CISCO-MGX82XX-RPM-SUBIF-MIB
This MIB is used to provision backplane sub-interfaces
on the MGX's Route Processor Module (RPM). This MIB is
implemented on the MGX controller to manage the RPM. The RPM
family of Router Modules run the IOS Operating System
- Source file
CISCO-MGX82XX-RPM-SUBIF-MIB- Last revised
- Identity
ciscoMgx82xxRpmSubIfMIB- Base OID
1.3.6.1.4.1.351.150.60
Imported Objects
| BASIS-MIB | rpmPort |
| CISCOWAN-SMI | ciscoWan |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-MGX82XX-RPM-SUBIF-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-MGX82XX-RPM-SUBIF-MIB::ciscoMgx82xxRpmSubIfMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MGX82XX-RPM-SUBIF-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MGX82XX-RPM-SUBIF-MIB::ciscoMgx82xxRpmSubIfMIB'
Objects (13)
Showing 13 of 13 objects
Object legend
Table
Row
Column
Scalar
Node
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.351.110.5.2.9.1.1 |
||
.1.3.6.1.4.1.351.110.5.2.9.1.1.1 |
||
|
Integer32
|
.1.3.6.1.4.1.351.110.5.2.9.1.1.1.1 |
|
|
Integer32
|
.1.3.6.1.4.1.351.110.5.2.9.1.1.1.2 |
|
|
Integer32
|
.1.3.6.1.4.1.351.110.5.2.9.1.1.1.3 |
|
|
Enumeration
|
.1.3.6.1.4.1.351.110.5.2.9.1.1.1.4 |
|
.1.3.6.1.4.1.351.110.5.2.9.1.1.1.5 |
||
.1.3.6.1.4.1.351.110.5.2.9.1.1.1.6 |
||
|
Enumeration
|
.1.3.6.1.4.1.351.110.5.2.9.1.1.1.7 |
|
.1.3.6.1.4.1.351.150.60 |
||
.1.3.6.1.4.1.351.150.60.2 |
||
.1.3.6.1.4.1.351.150.60.2.1 |
||
.1.3.6.1.4.1.351.150.60.2.2 |
Dependencies (4) 4 direct Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CISCOWAN-SMIcisco
- BASIS-MIBcisco
- SNMPv2-CONFrfc
- CISCO-MGX82XX-RPM-SUBIF-MIBciscoselected
Conformance Groups (1)
|
rpmPortSlotNum rpmPortInterface rpmPortSubInterface rpmPortRowStatus rpmPortIpAddress rpmPortSubNetMask rpmPortState
Objects related to ATM Subinterface in RPM module.
|
.1.3.6.1.4.1.351.150.60.2.2.1
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.351.150.60.2.1.1The compliance statement for the Cisco
MGX RPM sub-interface MIB.
MGX RPM sub-interface MIB.
Required groups
| mandatory | cmrSubIfMIBGroup |