CISCO-OPTICAL-IF-EXTN-MIB

        A MIB module containing extensions to the IF-MIB for optical
interfaces.
    
Source file
CISCO-OPTICAL-IF-EXTN-MIB
Last revised
Identity
ciscoOpticalIfExtnMIB
Base OID
1.3.6.1.4.1.9.10.66
Imported Objects
CISCO-SMI ciscoExperiment
IF-MIB ifIndex
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC TEXTUAL-CONVENTION (no object page)
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-OPTICAL-IF-EXTN-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-OPTICAL-IF-EXTN-MIB::ciscoOpticalIfExtnMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-OPTICAL-IF-EXTN-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-OPTICAL-IF-EXTN-MIB::ciscoOpticalIfExtnMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (36)
.1.3.6.1.4.1.9.10.66
.1.3.6.1.4.1.9.10.66.1
.1.3.6.1.4.1.9.10.66.1.1
.1.3.6.1.4.1.9.10.66.1.1.1
.1.3.6.1.4.1.9.10.66.1.1.1.1
Enumeration
.1.3.6.1.4.1.9.10.66.1.1.1.1.1
.1.3.6.1.4.1.9.10.66.1.2
.1.3.6.1.4.1.9.10.66.1.2.1
.1.3.6.1.4.1.9.10.66.1.2.1.1
.1.3.6.1.4.1.9.10.66.1.2.1.1.1
.1.3.6.1.4.1.9.10.66.1.3
.1.3.6.1.4.1.9.10.66.1.3.3
.1.3.6.1.4.1.9.10.66.1.3.3.1
.1.3.6.1.4.1.9.10.66.1.3.3.1.1
GHzUnsigned32
.1.3.6.1.4.1.9.10.66.1.3.3.1.2
Enumeration
.1.3.6.1.4.1.9.10.66.1.3.3.1.3
OctetString
.1.3.6.1.4.1.9.10.66.1.3.3.1.4
.1.3.6.1.4.1.9.10.66.1.4
.1.3.6.1.4.1.9.10.66.1.4.1
.1.3.6.1.4.1.9.10.66.1.4.1.1
Enumeration
.1.3.6.1.4.1.9.10.66.1.4.1.1.1
Enumeration
.1.3.6.1.4.1.9.10.66.1.4.1.1.10
millisecondsUnsigned32
.1.3.6.1.4.1.9.10.66.1.4.1.1.11
secondsUnsigned32
.1.3.6.1.4.1.9.10.66.1.4.1.1.12
secondsUnsigned32
.1.3.6.1.4.1.9.10.66.1.4.1.1.13
Enumeration
.1.3.6.1.4.1.9.10.66.1.4.1.1.2
.1.3.6.1.4.1.9.10.66.1.4.1.1.3
GHzUnsigned32
.1.3.6.1.4.1.9.10.66.1.4.1.1.4
OctetString
.1.3.6.1.4.1.9.10.66.1.4.1.1.5
Enumeration
.1.3.6.1.4.1.9.10.66.1.4.1.1.6
Enumeration
.1.3.6.1.4.1.9.10.66.1.4.1.1.7
Enumeration
.1.3.6.1.4.1.9.10.66.1.4.1.1.8
Enumeration
.1.3.6.1.4.1.9.10.66.1.4.1.1.9
.1.3.6.1.4.1.9.10.66.3
.1.3.6.1.4.1.9.10.66.3.1
.1.3.6.1.4.1.9.10.66.3.2
Dependencies (7) 5 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCO-SMIcisco
  3. SNMPv2-TCrfc
  4. IANAifType-MIBrfc
  5. SNMPv2-CONFrfc
  6. SNMPv2-MIBrfc
  7. IF-MIBrfc
  8. CISCO-OPTICAL-IF-EXTN-MIBciscoselected
Type Definitions (2)
Unsigned32 range: 1..1000000
Unsigned32 range: 0..1000000
Conformance Groups (6)
A collection of managed objects providing extensions to the
interface type information found in the IF-MIB.
.1.3.6.1.4.1.9.10.66.3.2.1
A collection of managed objects providing information about
the wavelength or frequency of optical interfaces.
.1.3.6.1.4.1.9.10.66.3.2.2
A collection of managed objects providing information about
DWDM channel groups.
.1.3.6.1.4.1.9.10.66.3.2.3
A collection of managed objects for control of transceivers
(lasers and optical receivers) at optoelectronic interfaces.
.1.3.6.1.4.1.9.10.66.3.2.4
A collection of managed objects providing information about
tunable lasers.
.1.3.6.1.4.1.9.10.66.3.2.5
A collection of managed objects for Laser Safety Control (LSC)
mechanisms such as Automatic Laser Shutdown (ALS).
.1.3.6.1.4.1.9.10.66.3.2.6
Compliance Statements (2)

OID .1.3.6.1.4.1.9.10.66.3.1.1
The compliance statement for the Cisco Optical Interface
Extensions MIB.
Required groups
mandatory coIfWavelengthMIBGroup
optional coIfTypeExtnMIBGroup This group should be implemented only by entities
containing interfaces whose type is not defined in the
IANAifType textual convention.
optional coIfDwdmChannelGroupMIBGroup This group is required for systems supporting interfaces
representing groups of DWDM channels. This includes
interfaces with coIfTypeExtn value of
'wdmChannelGroup'.
Object refinements
ObjectAccessSyntaxDescription
coIfDwdmFrequency readonly
Write-access applies only when interfaces with tunable
lasers or tunable filters are present.

This object is supported by entities with interfaces that
carry a single wavelength or frequency. This includes
interfaces with coIfTypeExtn value of
'wdmChannel' and 'wavelengthTransport'. This also includes
optoelectronic interfaces that originate and terminate
DWDM wavelengths, including some of the interfaces with
coIfTypeExtn value of 'opticalTransponder'.
coIfDwdmChannelGroupMinFrequency readonly
Write-access applies only when tunable or switchable
filters are present.
coIfDwdmChannelGroupSpacing readonly
Write-access applies only when tunable or switchable
filters are present.
coIfDwdmChannelGroupBitmapLogic readonly
Write-access applies only when tunable or switchable
filters are present.
coIfDwdmChannelGroupBitmap readonly
Write-access applies only when tunable or switchable
filters are present.

OID .1.3.6.1.4.1.9.10.66.3.1.2
The compliance statement for the Cisco Optical Interface
Extensions MIB.
Required groups
mandatory coIfWavelengthMIBGroup
optional coIfTypeExtnMIBGroup This group should be implemented only by entities
containing interfaces whose type is not defined in the
IANAifType textual convention.
optional coIfDwdmChannelGroupMIBGroup This group is required for systems supporting interfaces
representing groups of DWDM channels. This includes
interfaces with coIfTypeExtn value of
'wdmChannelGroup'.
optional coIfXcvrBaseMIBGroup This group is optional.
optional coIfXcvrTunableLaserMIBGroup This group is required for systems supporting tunable
lasers.
optional coIfXcvrLSCMIBGroup This group is required for systems supporting Laser Safety
Control (LSC) mechanisms such as Automatic Laser Shutdown
(ALS).
Object refinements
ObjectAccessSyntaxDescription
coIfDwdmFrequency readonly
Write-access applies only when interfaces with tunable
lasers or tunable filters are present.

This object is supported by entities with interfaces that
carry a single wavelength or frequency. This includes
interfaces with coIfTypeExtn value of
'wdmChannel' and 'wavelengthTransport'. This also includes
optoelectronic interfaces that originate and terminate
DWDM wavelengths, including some of the interfaces with
coIfTypeExtn value of 'opticalTransponder'.
coIfDwdmChannelGroupMinFrequency readonly
Write-access applies only when tunable or switchable
filters are present.
coIfDwdmChannelGroupSpacing readonly
Write-access applies only when tunable or switchable
filters are present.
coIfDwdmChannelGroupBitmapLogic readonly
Write-access applies only when tunable or switchable
filters are present.
coIfDwdmChannelGroupBitmap readonly
Write-access applies only when tunable or switchable
filters are present.
coIfXcvrLaserAdminStatus readonly
Write access is not required.
coIfXcvrForwardLaserControl readonly
Write access is not required.
coIfXcvrLSCProtocol readonly
Write access is not required.
coIfXcvrLSCRestartMode readonly
Write access is not required.
coIfXcvrLSCManualRestart readonly
Write access is not required.
coIfXcvrLSCPulseLength readonly
Write access is not required.
coIfXcvrLSCTestPulseLength readonly
Write access is not required.
coIfXcvrLSCPulseRepetitionTime readonly
Write access is not required.