CISCO-MGX8800-IF-MAPPING-MIB
This MIB module is used for getting the ifIndex values
given physical location and/or logical information.
The physical information includes the slot, back-card
and physical line, IMA group ID, MFR (Multilink Frame Relay)
bundle etc. The logical information includes the logical
interface or virtual interface number.
In this MIB back card, bay, line module are used to
refer to the back card.
- Source file
CISCO-MGX8800-IF-MAPPING-MIB- Last revised
- Identity
ciscoMGX8800IfMappingMIB- Base OID
1.3.6.1.4.1.351.150.7
Imported Objects
| CISCOWAN-SMI | ciscoWan |
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION (no object page) |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-MGX8800-IF-MAPPING-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-MGX8800-IF-MAPPING-MIB::ciscoMGX8800IfMappingMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MGX8800-IF-MAPPING-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MGX8800-IF-MAPPING-MIB::ciscoMGX8800IfMappingMIB'
Objects (12)
Showing 12 of 12 objects
Object legend
Table
Row
Column
Scalar
Node
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.351.150.7 |
||
.1.3.6.1.4.1.351.150.7.1 |
||
.1.3.6.1.4.1.351.150.7.1.1 |
||
.1.3.6.1.4.1.351.150.7.1.1.1 |
||
.1.3.6.1.4.1.351.150.7.1.1.1.1 |
||
.1.3.6.1.4.1.351.150.7.1.1.1.1.1 |
||
.1.3.6.1.4.1.351.150.7.1.1.1.1.2 |
||
.1.3.6.1.4.1.351.150.7.1.1.1.1.3 |
||
.1.3.6.1.4.1.351.150.7.1.1.1.1.4 |
||
.1.3.6.1.4.1.351.150.7.3 |
||
.1.3.6.1.4.1.351.150.7.3.1 |
||
.1.3.6.1.4.1.351.150.7.3.2 |
Dependencies (7) 5 direct · 2 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CISCOWAN-SMIcisco
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- CISCO-MGX8800-IF-MAPPING-MIBciscoselected
Type Definitions (1)
| Enumeration |
physicalLine(1)atmIma(2)atm(3)atmVirtual(4)ds1Inds3(5)adjCardApsLine(6)propAtm(7)sonetVT(8)imaGrpAtmPhy(9)srmBertLine(10)srmBertPort(11)sonetPath(12)ds3SonetPath(13)atmSonetPath(14)atmDs3SonetPath(15)frameRelayPort(16)ces(17)ds1VTPath(18)ds1Ds3SonetPath(19)atmVciEndPt(20)mfrBundle(21)ppplink(22)pppMpbundle(23)lapd(24) |
Conformance Groups (1)
|
This group has to be implemented on all MGX8800
series products. |
.1.3.6.1.4.1.351.150.7.3.2.1
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.351.150.7.3.1.1The compliance statement for cmimPhystoIfTable.
Required groups
| mandatory | cmimPhysToIfMIBGroup |