CISCO-MGX82XX-ENVMON-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
9
asmAlarmTable
table
.1.3.6.1.4.1.351.110.1.2.1
·
1 row entry
·
9 columns
Uses the cisco variant from
Command help
/opt/observium/mibs/cisco.
Walk asmAlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MGX82XX-ENVMON-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MGX82XX-ENVMON-MIB::asmAlarmTable'
The ASM Alarm table. The table size is given by the value of ASMNumOfValidEntries.
An entry in the Basis ASM Alarm Table.
Indexes
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
This object is the identifier of a ASM alarm
entry. The Alarm is further identified by the objects ASMAlarmType & ASMAlarmUnitNum. |
Integer32 Constraints: range: 1-100 |
.1.3.6.1.4.1.351.110.1.2.1.1.1 |
||||||||||
|
The value for this object indicates the type
of device for which alarm is applicable. The possible values are : alarmOther (1) : Other than specified below alarmTemperature(2) : Temp… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.351.110.1.2.1.1.2 |
||||||||||
|
This object identifies one unit among a number of
identical units represented in this table having the same asmAlarmType. |
Integer32 Constraints: range: 1-16 |
.1.3.6.1.4.1.351.110.1.2.1.1.3 |
||||||||||
|
This object specifies the threshold beyond which
the alarmable unit is said to be in an abnormal state. |
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.351.110.1.2.1.1.4 |
||||||||||
|
This variable specifies the severity of the alarm
to be declared when the asmAlarmThreshold specified is exceeded. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.351.110.1.2.1.1.5 |
||||||||||
|
This object indicates if the alarm unit is measurable
by the switch/system. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.351.110.1.2.1.1.6 |
||||||||||
|
This object gives the measured value of the entity
addressed by asmAlarmNum. The value in this object is valid only if asmUnitMeasurable is set to 'yes'. This object contains value zero for asmUnitMeasurable value of 'n… |
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.351.110.1.2.1.1.7 |
||||||||||
|
This object indicates the status of the ASM alarm
represented in this entry. It is a bitmap where a set bit indicates an abnormal condition. A reset bit signifies normal operation. |
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.351.110.1.2.1.1.8 |
||||||||||
|
This object when set to asmAlarmClear(2),causes the
alarm to be cleared. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.351.110.1.2.1.1.9 |
