CISCO-LWAPP-TSM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
29

cLTsmDot11ClientTable

table
.1.3.6.1.4.1.9.9.525.1.2.1 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cLTsmDot11ClientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-TSM-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-TSM-MIB::cLTsmDot11ClientTable' 
This table lists those clients for which TSM statistics
are collected by the controller from the respective
APs associated with the controller.
          
A row is added to this table when an AP sends TSM
statistics corresponding to a wireless client
associated to it through one of its dot11 interfaces
identified by cLApSysMacAddress and cLApDot11IfSlotId.
          
The maximum number of entries per radio interface is
given by cLTsmDot11MaxClientsPerDot11Intf.  The
oldest entry is deleted when the number of entries
is to exceed the limit indicated by
cLTsmDot11MaxClientsPerDot11Intf.
cLTsmDot11ClientEntry row .1.3.6.1.4.1.9.9.525.1.2.1.1
Each entry represents a conceptual row in
cLTsmDot11ClientTable and uniquely identified by
cLApSysMacAddress, cLApDot11IfSlotId and
cLTsmDot11ClientIndex.
Indexes
Column Syntax OID
cLTsmDot11ClientIndex
This object uniquely identifies one client associated
to the AP through the dot11 interface identified by
cLApSysMacAddress and cLApDot11IfSlotId.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.525.1.2.1.1.1
cLTsmDot11ClientMacAddress
This object indicates the MAC address of the
wireless client for which TSM statistics are
collected.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.9.9.525.1.2.1.1.2

cLTsmDot11UplinkTable

table
.1.3.6.1.4.1.9.9.525.1.2.2 · 1 row entry · 12 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cLTsmDot11UplinkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-TSM-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-TSM-MIB::cLTsmDot11UplinkTable' 
This table represents the statistics received by the
controller from the associated APs, on the uplink 
traffic ( traffic from the 802.11 wireless client to 
the AP ) observed on the dot11 interfaces of the 
respective APs.
          
For example, suppose a client with address 
12:3f:73:99:de:5b connects to the 802.11 radio 
interface, 13:13:43:de:bb:ff of an AP at 18:30:00 hours.
          
Assuming that cLTsmDot11aConfig (or cLTsmDot11bConfig) 
is set to 'true' for the respective type of interface, 
every 90 seconds, AP sends the controller statistical
data for the client 12:3f:73:99:de:5b associated at the
interface 13:13:43:de:bb:ff.
          
So, after 3 minutes, i.e., 180 seconds, controller would 
have received statistics for the particular client and 
AP combination twice leading to two rows in this table
as follows.
          
1> Client: 12:3f:73:99:de:5b  
             Interface:13:13:43:de:bb:ff  Time: 18:33:00 
          
2> Client: 12:3f:73:99:de:5b  
             Interface:13:13:43:de:bb:ff  Time: 18:31:30 
          
Now assume that, at 18:33:00, the client moves and 
associates with another AP associated to the same
controller, at the AP's 802.11 interface 
14:14:43:de:dd:ee.
          
After 3 minutes, i.e., 180 seconds (say), controller 
would have again received statistics from the AP, for
the particular client and new AP combination twice
leading to two new rows in this table.
          
At this point, this table will have entries with 
following references :
          
1> Client: 12:3f:73:99:de:5b  
           Interface:14:14:43:de:dd:ee  Time: 18:36:00 
          
2> Client: 12:3f:73:99:de:5b  
           Interface:14:14:43:de:dd:ee  Time: 18:34:30
          
3> Client: 12:3f:73:99:de:5b  
           Interface:13:13:43:de:bb:ff  Time: 18:33:00 
          
4> Client: 12:3f:73:99:de:5b  
           Interface:13:13:43:de:bb:ff  Time: 18:31:30
          
The maximum number of entries in this table is
indicated by cLTsmDot11MaxTsmStatsEntries.  When
the specified limit of entries is reached the oldest
entries will be removed to make room for new entries.
However, the controller may remove the entries if it
encounters memory shortage.
cLTsmDot11UplinkEntry row .1.3.6.1.4.1.9.9.525.1.2.2.1
Each entry represents a conceptual row in this table
and corresponds to the uplink TSM statistics received
from an AP, in a 90 second window
(cLTsmDot11UplinkTimeStamp), for a mobile-station
/client (cLClientMacAddress)…
Indexes
Column Syntax OID
cLTsmDot11UplinkApMacAddress
This object represents the radio MAC address of the AP
with which this client was associated when these
statistics were observed.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.9.9.525.1.2.2.1.1
cLTsmDot11UplinkApIfSlotId
This object represents a slot number and uniquely
identifies the dot11 interface of the AP along with
cLTsmDot11UplinkApMacAddress with which the
client indicated by cLTsmDot11ClientMacAddress
was associated when these …
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.9.9.525.1.2.2.1.2
cLTsmDot11UplinkTimeStamp
This object indicates the value of sysUpTime at which
these statistics were received from the AP. This
represents number of seconds elapsed since 00:00:00 on
January 1, 1970, Coordinated Universal Time (UTC). So
a …
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.9.525.1.2.2.1.3
cLTsmDot11UplinkAvgPktQDelay
The average packet queue delay in the upstream
direction.
hundredths-secondsSNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
 .1.3.6.1.4.1.9.9.525.1.2.2.1.4
cLTsmDot11UplinkLt10Packets
The number of packets transmitted by the client and
received by the AP that experienced a delay of less
than 10 ms.
packetsCISCO-LWAPP-TC-MIBCLTsmDot11CurrentPackets .1.3.6.1.4.1.9.9.525.1.2.2.1.5
cLTsmDot11UplinkPktGt10Lt20Packets
The number of packets transmitted by the client and
received by the AP that experienced a delay greater
than or equal to 10 ms and less than 20 ms.
packetsCISCO-LWAPP-TC-MIBCLTsmDot11CurrentPackets .1.3.6.1.4.1.9.9.525.1.2.2.1.6
cLTsmDot11UplinkPktGt20Lt40Packets
The number of packets transmitted by the client and
received by the AP that experienced a delay greater
than or equal to 20 ms and less than 40 ms.
packetsCISCO-LWAPP-TC-MIBCLTsmDot11CurrentPackets .1.3.6.1.4.1.9.9.525.1.2.2.1.7
cLTsmDot11UplinkPktGt40Packets
The number of packets transmitted by the client and
received by the AP that experienced a delay greater
than 40 ms.
packetsCISCO-LWAPP-TC-MIBCLTsmDot11CurrentPackets .1.3.6.1.4.1.9.9.525.1.2.2.1.8
cLTsmDot11UplinkLostPackets
This object indicates the number of lost upstream
packets in the specified interval.
packetsCISCO-LWAPP-TC-MIBCLTsmDot11CurrentPackets .1.3.6.1.4.1.9.9.525.1.2.2.1.9
cLTsmDot11UplinkTotalPackets
The number of upstream packets received in the
specified interval.
packetsCISCO-LWAPP-TC-MIBCLTsmDot11CurrentPackets .1.3.6.1.4.1.9.9.525.1.2.2.1.10
cLTsmDot11UplinkRoamingPackets
The number of packets exchanged for roaming
negotiations in the specified interval.
packetsCISCO-LWAPP-TC-MIBCLTsmDot11CurrentPackets .1.3.6.1.4.1.9.9.525.1.2.2.1.11
cLTsmDot11UplinkRoamingDelay
The average roaming delay observed in the
specified interval.
hundredths-secondsSNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
 .1.3.6.1.4.1.9.9.525.1.2.2.1.12

cLTsmDot11DnlinkTable

table
.1.3.6.1.4.1.9.9.525.1.2.3 · 1 row entry · 10 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cLTsmDot11DnlinkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-TSM-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-TSM-MIB::cLTsmDot11DnlinkTable' 
This table represents the statistics received by the
controller from the associated APs, on the downlink
traffic ( traffic from the AP to the 802.11 wireless
client ) observed on the dot11 interfaces of the 
respective APs.
          
For example, suppose a client with address 
12:3f:73:99:de:5b connects to the 802.11 radio 
interface, 13:13:43:de:bb:ff of an AP at 18:30:00 hours.
          
Assuming that cLTsmDot11aConfig (or cLTsmDot11bConfig) 
is set to 'true' for the respective type of interface, 
every 90 seconds, the AP sends the controller
statistical data about the 12:3f:73:99:de:5b associated
at the interface 13:13:43:de:bb:ff.
          
So, after 3 minutes, i.e., 180 seconds, controller would 
have received statistics from the AP for the particular
client and AP combination twice leading to two rows in
this table as follows.
          
1> Client: 12:3f:73:99:de:5b  
             Interface:13:13:43:de:bb:ff  Time: 18:33:00 
          
2> Client: 12:3f:73:99:de:5b  
             Interface:13:13:43:de:bb:ff  Time: 18:31:30 
          
Now assume that, at 18:33:00, the client moves and 
associates with another AP associated to the same
controller, at the AP's 802.11 interface 
14:14:43:de:dd:ee.
          
After 3 minutes, i.e., 180 seconds (say), controller 
would have again collected statistics for the particular 
client and new AP combination twice leading to two new 
rows in this table.
          
At this point, this table will have entries as
follows.
          
1> Client: 12:3f:73:99:de:5b  
           Interface:14:14:43:de:dd:ee  Time: 18:36:00 
          
2> Client: 12:3f:73:99:de:5b  
           Interface:14:14:43:de:dd:ee  Time: 18:34:30
          
3> Client: 12:3f:73:99:de:5b  
           Interface:13:13:43:de:bb:ff  Time: 18:33:00 
          
4> Client: 12:3f:73:99:de:5b  
           Interface:13:13:43:de:bb:ff  Time: 18:31:30
          
The maximum number of entries in this table is
indicated by cLTsmDot11MaxTsmStatsEntries.  When
the specified limit of entries is reached the oldest
entries will be removed to make room for new entries.
However, the controller may remove the entries if it
encounters memory shortage.
cLTsmDot11DnlinkEntry row .1.3.6.1.4.1.9.9.525.1.2.3.1
Each entry represents a conceptual row in this table
and corresponds to the downlink TSM statistics received
by the controller from an AP in a 90 second
window (cLTsmDot11DnlinkTimeStamp), for a
mobile-station/client a…
Indexes
Column Syntax OID
cLTsmDot11DnlinkApMacAddress
This object represents the radio MAC address of the AP
with which this client was associated when these
statistics were observed.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.9.9.525.1.2.3.1.1
cLTsmDot11DnlinkApIfSlotId
This object represents a slot number and uniquely
identifies the dot11 interface of the AP along with
cLTsmDot11DnlinkApMacAddress with which the
client indicated by cLTsmDot11ClientMacAddress
was associated when these …
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.9.9.525.1.2.3.1.2
cLTsmDot11DnlinkTimeStamp
This object indicates the value of sysUpTime at which
these statistics were received from the AP. This
represents number of seconds elapsed since 00:00:00 on
January 1, 1970, Coordinated Universal Time (UTC). So
a …
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.9.525.1.2.3.1.3
cLTsmDot11DnlinkAvgPktQDelay
The average packet queue delay in the downstream
direction.
hundredths-secondsSNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
 .1.3.6.1.4.1.9.9.525.1.2.3.1.4
cLTsmDot11DnlinkLt10Packets
The number of packets transmitted by the AP and
received by the client that experienced a delay of
less than 10 ms.
packetsCISCO-LWAPP-TC-MIBCLTsmDot11CurrentPackets .1.3.6.1.4.1.9.9.525.1.2.3.1.5
cLTsmDot11DnlinkPktGt10Lt20Packets
The number of packets transmitted by the AP and
received by the client that experienced a delay greater
than or equal to 10 ms and less than 20 ms.
packetsCISCO-LWAPP-TC-MIBCLTsmDot11CurrentPackets .1.3.6.1.4.1.9.9.525.1.2.3.1.6
cLTsmDot11DnlinkPktGt20Lt40Packets
The number of packets transmitted by the AP and
received by the client that experienced a delay greater
than or equal to 20 ms and less than 40 ms.
packetsCISCO-LWAPP-TC-MIBCLTsmDot11CurrentPackets .1.3.6.1.4.1.9.9.525.1.2.3.1.7
cLTsmDot11DnlinkPktGt40Packets
The number of packets transmitted by the AP and
received by the client that experienced a delay greater
than 40 ms.
packetsCISCO-LWAPP-TC-MIBCLTsmDot11CurrentPackets .1.3.6.1.4.1.9.9.525.1.2.3.1.8
cLTsmDot11DnlinkLostPackets
This object indicates the number of lost downstream
packets in the specified interval.
packetsCISCO-LWAPP-TC-MIBCLTsmDot11CurrentPackets .1.3.6.1.4.1.9.9.525.1.2.3.1.9
cLTsmDot11DnlinkTotalPackets
The number of downstream packets received in the
specified interval.
packetsCISCO-LWAPP-TC-MIBCLTsmDot11CurrentPackets .1.3.6.1.4.1.9.9.525.1.2.3.1.10

cLTsmDot11CUTable

table
.1.3.6.1.4.1.9.9.525.1.2.4 · 1 row entry · 5 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cLTsmDot11CUTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-TSM-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-TSM-MIB::cLTsmDot11CUTable' 
This table represents Channel Utilization statistics
received by the Controller from associated APs observed
on the dot11 radio interfaces of the respective APs.
A row is added to this table when an AP sends Channel
Utilization metrics corresponding to its dot11
radio interfaces.
The maximum number of entries per radio interface is
represented by cLTsmDot11MaxTsmStatsEntries.
The oldest entry is deleted when the number of entries
exceeds the limit indicated by cLTsmDot11MaxTsmStatsEntries.
cLTsmDot11CUEntry row .1.3.6.1.4.1.9.9.525.1.2.4.1
Each entry represents a conceptual row in
cLTsmDot11CUTable and uniquely identified by
cLApSysMacAddress, cLApDot11IfSlotId and
cLTsmDot11CUTimeStamp.
Indexes
Column Syntax OID
cLTsmDot11CUTimeStamp
This object indicates the value of sysUpTime at which
these statistics were received from the AP. This
represents number of seconds elapsed since 00:00:00 on
January 1, 1970, Coordinated Universal Time (UTC). So
a val…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.9.525.1.2.4.1.1
cLTsmDot11CUFiftyPercentilePicc
This object represents the 50th percentile of Picc.
Picc represents the percentage of time consumed by
the AP for receiving frames on a particular radio
interface from co-channel APs & clients.
percentUnsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.9.9.525.1.2.4.1.2
cLTsmDot11CUNinetyPercentilePicc
This object represents the 90th percentile of Picc.
Picc represents the percentage of time consumed by
the AP for receiving frames on a particular radio
interface from co-channel APs & clients.
percentUnsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.9.9.525.1.2.4.1.3
cLTsmDot11CUFiftyPercentilePib
This object represents the 50th percentile of Pib.
Pib represents the percentage of time consumed by
the AP for receiving frames on a particular radio
interface which cannot be correctly de-modulated.
percentUnsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.9.9.525.1.2.4.1.4
cLTsmDot11CUNinetyPercentilePib
This object represents the 90th percentile of Pib.
Pib represents the percentage of time consumed by
the AP for receiving frames on a particular radio
interface which cannot be correctly de-modulated.
percentUnsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.9.9.525.1.2.4.1.5