CISCO-LWAPP-MFP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
9

cLMfpWlanConfigTable

table
.1.3.6.1.4.1.9.9.518.2.1.2 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cLMfpWlanConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-MFP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-MFP-MIB::cLMfpWlanConfigTable' 
This table represents the configuration needed by the
controller to enable management frame protection on a
particular WLAN.
          
A controller, when configured, enables the MFP on
individual WLANs.  When these WLANs that have MFP
enabled are applied to the APs, the APs become part
of the MFP framework.  The APs will receive the
signature keys to be used to generate MICs for
unicast and broadcast management frames upon joining
the controller.  With these keys, the APs generate
the MIC for individual management frames and append
the value as an information element to the
respective frames.
          
The creation of a new row in cLWlanConfigTable
through an explicit network management action 
results in creation of an entry in this table.
Similarly, deletion of a row in 
cLWlanConfigTable through user action causes the
deletion of corresponding row in this table.
cLMfpWlanConfigEntry row .1.3.6.1.4.1.9.9.518.2.1.2.1
A conceptual row in cLMfpWlanConfigTable and
represents the MFP configuration on a particular
WLAN.
Indexes
Column Syntax OID
cLMfpVersionRequired
This object specifies the version of the management
frame protection protocol required for the MFP framework
when the MFP protection is enabled through the
cLMfpProtectionEnable object.
CISCO-LWAPP-TC-MIBCLMfpVersionr/w
Type Values:
1mfpv1
2mfpv2
 .1.3.6.1.4.1.9.9.518.2.1.2.1.2
cLMfpProtectionEnabledeprecated
This object specifies whether the MFP protection
on this WLAN be enabled or not.

A value of 'true' enables management frame
protection on the WLAN and 'false' disables
management frame protection.
…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.518.2.1.2.1.3
cLMfpClientProtection
This object specifies the level of client MFP
protection for this WLAN.
A value of 'disabled' specifies client protection
is disabled.
A value of 'enabled' specifies client protection
is optional.
A value of 'requir…
Enumerationr/w
Enumerated Values:
1disabled
2enabled
3required
 .1.3.6.1.4.1.9.9.518.2.1.2.1.4

cLMfpApParamTable

table
.1.3.6.1.4.1.9.9.518.2.2.2 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cLMfpApParamTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-MFP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-MFP-MIB::cLMfpApParamTable' 
This table represents the configuration of MFP related
parameters corresponding to a particular AP.
          
A row is added to the table by the agent when a
a row is added to cLApTable of CISCO-LWAPP-AP-MIB.
Similarly, a row is deleted from this table when
the corresponding row is deleted from cLApTable.
cLMfpApParamEntry row .1.3.6.1.4.1.9.9.518.2.2.2.1
This object represents a conceptual row in this table
and represents the MFP parameters of a particular AP.
Indexes
Column Syntax OID
cLMfpApMfpValidationEnable
This object specifies whether the AP should
validate the management frames received by it
in accordance with the MFP version or not.

A value of 'true' indicates that the AP should
validate all the receive…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.518.2.2.2.1.1
cLMfpApMfpValidationActual
This object indicates the status of MFP validation
being done as reported by the AP in response to the
controller's request to perform MFP validation.

A value of 'true' indicates that all the management
f…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.518.2.2.2.1.2

cLMfpApIfSmtCapTable

table deprecated
.1.3.6.1.4.1.9.9.518.2.2.3 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cLMfpApIfSmtCapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-MFP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-MFP-MIB::cLMfpApIfSmtCapTable' 
This table represents the MFP capabilities on a dot11
radio interface of an AP that has joined this
controller.
          
An AP performs the role of protecting and validating 
management frames on its dot11 interfaces.  It
protects the management frames transmitted out on a
dot11 interface when the signature protection
capability is enabled on that interface through
the object cLMfpApIfMfpProtectionCapability.
Similarly, it validates all the management frames
received on a dot11 interface when MFP validation
capability is enabled on the AP.
          
A row is added to the table by the agent
corresponding to each dot11 interface of an AP,
when it adds the row(s) to cLApIfSmtParamTable
of CISCO-LWAPP-AP-MIB.  The agent deletes 
the row(s) when it deletes the corresponding
rows from cLApIfSmtParamTable.
cLMfpApIfSmtCapEntry row .1.3.6.1.4.1.9.9.518.2.2.3.1
This object represents a conceptual row in this table
and represents the MFP capabilities on the dot11 interface
of a particular LWAPP AP.
Indexes
Column Syntax OID
cLMfpApIfMfpVersionSupporteddeprecated
This object represents the version of the MFP
protocol currently supported by this radio
interface.
CISCO-LWAPP-TC-MIBCLMfpVersion
Type Values:
1mfpv1
2mfpv2
 .1.3.6.1.4.1.9.9.518.2.2.3.1.1
cLMfpApIfMfpProtectionCapabilitydeprecated
This object represents the management frame
protection capability urrently exhibited by the
dot11 interface.

A value of 'protectCapNone' represents protection
is not supported on this dot11 interface.
…
Enumeration
Enumerated Values:
1protectCapNone
2protectCapNoBeacon
3protectCapAllFrames
 .1.3.6.1.4.1.9.9.518.2.2.3.1.2
cLMfpApIfMfpValidationCapabilitydeprecated
This object represents the management frame validation
capability currently exhibited by this dot11 interface.

A value of 'validateCapNone' represents the MFP validation
is not done by this dot11 interfac…
Enumeration
Enumerated Values:
1validateCapNone
2validateCapAllFrames
 .1.3.6.1.4.1.9.9.518.2.2.3.1.3

cLMfpClientTable

table
.1.3.6.1.4.1.9.9.518.2.2.5 · 1 row entry · 1 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cLMfpClientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-MFP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-MFP-MIB::cLMfpClientTable' 
This table represents the MFP information for 802.11
wireless clients that are associated with the APs 
that have joined this controller.
cLMfpClientEntry row .1.3.6.1.4.1.9.9.518.2.2.5.1
Each entry represents a conceptual row in this
table and provides MFP information about the
clients associated to the APs that have joined
the controller.
Indexes
Column Syntax OID
cLMfpClientMfpEnabled
This object indicates whether MFP protection is
enabled for a particular client. A value of 'true'
indicates that MFP protection is enabled. A value
of 'false' indicates MFP protection is disabled.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.518.2.2.5.1.1