation
level of 2.0 dB.
 .1.3.6.1.4.1.9.9.834.1.1.7.1.9
cooOtsController2TXVoaAttenuation
This object represents the transmit VOA attenuation value
in 1/100 dB on optical OTS interfaces.
1/100 dBCiscoOpticalOtsVoaAttenInDbr/w
Description:
An unsigned integer value that represents the VOA attenuation
level in 1/100ths of dB.
Example: The value 200 represents an attenuation
level of 2.0 dB.
 .1.3.6.1.4.1.9.9.834.1.1.7.1.10
cooOtsController2RXLowThreshold
This object is used to configure the receive low threshold in
1/100 dBm on optical OTS interfaces.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPowerr/w
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.7.1.11
cooOtsController2TXLowThreshold
This object is used to configure the transmit low threshold in
1/100 dBm on optical OTS interfaces.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPowerr/w
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.7.1.12
cooOtsController2AmpliChannelPwr
This object is used to configure the amplifier channel power in
1/100 dBm on optical OTS interfaces.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPowerr/w
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.7.1.13
cooOtsController2ChannelPwrMaxDelta
This object is used to configure the maximum delta on channel
power in 1/100 dBm on optical OTS interfaces.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPowerr/w
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.7.1.14
cooOtsController2AmpliControlMode
This object represents the amplifier control mode.
CiscoOpticalOtsAmpliControlMode
Type Values:
1manual
2auto
3power
Description:
OTS ports associated to amplifier device, this value indicates
how the amplifier is controlled.
Valid values are -
manual(1) : manual control mode (An external entity has to
provide gain/tilt settings)
auto(2) : autom…
 .1.3.6.1.4.1.9.9.834.1.1.7.1.15
cooOtsController2AmpliGainRange
This object is used to configure the amplifier gain range.
CiscoOpticalOtsAmpliGainRanger/w
Type Values:
1normal
2extended
Description:
OTS ports associated to amplifier device, this value indicates
the working ranges available for amplifier gain.
Valid values are -

normal(1) : normal gain range
extended(2) : extended gain range
 .1.3.6.1.4.1.9.9.834.1.1.7.1.16
cooOtsController2AmpliSafetyCtrlMode
This object is used to configure the safety control mode.
CiscoOpticalOtsAmpliSafetyCtrlModer/w
Type Values:
1auto
2disabled
Description:
OTS ports associated to amplifier device, this value indicates
how the safety compliaces regulation are statisfied.
Valid values are -

auto(1) : automatic safety control mode
disabled(2) : disabled safety…
 .1.3.6.1.4.1.9.9.834.1.1.7.1.17
cooOtsController2Osri
This object is used to configure the OSRI.
CiscoOpticalOtsOsrir/w
Type Values:
1on
2off
Description:
OTS ports associated to amplifier device, this value indicates
the optical safety remote interlock (OSRI) status.
Valid values are -

on(1) : force laser shutdown for safety interlock
off(2) : normal operation
 .1.3.6.1.4.1.9.9.834.1.1.7.1.18
cooOtsController2ProtectionPortRole
This object represents the port role on
optical channel interfaces.
CiscoOpticalOtsProtectionPortRole
Type Values:
1active
2standby
Description:
This value indicates the actual OTS port role in case a
protection device is in place.
Valid values are -

active(1) : active port
standby(2) : standby port
 .1.3.6.1.4.1.9.9.834.1.1.7.1.19
cooOtsController2State
This object represents the controller status of
optical OTS interfaces.
CiscoOpticalOtsAdminState
Type Values:
1up
2down
Description:
This value indicates the controller status.
Valid values are -

up(1) : controller admin up
down(2) : controller admin down
 .1.3.6.1.4.1.9.9.834.1.1.7.1.20
cooOtsController2TranspAdminState
This object represents the transport administration status on
optical OTS interfaces.
CiscoOpticalOtsTranspAdminState
Type Values:
1inService
2outOfService
3maintenance
4ains
Description:
This value indicates the transport administrative status.
Valid values are -

inService(1) : transport administrative status in-service
outOfService(2) : transport administrative status out-of-service
maint…
 .1.3.6.1.4.1.9.9.834.1.1.7.1.21
cooOtsController2AlarmState
This object indicates the current alarms status of the Optics
layer.
Alarms description :
noDefect : No alarms
highRXPwr : Input optical power reading over the
fail-high threshold
highTXPwr…
Bits
Enumerated Values:
0noDefect
1highRXPwr
2highTXPwr
3lowRXPwr
4lowTXPwr
5lospRXPwr
6locRXPwr
7degLowGain
8degHighGain
9alsAmp
10aprAmp
11noEqAutoAmp
12misAutoAmp
13switchToProtect
14autoAmpliCtrlRunning
 .1.3.6.1.4.1.9.9.834.1.1.7.1.22
cooOtsController2RXSpanLoss
This object is used to represents the span loss power in 1/100
dB on optical OTS interfaces
1/100 dBCISCO-OPTICAL-MIBCoiOpticalPower
Constraints:
range: -4000-3000
 .1.3.6.1.4.1.9.9.834.1.1.7.1.23
cooOtsController2TXSpanLoss
This object is used to represents the span loss power in 1/100
dB on optical OTS interfaces
1/100 dBCISCO-OPTICAL-MIBCoiOpticalPower
Constraints:
range: -4000-3000
 .1.3.6.1.4.1.9.9.834.1.1.7.1.24
cooOtsController2RXEnabled
This object represents the RX direction status of optical OTS
interfaces.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.834.1.1.7.1.25
cooOtsController2TXEnabled
This object represents the TX direction status of optical OTS
interfaces.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.834.1.1.7.1.26
cooOtsController2IAmpliGain
This object represents the amplifier gain value in
1/10 dB on optical OTS interfaces for ingress direction.
1/10 dBCiscoOpticalOts2IEGainInDb
Type Constraints:
range: 0
range: 30..400
Description:
OTS ports associated with an amplifier device. This value
represents the amplifier both Ingress and Egress gain setting.
The gain is expressed in 1/10ths of a dB.

A value of 0 indicates that the amplifier is …
 .1.3.6.1.4.1.9.9.834.1.1.7.1.27
cooOtsController2IAmpliTilt
This object represents the amplifier tilt value in
1/10 dB on optical OTS interfaces for ingress direction.
1/10 dBCiscoOpticalOtsIETiltInDb
Type Constraints:
range: -50..50
Description:
This value represents the tilt parameter for an OTS port
associated to the amplifier device.
An integer value that represents the tilt level in 1/10ths of
dB.
Example:
The value 30 represents a tilt level of 3.0 dB.
 .1.3.6.1.4.1.9.9.834.1.1.7.1.28
cooOtsController2IAmpliGainRange
This object represents the Ingress amplifier gain range.
CiscoOpticalOtsAmpliGainRange
Type Values:
1normal
2extended
Description:
OTS ports associated to amplifier device, this value indicates
the working ranges available for amplifier gain.
Valid values are -

normal(1) : normal gain range
extended(2) : extended gain range
 .1.3.6.1.4.1.9.9.834.1.1.7.1.29
cooOtsController2ISafetyControlMode
This object represents the Ingress safety control mode.
CiscoOpticalOtsAmpliSafetyCtrlMode
Type Values:
1auto
2disabled
Description:
OTS ports associated to amplifier device, this value indicates
how the safety compliaces regulation are statisfied.
Valid values are -

auto(1) : automatic safety control mode
disabled(2) : disabled safety…
 .1.3.6.1.4.1.9.9.834.1.1.7.1.30
cooOtsController2IAmpliOsri
This object represents the Ingress OSRI.
CiscoOpticalOtsOsri
Type Values:
1on
2off
Description:
OTS ports associated to amplifier device, this value indicates
the optical safety remote interlock (OSRI) status.
Valid values are -

on(1) : force laser shutdown for safety interlock
off(2) : normal operation
 .1.3.6.1.4.1.9.9.834.1.1.7.1.31
cooOtsController2EAmpliGain
This object represents the amplifier gain value in
1/10 dB on optical OTS interfaces for Egress direction.
1/10 dBCiscoOpticalOts2IEGainInDbr/w
Type Constraints:
range: 0
range: 30..400
Description:
OTS ports associated with an amplifier device. This value
represents the amplifier both Ingress and Egress gain setting.
The gain is expressed in 1/10ths of a dB.

A value of 0 indicates that the amplifier is …
 .1.3.6.1.4.1.9.9.834.1.1.7.1.32
cooOtsController2EAmpliTilt
This object represents the amplifier tilt value in
1/10 dB on optical OTS interfaces for egress direction.
1/10 dBCiscoOpticalOtsIETiltInDb
Type Constraints:
range: -50..50
Description:
This value represents the tilt parameter for an OTS port
associated to the amplifier device.
An integer value that represents the tilt level in 1/10ths of
dB.
Example:
The value 30 represents a tilt level of 3.0 dB.
 .1.3.6.1.4.1.9.9.834.1.1.7.1.33
cooOtsController2EAmpliGainRange
This object represents the Egress amplifier gain range.
CiscoOpticalOtsAmpliGainRange
Type Values:
1normal
2extended
Description:
OTS ports associated to amplifier device, this value indicates
the working ranges available for amplifier gain.
Valid values are -

normal(1) : normal gain range
extended(2) : extended gain range
 .1.3.6.1.4.1.9.9.834.1.1.7.1.34
cooOtsController2ESafetyControlMode
This object is used to configure Egress safety control mode.
CiscoOpticalOtsAmpliSafetyCtrlModer/w
Type Values:
1auto
2disabled
Description:
OTS ports associated to amplifier device, this value indicates
how the safety compliaces regulation are statisfied.
Valid values are -

auto(1) : automatic safety control mode
disabled(2) : disabled safety…
 .1.3.6.1.4.1.9.9.834.1.1.7.1.35
cooOtsController2EAmpliOsri
This object is used to configure Egress OSRI.
CiscoOpticalOtsOsrir/w
Type Values:
1on
2off
Description:
OTS ports associated to amplifier device, this value indicates
the optical safety remote interlock (OSRI) status.
Valid values are -

on(1) : force laser shutdown for safety interlock
off(2) : normal operation
 .1.3.6.1.4.1.9.9.834.1.1.7.1.36
cooOtsController2TotLCTXPower
This object represents the transmit power(C+L) in
1/100 dBm on optical OTS interfaces.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.7.1.37
cooOtsController2TotLCRXPower
This object represents the receive power(C+L) in
1/100 dBm on optical OTS interfaces.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.7.1.38
cooOtsController2IForceApr
This object represents Force Automatic Power Reduction
for OTS interfaces.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.9.9.834.1.1.7.1.39
cooOtsController2EForceApr
This object represents Force Automatic Power Reduction
for OTS interfaces.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.9.9.834.1.1.7.1.40
cooOtsController2BrPower
This object represents the BR power in
1/100 dBm on optical OTS interfaces.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.7.1.41
cooOtsController2LedState
This object represents LED state for OTS
interfaces.
Enumeration
Enumerated Values:
0off
1greenOn
2greenFlashing
3yellowOn
4yellowFlashing
5redOn
6redFlashing
7na
 .1.3.6.1.4.1.9.9.834.1.1.7.1.42
cooOtsController2EAmpliBrRatio
This object represents EgressAmpliBrRatio for OTS
interfaces.
CiscoOpticalOtsBrRatioInDb
Type Constraints:
range: -5000..0
Description:
An integer value that represents BR Ratio
in dB.
Example: The value -4500 represents a BR Ratio
of -45.00 dB.
 .1.3.6.1.4.1.9.9.834.1.1.7.1.43
cooOtsController2AmpliControlModeConfigVal
This object represents the Configured Amplifier Control Mode Value for OTS interfaces.
CiscoOpticalOtsAmpliControlModer/w
Type Values:
1manual
2auto
3power
Description:
OTS ports associated to amplifier device, this value indicates
how the amplifier is controlled.
Valid values are -
manual(1) : manual control mode (An external entity has to
provide gain/tilt settings)
auto(2) : autom…
 .1.3.6.1.4.1.9.9.834.1.1.7.1.44
cooOtsController2EAmpliPowerConfigVal
This object represents the Configured Egress Amplifier Power Value in 1/100 dBm on optical OTS interfaces.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPowerr/w
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.7.1.45
cooOtsController2Temperature
This object represents the Controller Temperature in
1/100 C on optical OTS interfaces.
1/100 CCiscoOpticalOtsTemperature
Type Constraints:
range: -5000..10000
Description:
An integer value that represents Temperature
in Celsius for OTS controllers.
Example: The value 4500 represents a Temperature
45.00 C.
 .1.3.6.1.4.1.9.9.834.1.1.7.1.46
cooOtsController2Voltage
This object represents the Controller Voltage in
1/100 V on optical OTS interfaces.
1/100 VCiscoOpticalOtsVoltage
Type Constraints:
range: -5000..10000
Description:
An integer value that represents Voltage
for OTS controller.
Example: The value 350 represents a Voltage
3.50 V.
 .1.3.6.1.4.1.9.9.834.1.1.7.1.47
cooOtsController2EAmpliBrPower
This object represents EgressAmpliBrPower for OTS
interfaces.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.1.7.1.48

cooOtsThresholdTable

table
.1.3.6.1.4.1.9.9.834.1.2.1 · 1 row entry · 21 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cooOtsThresholdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-OPTICAL-OTS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-OPTICAL-OTS-MIB::cooOtsThresholdTable' 
This table provides threshold information for optical layer
related attributes of interfaces with an ifType of
opticalTransport(196) and interval type as
cooThreshIntervalType.
cooOtsThresholdEntry row .1.3.6.1.4.1.9.9.834.1.2.1.1
An entry containing threshold information on optical layer
related attributes of interfaces with an ifType
opticalTransport(196). Entries are created by the feature
when a new interface is added to the ifTable.
Indexes
Column Syntax OID
cooThreshIntervalType
This object represents the interval type during which the
performance statistics are accumulated for the interface.
CISCO-OPTICAL-MIBCoiIntervalType
Type Values:
1fifteenMin
2oneDay
3thirtySecond
 .1.3.6.1.4.1.9.9.834.1.2.1.1.1
cooThreshTXPowerMin
This object is used to configure the threshold of minimum
transmit power for the interface in 1/100 dBm.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPowerr/w
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.2.1.1.2
cooThreshRXPowerMin
This object is used to configure the threshold of minimum
receive power for the interface in 1/100 dBm.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPowerr/w
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.2.1.1.3
cooThreshLBCMin
This object is used to configure the threshold of minimum
laser bias current in 1/10 percent.
1/10 percentUnsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.9.9.834.1.2.1.1.4
cooThreshTXPowerMax
This object is used to configure the threshold of maximum
Transmit power for the interface in 1/100 dBm.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPowerr/w
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.2.1.1.5
cooThreshRXPowerMax
This object is used to configure the threshold of maximum
receive power for the interface in 1/100 dBm.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPowerr/w
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.2.1.1.6
cooThreshLBCMax
This object is used to configure the threshold of maximum
Laser Bias Current in 1/10 percent for the interface.
1/10 percentUnsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.9.9.834.1.2.1.1.7
cooThreshTXPowerEnableMin
This object is used to configure the enablement of threshold
minimum transmit power for the interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.834.1.2.1.1.8
cooThreshRXPowerEnableMin
This object is used to configure the enablement of the
threshold minimum receive power for the interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.834.1.2.1.1.9
cooThreshLBCEnableMin
This object is used to configure the enablement of the
threshold minimum laser bias current for the interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.834.1.2.1.1.10
cooThreshTXPowerEnableMax
This object is used to configure the enablement of the
threshold maximum transmit power for the interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.834.1.2.1.1.11
cooThreshRXPowerEnableMax
This object is used to configure the enablement of the
threshold maximum receive power for the interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.834.1.2.1.1.12
cooThreshLBCEnableMax
This object is used to configure the enablement of the
threshold maximum laser bias current for the interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.834.1.2.1.1.13
cooThreshAmpliGainMin
This object is used to configure the threshold of minimum ampli
gain for the interface in 1/100 dB.
1/100 dBInteger32r/w
Constraints:
range: 0-500
 .1.3.6.1.4.1.9.9.834.1.2.1.1.14
cooThreshAmpliGainMax
This object is used to configure the threshold of maximum ampli
gain for the interface in 1/100 dB.
1/100 dBInteger32r/w
Constraints:
range: 0-500
 .1.3.6.1.4.1.9.9.834.1.2.1.1.15
cooThreshAmpliGainEnableMax
This object is used to configure the enablement of the
threshold maximum ampli gain for the interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.834.1.2.1.1.16
cooThreshAmpliGainEnableMin
This object is used to configure the enablement of the
threshold minimum ampli gain for the interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.834.1.2.1.1.17
cooThreshAmpliGainTiltMin
This object is used to configure the threshold of minimum ampli
gain tilt for the interface in 1/100 dB.
1/100 dBInteger32r/w
Constraints:
range: -50-50
 .1.3.6.1.4.1.9.9.834.1.2.1.1.18
cooThreshAmpliGainTiltMax
This object is used to configure the threshold of maximum ampli
gain tilt for the interface in 1/100 dB.
1/100 dbInteger32r/w
Constraints:
range: -50-50
 .1.3.6.1.4.1.9.9.834.1.2.1.1.19
cooThreshAmpliGainTiltEnableMax
This object is used to configure the enablement of the
threshold maximum ampli gain tilt for the interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.834.1.2.1.1.20
cooThreshAmpliGainTiltEnableMin
This object is used to configure the enablement of the
threshold minimum ampli gain tilt for the interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.834.1.2.1.1.21

cooOtsCurrentTable

table
.1.3.6.1.4.1.9.9.834.1.2.2 · 1 row entry · 35 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cooOtsCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-OPTICAL-OTS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-OPTICAL-OTS-MIB::cooOtsCurrentTable' 
This table provides current information for optical layer
related attributes of interfaces with an ifType of
opticalChannel(196), lane as cooCurrentLane and interval
as cooCurrentIntervalType.
cooOtsCurrentEntry row .1.3.6.1.4.1.9.9.834.1.2.2.1
An entry containing current information on optical layer
related attributes of interfaces with an ifType
opticalChannel(196). Entries are created by the feature when
a new interface is added to the ifTable.
Indexes
Column Syntax OID
cooCurrentIntervalType
This object represents the interval type during which the
current performance statistics are accumulated.
CISCO-OPTICAL-MIBCoiIntervalType
Type Values:
1fifteenMin
2oneDay
3thirtySecond
 .1.3.6.1.4.1.9.9.834.1.2.2.1.1
cooCurrentTXPowerMax
This object specifies the current maximum transmit power
for the interface in 1/100 dBm.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.2.2.1.2
cooCurrentRXPowerMax
This object specifies the current maximum receive power for the
interface in 1/100 dBm.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.2.2.1.3
cooCurrentLBCMax
This object specifies the current maximum laser bias current in
1/10 percent for the interface.
1/10 percentUnsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.9.9.834.1.2.2.1.4
cooCurrentTXPowerMin
This object specifies the current minimum transmit power for
the
interface in 1/100 dBm.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.2.2.1.5
cooCurrentRXPowerMin
This object specifies the current minimum receive power for the
interface in 1/100 dBm.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.2.2.1.6
cooCurrentLBCMin
This object specifies the current minimum laser bias current in
1/10 percent for the interface.
1/10 percentUnsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.9.9.834.1.2.2.1.7
cooCurrentTXPowerAvg
This object specifies the current average transmit power
for the interface in 1/100 dBm.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.2.2.1.8
cooCurrentRXPowerAvg
This object specifies the current average receive power
for the interface in 1/100 dBm.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.2.2.1.9
cooCurrentLBCAvg
This object specifies the current average Laser Bias Current
in 1/10 percent for the interface.
1/10 percentUnsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.9.9.834.1.2.2.1.10
cooCurrentTimestamp
This object specifies the timestamp for
the current bucket for the interface.
OctetString .1.3.6.1.4.1.9.9.834.1.2.2.1.11
cooCurrentAmpliGainMin
This object specifies the current minimum amplifier gain for
the
interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.2.1.12
cooCurrentAmpliGainMax
This object specifies the current maximum amplifier gain for
the
interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.2.1.13
cooCurrentAmpliGainAvg
This object specifies the current average amplifier gain for
the interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.2.1.14
cooCurrentAmpliGainTiltMin
This object specifies the current minimum amplifier gain tilt
for
the interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.2.1.15
cooCurrentAmpliGainTiltMax
This object specifies the current maximum amplifier gain tilt
for
the interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.2.1.16
cooCurrentAmpliGainTiltAvg
This object specifies the current average amplifier gain tilt
for
the interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.2.1.17
cooCurrentTXPowerCLMin
This object specifies the current minimum transmit power C+L
for the interface in 1/100 dBm.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.2.2.1.18
cooCurrentTXPowerCLMax
This object specifies the current maximum transmit power C+L
for the interface in 1/100 dBm.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.2.2.1.19
cooCurrentTXPowerCLAvg
This object specifies the current Average transmit power C+L
for the interface in 1/100 dBm.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.2.2.1.20
cooCurrentRXPowerCLMin
This object specifies the current minimum receive power
for the interface in 1/100 dBm.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.2.2.1.21
cooCurrentRXPowerCLMax
This object specifies the current maximun receive power
for the interface in 1/100 dBm.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.2.2.1.22
cooCurrentRXPowerCLAvg
This object specifies the current average receive power
for the interface in 1/100 dBm.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.2.2.1.23
cooCurrentIAmpliGainMin
This object specifies the current minimum ingress amplifier gain for
the
interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.2.1.24
cooCurrentIAmpliGainMax
This object specifies the current maximum ingress amplifier gain for
the
interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.2.1.25
cooCurrentIAmpliGainAvg
This object specifies the current average ingress amplifier gain for
the
interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.2.1.26
cooCurrentEAmpliGainMin
This object specifies the current minimum egress amplifier gain for
the
interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.2.1.27
cooCurrentEAmpliGainMax
This object specifies the current maximum egress amplifier gain for
the
interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.2.1.28
cooCurrentEAmpliGainAvg
This object specifies the current average egress amplifier gain for
the
interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.2.1.29
cooCurrentIAmpliGainTiltMin
This object specifies the current minimum ingress amplifier gain tilt for
the
interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.2.1.30
cooCurrentIAmpliGainTiltMax
This object specifies the current maximum ingress amplifier gain tilt for
the
interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.2.1.31
cooCurrentIAmpliGainTiltAvg
This object specifies the current average ingress amplifier gain tilt for
the
interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.2.1.32
cooCurrentEAmpliGainTiltMin
This object specifies the current minimum egress amplifier gain tilt for
the
interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.2.1.33
cooCurrentEAmpliGainTiltMax
This object specifies the current maximum egress amplifier gain tilt for
the
interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.2.1.34
cooCurrentEAmpliGainTiltAvg
This object specifies the current average egress amplifier gain tilt for
the
interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.2.1.35

cooOtsIntervalTable

table
.1.3.6.1.4.1.9.9.834.1.2.3 · 1 row entry · 36 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cooOtsIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-OPTICAL-OTS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-OPTICAL-OTS-MIB::cooOtsIntervalTable' 
This table provides interval information for optical layer
related attributes of interfaces with an ifType of
opticalChannel(196), lane as cooIntervalLane, Interval as
cooIntervalIntervalType and history bucket as
cooIntervalIntervalType.
cooOtsIntervalEntry row .1.3.6.1.4.1.9.9.834.1.2.3.1
An entry containing interval information on optical layer
related attributes of interfaces with an ifType
opticalChannel(196). Entries are created by the feature when a
new interface is added to the ifTable.
Indexes
Column Syntax OID
cooIntervalType
This object represents the interval type during which the
performance statistics are accumulated.
CISCO-OPTICAL-MIBCoiIntervalType
Type Values:
1fifteenMin
2oneDay
3thirtySecond
 .1.3.6.1.4.1.9.9.834.1.2.3.1.1
cooIntervalNum
This object identifies the interval for which the set of
interval performance values is available.
The interval identified by 1 is the most recent 15 minute
or 24 hour interval, and the interval identified by N is
the i…
Unsigned32
Constraints:
range: 1-31
 .1.3.6.1.4.1.9.9.834.1.2.3.1.2
cooIntervalTXPowerMax
This object specifies the interval maximum transmit power in
1/100 dBm for the interface.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.2.3.1.3
cooIntervalRXPowerMax
This object specifies the interval maximum receive power in
1/100 dBm for the interface.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.2.3.1.4
cooIntervalLBCMax
This object specifies the interval maximum laser bias current
in 1/10 percent for the interface.
1/10 percentUnsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.9.9.834.1.2.3.1.5
cooIntervalTXPowerMin
This object specifies the interval minimum transmit power in
1/100 dBm for the interface.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.2.3.1.6
cooIntervalRXPowerMin
This object specifies the interval minimum receive power in
1/100 dBm for the interface.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.2.3.1.7
cooIntervalLBCMin
This object specifies the interval minimum laser bias current
in 1/10 percent for the interface.
1/10 percentUnsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.9.9.834.1.2.3.1.8
cooIntervalTXPowerAvg
This object specifies the interval average transmit power in
1/100 dBm for the interface.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.2.3.1.9
cooIntervalRXPowerAvg
This object specifies the interval average receive power in
1/100 dBm for the interface.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.2.3.1.10
cooIntervalLBCAvg
This object specifies the interval average laser bias current
in 1/10 percent for the interface.
1/10 percentUnsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.9.9.834.1.2.3.1.11
cooIntervalTimestamp
This object specifies the timestamp, for the bucket specified
by 'cooIntervalNum', for the interface.
OctetString .1.3.6.1.4.1.9.9.834.1.2.3.1.12
cooIntervalAmpliGainMin
This object specifies the interval minimum amplifier gain in
1/100 dB for the interface.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.3.1.13
cooIntervalAmpliGainMax
This object specifies the interval maximum amplifier gain in
1/100 dB for the interface.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.3.1.14
cooIntervalAmpliGainAvg
This object specifies the interval acerage amplifier gain in
1/100 dB for the interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.3.1.15
cooIntervalAmpliGainTiltMin
This object specifies the interval minimum amplifier gain tilt
in 1/100 dB for the interface.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.3.1.16
cooIntervalAmpliGainTiltMax
This object specifies the interval maximum amplifier gain tilt
in 1/100 dB for the interface.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.3.1.17
cooIntervalAmpliGainTiltAvg
This object specifies the interval average amplifier gain tilt
in 1/100 dB for the interface.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.3.1.18
cooIntervalTXPowerCLMin
This object specifies the interval minimum transmit power C+L
for the interface in 1/100 dBm.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.2.3.1.19
cooIntervalTXPowerCLMax
This object specifies the interval maximum transmit power C+L
for the interface in 1/100 dBm.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.2.3.1.20
cooIntervalTXPowerCLAvg
This object specifies the interval Average transmit power C+L
for the interface in 1/100 dBm.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.2.3.1.21
cooIntervalRXPowerCLMin
This object specifies the interval minimum receive power
for the interface in 1/100 dBm.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.2.3.1.22
cooIntervalRXPowerCLMax
This object specifies the interval maximun receive power
for the interface in 1/100 dBm.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.2.3.1.23
cooIntervalRXPowerCLAvg
This object specifies the interval average receive power
for the interface in 1/100 dBm.
1/100 dBmCISCO-OPTICAL-MIBCoiOpticalPower
Type Constraints:
range: -4000..3000
 .1.3.6.1.4.1.9.9.834.1.2.3.1.24
cooIntervalIAmpliGainMin
This object specifies the interval minimum ingress amplifier gain for
the
interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.3.1.25
cooIntervalIAmpliGainMax
This object specifies the interval maximum ingress amplifier gain for
the
interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.3.1.26
cooIntervalIAmpliGainAvg
This object specifies the interval average ingress amplifier gain for
the
interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.3.1.27
cooIntervalEAmpliGainMin
This object specifies the interval minimum egress amplifier gain for
the
interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.3.1.28
cooIntervalEAmpliGainMax
This object specifies the interval maximum egress amplifier gain for
the
interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.3.1.29
cooIntervalEAmpliGainAvg
This object specifies the interval average egress amplifier gain for
the
interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.3.1.30
cooIntervalIAmpliGainTiltMin
This object specifies the interval minimum ingress amplifier gain tilt for
the
interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.3.1.31
cooIntervalIAmpliGainTiltMax
This object specifies the interval maximum ingress amplifier gain tilt for
the
interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.3.1.32
cooIntervalIAmpliGainTiltAvg
This object specifies the interval average ingress amplifier gain tilt for
the
interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.3.1.33
cooIntervalEAmpliGainTiltMin
This object specifies the interval minimum egress amplifier gain tilt for
the
interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.3.1.34
cooIntervalEAmpliGainTiltMax
This object specifies the interval maximum egress amplifier gain tilt for
the
interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.3.1.35
cooIntervalEAmpliGainTiltAvg
This object specifies the interval average egress amplifier gain tilt for
the
interface in 1/100 dB.
1/100 dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.834.1.2.3.1.36