CISCO-MOBILITY-TAP-MIB
This module manages Cisco's intercept feature for
Mobility Gateway Products.
This MIB is used along with CISCO-TAP2-MIB MIB to
intercept Mobility Gateway traffic. CISCO-TAP2-MIB MIB
along with specific filter MIBs like this MIB replace
the CISCO-TAP-MIB MIB.
To create a Mobility intercept, an entry
cmtapStreamEntry is created which contains the filter
details. An entry cTap2StreamEntry of CISCO-TAP2-MIB is
created which is the common stream information for all
kinds of intercepts and type of the specific stream is
set to 'mobility' in this entry.
- Source file
CISCO-MOBILITY-TAP-MIB- Last revised
- Identity
ciscoMobilityTapMIB- Base OID
1.3.6.1.4.1.9.9.672
Imported Objects
| CISCO-SMI | ciscoMgmt |
| CISCO-TAP2-MIB | cTap2MediationContentId cTap2StreamIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) |
| SNMPv2-TC | RowStatus StorageType TEXTUAL-CONVENTION (no object page) TruthValue |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-MOBILITY-TAP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-MOBILITY-TAP-MIB::ciscoMobilityTapMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MOBILITY-TAP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MOBILITY-TAP-MIB::ciscoMobilityTapMIB'
Objects (19)
Showing 19 of 19 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.9.9.672 |
||
.1.3.6.1.4.1.9.9.672.0 |
||
.1.3.6.1.4.1.9.9.672.1 |
||
.1.3.6.1.4.1.9.9.672.1.1 |
||
|
Bits
|
.1.3.6.1.4.1.9.9.672.1.1.1 |
|
.1.3.6.1.4.1.9.9.672.1.1.2 |
||
.1.3.6.1.4.1.9.9.672.1.1.2.1 |
||
.1.3.6.1.4.1.9.9.672.1.1.2.1.1 |
||
.1.3.6.1.4.1.9.9.672.1.1.2.1.2 |
||
.1.3.6.1.4.1.9.9.672.1.1.2.1.3 |
||
.1.3.6.1.4.1.9.9.672.1.1.2.1.4 |
||
.1.3.6.1.4.1.9.9.672.1.1.2.1.5 |
||
.1.3.6.1.4.1.9.9.672.1.1.2.1.6 |
||
.1.3.6.1.4.1.9.9.672.1.1.2.1.7 |
||
.1.3.6.1.4.1.9.9.672.1.1.2.1.8 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.672.1.1.2.1.9 |
|
.1.3.6.1.4.1.9.9.672.2 |
||
.1.3.6.1.4.1.9.9.672.2.1 |
||
.1.3.6.1.4.1.9.9.672.2.2 |
Dependencies (10) 5 direct · 5 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CISCO-SMIcisco
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- INET-ADDRESS-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- CISCO-TAP2-MIBcisco
- CISCO-MOBILITY-TAP-MIBciscoselected
Type Definitions (3)
| OctetString |
range: 3..256 |
|
| OctetString |
range: 3..256 |
|
| Enumeration |
unknown(1)msid(2)imsi(3)nai(4)esn(5)servedMdn(6) |
Conformance Groups (3)
|
A collection of objects which provide Mobility Gateway
capabilities for the system. |
.1.3.6.1.4.1.9.9.672.2.2.1
|
|
|
cmtapStreamCalledSubscriberIDType cmtapStreamCalledSubscriberID cmtapStreamSubscriberIDType cmtapStreamSubscriberID cmtapStreamStorageType cmtapStreamStatus
A collection of objects which provide information about
the stream from which we wish to intercept packets. |
.1.3.6.1.4.1.9.9.672.2.2.2
|
|
|
A collection of objects which provide additional information
about the stream from which we wish to intercept packets. |
.1.3.6.1.4.1.9.9.672.2.2.3
|
Compliance Statements (2)
OID
.1.3.6.1.4.1.9.9.672.2.1.1The compliance statement for entities which implement the
Cisco Intercept MIB for Mobility Gateways
Cisco Intercept MIB for Mobility Gateways
Required groups
| mandatory | ciscoMobilityTapCapabilityGroup | |
| optional | ciscoMobilityTapStreamGroup | Implementation of this group is optional. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| cmtapStreamCalledSubscriberIDType | readonly | Write access is not required. | |
| cmtapStreamCalledSubscriberID | readonly | Write access is not required. | |
| cmtapStreamSubscriberIDType | readonly | Write access is not required. | |
| cmtapStreamSubscriberID | readonly | Write access is not required. | |
| cmtapStreamStorageType | readonly | Write access is not required. | |
| cmtapStreamStatus | readonly | Write access is not required. |
OID
.1.3.6.1.4.1.9.9.672.2.1.2The compliance statement for entities which implement the Cisco
Intercept MIB for Mobility Gateways.
Intercept MIB for Mobility Gateways.
Required groups
| mandatory | ciscoMobilityTapCapabilityGroup | |
| optional | ciscoMobilityTapStreamGroup | Implementation of this group is optional. |
| optional | ciscoMobilityTapStreamGroupSup1 |
Implementation of this group is conditionally mandatory if the ciscoMobilityTapStreamGroup is implemented and lawful interception for 4G mobile calls is supported. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| cmtapStreamCalledSubscriberIDType | readonly | Write access is not required. | |
| cmtapStreamSubscriberIDType | readonly | Write access is not required. | |
| cmtapStreamStorageType | readonly | Write access is not required. | |
| cmtapStreamCalledSubscriberID | readonly | Write access is not required. | |
| cmtapStreamSubscriberID | readonly | Write access is not required. | |
| cmtapStreamStatus | readonly | Write access is not required. |