CISCO-OPTICAL-MONITORING-MIB
This MIB module is used to monitor optical parameters
of a network element.This MIB deals with the operating
parameters of the optical layer. The optical layer is a
term that defines all the devices/systems that deal with
the conversion of data in it's electrical form to optical
form, transmission of the optical data, reception, and
finally re-conversion to electrical signals.
- Source file
CISCO-OPTICAL-MONITORING-MIB- Last revised
- Identity
ciscoOpticalMonitoringMIB- Base OID
1.3.6.1.4.1.9.10.83
Imported Objects
| CISCO-SMI | ciscoExperiment |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) |
| SNMPv2-TC | TruthValue |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-OPTICAL-MONITORING-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-OPTICAL-MONITORING-MIB::ciscoOpticalMonitoringMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-OPTICAL-MONITORING-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-OPTICAL-MONITORING-MIB::ciscoOpticalMonitoringMIB'
Objects (18)
Showing 18 of 18 objects
Object legend
Table
Row
Column
Scalar
Node
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.9.10.83 |
||
.1.3.6.1.4.1.9.10.83.1 |
||
.1.3.6.1.4.1.9.10.83.1.1 |
||
.1.3.6.1.4.1.9.10.83.1.1.1 |
||
.1.3.6.1.4.1.9.10.83.1.1.1.1 |
||
|
milliampsInteger32
|
.1.3.6.1.4.1.9.10.83.1.1.1.1.1 |
|
.1.3.6.1.4.1.9.10.83.1.1.1.1.2 |
||
|
microWattsInteger32
|
.1.3.6.1.4.1.9.10.83.1.1.1.1.3 |
|
.1.3.6.1.4.1.9.10.83.1.1.1.1.4 |
||
|
Degree CentigradeInteger32
|
.1.3.6.1.4.1.9.10.83.1.1.1.1.5 |
|
|
microWattsInteger32
|
.1.3.6.1.4.1.9.10.83.1.1.1.1.6 |
|
.1.3.6.1.4.1.9.10.83.1.1.1.1.7 |
||
|
microWattsInteger32
|
.1.3.6.1.4.1.9.10.83.1.1.1.1.8 |
|
.1.3.6.1.4.1.9.10.83.2 |
||
.1.3.6.1.4.1.9.10.83.2.0 |
||
.1.3.6.1.4.1.9.10.83.3 |
||
.1.3.6.1.4.1.9.10.83.3.1 |
||
.1.3.6.1.4.1.9.10.83.3.2 |
Dependencies (7) 5 direct · 2 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CISCO-SMIcisco
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- CISCO-OPTICAL-MONITORING-MIBciscoselected
Conformance Groups (1)
|
comTxBiasCurrent comTxPowerSupported comTxPower comTxLaserTempSupported comTxLaserTemp comRxPowerACDC comRxPowerACSupported comRxPowerAC
Parameters of the optical interfaces.
|
.1.3.6.1.4.1.9.10.83.3.2.1
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.9.10.83.3.1.1The compliance statement for entities which implement
the Cisco Optical Monitoring MIB.
the Cisco Optical Monitoring MIB.
Required groups
| mandatory | ciscoOpticalMonMIBParamGroup |