Standard view Table view

CISCO-MAC-AUTH-BYPASS-MIB

        MIB module for monitoring and configuring MAC
Authentication Bypass (MAB) feature in the system.
        
MAC Auth Bypass feature provides controlled access
to devices based on their MAC addresses.
        
MAB allows non-dot1x compliant end devices controlled
access to network and also provides a replacement
technology for VLAN Management Policy Server (VMPS)
environments.
        
MAB is also an intergal part of the Network Access
Control (NAC) program which enables network access for
the clients and subsequently carry out a posture
assessment of these clients.
        
MAC Authentication Bypass feature provides a mechanism
that uses the MAC address of the connecting device to
grant or deny network access for it.
Source file
CISCO-MAC-AUTH-BYPASS-MIB
Last revised
Identity
ciscoMabMIB
Base OID
1.3.6.1.4.1.9.9.654
Imported Objects
CISCO-SMI ciscoMgmt
IF-MIB ifIndex
SNMPv2-CONF MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMI MODULE-IDENTITY OBJECT-TYPE
SNMPv2-TC MacAddress TruthValue
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-MAC-AUTH-BYPASS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-MAC-AUTH-BYPASS-MIB::ciscoMabMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-MAC-AUTH-BYPASS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-MAC-AUTH-BYPASS-MIB::ciscoMabMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (18)
ciscoMabMIB
.1.3.6.1.4.1.9.9.654
cmabNotification
.1.3.6.1.4.1.9.9.654.0
cmabMIBObjects
.1.3.6.1.4.1.9.9.654.1
cmabInterfaceConfig
.1.3.6.1.4.1.9.9.654.1.1
cmabIfConfigTable
.1.3.6.1.4.1.9.9.654.1.1.1
cmabIfConfigEntry
IF-MIBifIndex
 .1.3.6.1.4.1.9.9.654.1.1.1.1
cmabIfAuthEnabled r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.654.1.1.1.1.1
cmabIfAuthMethod r/w
Enumeration
 .1.3.6.1.4.1.9.9.654.1.1.1.1.2
cmabSession
.1.3.6.1.4.1.9.9.654.1.2
cmabClientInfoTable
.1.3.6.1.4.1.9.9.654.1.2.1
cmabClientInfoEntry
IF-MIBifIndexcmabClientSessionId
 .1.3.6.1.4.1.9.9.654.1.2.1.1
cmabClientSessionId
OctetString
 .1.3.6.1.4.1.9.9.654.1.2.1.1.1
cmabClientMacAddress
SNMPv2-TCMacAddress
 .1.3.6.1.4.1.9.9.654.1.2.1.1.2
cmabClientMabState
Enumeration
 .1.3.6.1.4.1.9.9.654.1.2.1.1.3
cmabClientAuthStatus
Enumeration
 .1.3.6.1.4.1.9.9.654.1.2.1.1.4
cmabMIBConformance
.1.3.6.1.4.1.9.9.654.2
cmabMIBCompliances
.1.3.6.1.4.1.9.9.654.2.1
cmabMIBGroups
.1.3.6.1.4.1.9.9.654.2.2
Dependencies (7) 5 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCO-SMIcisco
  3. SNMPv2-TCrfc
  4. IANAifType-MIBrfc
  5. SNMPv2-CONFrfc
  6. SNMPv2-MIBrfc
  7. IF-MIBrfc
  8. CISCO-MAC-AUTH-BYPASS-MIBciscoselected
Conformance Groups (2)
cmabIfConfigGroup
cmabIfAuthEnabled cmabIfAuthMethod
A collection of objects that provides per interface
configuration of MAC Authentication Bypass feature.
 .1.3.6.1.4.1.9.9.654.2.2.1
cmabClientInfoGroup
cmabClientMacAddress cmabClientMabState cmabClientAuthStatus
A collection of objects that provides information of
MAC Authentication Bypass sessions in the devices.
 .1.3.6.1.4.1.9.9.654.2.2.2
Compliance Statements (1)

OID .1.3.6.1.4.1.9.9.654.2.1.1
The compliance statement for entities which implement
CISCO-MAB-MIB.
Required groups
mandatory cmabIfConfigGroup
mandatory cmabClientInfoGroup
Object refinements
ObjectAccessSyntaxDescription
cmabIfAuthEnabled readonly
Write access is not required.
cmabIfAuthMethod readonly
Write access is not required.