CISCO-MGX8800-IF-MAPPING-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
4

cmimPhysToIfTable

table
.1.3.6.1.4.1.351.150.7.1.1.1 · 1 row entry · 4 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cmimPhysToIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MGX8800-IF-MAPPING-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MGX8800-IF-MAPPING-MIB::cmimPhysToIfTable' 
This table contains one or more rows, representing 
mappings of physical or logical interfaces to ifIndex
values.
cmimPhysToIfEntry row .1.3.6.1.4.1.351.150.7.1.1.1.1
Information about a particular physical interface or
logical interface.
Indexes
Column Syntax OID
cmimModuleIndex
An index value that uniquely identifies the location
of the module or a physical line.
It has the information on slot number, back card
and physical line number. Following is the mapping
used for this object.
…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.150.7.1.1.1.1.1
cmimIfNumber
An index value uniquely identifies the interface
number (physical, logical) of the module. The
value specified depends on the value specified in
cmimIfType.

cmimIfType cmimIfNumber
----…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.150.7.1.1.1.1.2
cmimIfType
The type of interface specified by cmimIfNumber.
CmimIfType
Type Values:
1physicalLine
2atmIma
3atm
4atmVirtual
5ds1Inds3
6adjCardApsLine
7propAtm
8sonetVT
9imaGrpAtmPhy
10srmBertLine
11srmBertPort
12sonetPath
13ds3SonetPath
14atmSonetPath
15atmDs3SonetPath
16frameRelayPort
17ces
18ds1VTPath
19ds1Ds3SonetPath
20atmVciEndPt
21mfrBundle
22ppplink
23pppMpbundle
24lapd
 .1.3.6.1.4.1.351.150.7.1.1.1.1.3
cmimIfIndex
The value of the instance of the ifIndex object,
defined in MIB-II, for the interface corresponding
to the INDEXes specified in the table.

Note that the values returned for cmimIfType=srmBertLine(10)
and…
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.351.150.7.1.1.1.1.4