CISCO-MGX82XX-VIRTUAL-PORT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
37

vrtlIntrConfigTable

table
.1.3.6.1.4.1.351.110.5.2.8.1.1 · 1 row entry · 7 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk vrtlIntrConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MGX82XX-VIRTUAL-PORT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MGX82XX-VIRTUAL-PORT-MIB::vrtlIntrConfigTable' 
Virtual Interface Configuration Table.
vrtlIntrConfigEntry row .1.3.6.1.4.1.351.110.5.2.8.1.1.1
An entry in the Virtual Interface configuration Table.
Indexes
Column Syntax OID
configVrtlIntrNum
Virtual Interface Number. There are totaly.
32 Virtual Interfaces on the card (egress).
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.351.110.5.2.8.1.1.1.1
vrtlIntrPortNum
Port number which will be connected to the
Virtual Interface. Value zero meens that this
virtual interface is not connected to any port.
Integer32r/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.351.110.5.2.8.1.1.1.2
vrtlIntrState
Virtual Interface State.
Enumerationr/w
Enumerated Values:
1down
2up
 .1.3.6.1.4.1.351.110.5.2.8.1.1.1.3
vrtlIntrMaxQueMem
Virtual Interface's Max queue memory.
1 = 4Kcells
2 = 8Kcells
3 = 16Kcells
4 = 32Kcells
5 = 64Kcells
6 = 128Kcells
7 = 256Kcells
8 = 512Kcells.
Integer32r/w
Constraints:
range: 1-8
 .1.3.6.1.4.1.351.110.5.2.8.1.1.1.4
vrtlIntrMinCellRate
Virtual Interface's minimum cell rate.
The default value:
for OC12 port is 1412832 cells/sec
for OC3 port is 353208 cells/sec
for T3 port is 96000 cells/sec
for E3 port is 80000 cells/sec
Integer32r/w
Constraints:
range: 103384-353208
 .1.3.6.1.4.1.351.110.5.2.8.1.1.1.5
vrtlIntrMaxCellRate
Virtual Interface's maximum cell rate.
The default value:
for OC12 port is 1412832 cells/sec
for OC3 port is 353208 cells/sec
for T3 port is 96000 cells/sec
for E3 port is 80000 cells/sec
Integer32r/w
Constraints:
range: 103384-353208
 .1.3.6.1.4.1.351.110.5.2.8.1.1.1.6
vrtlIntrCurrConfigPaths
This is not a configurable parameter.
This gives the count of paths currently configured on this
virtual interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.5.2.8.1.1.1.7

vrtlIntrCounterTable

table
.1.3.6.1.4.1.351.110.5.2.8.2.1 · 1 row entry · 13 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk vrtlIntrCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MGX82XX-VIRTUAL-PORT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MGX82XX-VIRTUAL-PORT-MIB::vrtlIntrCounterTable' 
Virtual Interface Counter32s Table.
vrtlIntrCounterEntry row .1.3.6.1.4.1.351.110.5.2.8.2.1.1
An entry in the Virtual Interface Counter32 Table.
Indexes
Column Syntax OID
countVrtlIntrNum
Virtual Interface Number.
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.351.110.5.2.8.2.1.1.1
vrtlIntrTotalCellCnt
Total number of cells (VC plus Qbin) that belong to
this Virtual Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.2.8.2.1.1.2
vrtlIntrTotalQbinCellCnt
Total number of cells in the Qbin belonging
to this Virtual Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.2.8.2.1.1.3
vrtlIntrRxdValidOAMCellCnt
Total number of OAM cell received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.2.8.2.1.1.4
vrtlIntrRxdRmCellCnt
Total number of RM cells Received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.2.8.2.1.1.5
vrtlIntrRxdClpUntaggedCellCnt
Total number of CLP-0 cells Received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.2.8.2.1.1.6
vrtlIntrRxdClpTaggedCellCnt
Total number of CLP-1 cells Received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.2.8.2.1.1.7
vrtlIntrRxdClpUntaggedDiscardedCellCnt
Total number of CLP-0 cells discarded at Ingress.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.2.8.2.1.1.8
vrtlIntrRxdClpTaggedDiscardedCellCnt
Total number of CLP-1 cells discarded at Ingress.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.2.8.2.1.1.9
vrtlIntrXmtdOAMCellCnt
Total number of OAM cells transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.2.8.2.1.1.10
vrtlIntrXmtdRmCellCnt
Total number of RM(Resource Monitoring)
cells transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.2.8.2.1.1.11
vrtlIntrXmtdClpUntaggedCellCnt
Total number of CLP-0 cells transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.2.8.2.1.1.12
vrtlIntrXmtdClpTaggedCellCnt
Total number of CLP-1 cells transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.2.8.2.1.1.13

vrtlIntrQbinConfigTable

table
.1.3.6.1.4.1.351.110.5.2.8.3.1 · 1 row entry · 11 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk vrtlIntrQbinConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MGX82XX-VIRTUAL-PORT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MGX82XX-VIRTUAL-PORT-MIB::vrtlIntrQbinConfigTable' 
Virtual Interface QBin Configuration Table.
vrtlIntrQbinConfigEntry row .1.3.6.1.4.1.351.110.5.2.8.3.1.1
An entry in the Virtual Interface Qbin Config Table.
Indexes
Column Syntax OID
queConfigVrtlIntrNum
Virtual Interface Number.
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.351.110.5.2.8.3.1.1.1
queConfigVrtlIntrQbinNum
Virtual Interface Qbin Number. There are totaly 16 Qbin
per Virtual Interface.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.351.110.5.2.8.3.1.1.2
vrtlIntrQbinState
Virtual Interface QBIN state.
Enumerationr/w
Enumerated Values:
1down
2up
 .1.3.6.1.4.1.351.110.5.2.8.3.1.1.3
vrtlIntrQbinPri
This indicates the priority of the QBIN service
within the Virtual Interface.
Integer32r/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.351.110.5.2.8.3.1.1.4
vrtlIntrQbinRate
The rate at which cells in the QBIN are serviced.
Max Cell rate for OC3 interface is 353208 cell/sec.
Integer32r/w
Constraints:
range: 0-353208
 .1.3.6.1.4.1.351.110.5.2.8.3.1.1.5
vrtlIntrQbinDiscardSelection
Virtual Interface QBin Congestion control option.
Enumerationr/w
Enumerated Values:
1clpHysteresis
3frameDiscard
 .1.3.6.1.4.1.351.110.5.2.8.3.1.1.6
vrtlIntrQbinMaxThreshold
Max cells that can be queued in the QBIN.
The Get value will be different from the Set
value because of FW internal round up.
Integer32r/w
Constraints:
range: 0-512000
 .1.3.6.1.4.1.351.110.5.2.8.3.1.1.7
vrtlIntrQbinClpHiThreshold
The threshold above which the tagged cells
will be dropped.
The Get value will be different from the Set
value because of FW internal round up.
Integer32r/w
Constraints:
range: 0-512000
 .1.3.6.1.4.1.351.110.5.2.8.3.1.1.8
vrtlIntrQbinClpLoThreshold
Valid only if congestion control is set to
CLP hysterises. The threshold upto which the
dropping of the tagged cells should continue once
it has crossed CLP HI threshold.
The Get value will be different from the Set …
Integer32r/w
Constraints:
range: 0-512000
 .1.3.6.1.4.1.351.110.5.2.8.3.1.1.9
vrtlIntrQbinFrameDiscardThreshold
Valid only if congestion control is set to
Frame Discard. It is the threshold after which
the QE will start discarding the entire frame
if one or more cells of the frame is discarded..
The Get value will be different…
Integer32r/w
Constraints:
range: 0-512000
 .1.3.6.1.4.1.351.110.5.2.8.3.1.1.10
vrtlIntrQbinEfciThreshold
The threshold above which the EFCI bits of
the cell is set.
The Get value will be different from the Set
value because of FW internal round up.
Integer32r/w
Constraints:
range: 0-512000
 .1.3.6.1.4.1.351.110.5.2.8.3.1.1.11

vrtlIntrQbinCounterTable

table
.1.3.6.1.4.1.351.110.5.2.8.4.1 · 1 row entry · 6 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk vrtlIntrQbinCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MGX82XX-VIRTUAL-PORT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MGX82XX-VIRTUAL-PORT-MIB::vrtlIntrQbinCounterTable' 
Virtual Interface QBin Counter Table.
vrtlIntrQbinCounterEntry row .1.3.6.1.4.1.351.110.5.2.8.4.1.1
An entry in the Virtual Interface Qbin Counter Table.
Each entry contains information on the statistics supported
for an interface.
Indexes
Column Syntax OID
queConuterVrtlIntrNum
Virtual Interface Number.
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.351.110.5.2.8.4.1.1.1
queCounterVrtlIntrQbinNum
Virtual Interface Qbin Number. There are totaly 16 Qbin
per Virtual Interface.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.351.110.5.2.8.4.1.1.2
vrtlIntrQbinCurrentCellCnt
Total number of cells currently in the Qbin.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.2.8.4.1.1.3
vrtlIntrQbinRxdCellCnt
Total number of cells arrived to the QBIN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.2.8.4.1.1.4
vrtlIntrQbinTxdCellCnt
Total number of cells departured from QBIN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.2.8.4.1.1.5
vrtlIntrQbinDiscardedCellCnt
Total number of arrivals to QBIN which were discarded.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.2.8.4.1.1.6