CISCO-LWAPP-EXT-MIB Table View

This table contains the entries for physical port related status

clExtPortModeConfigEntry row .1.3.6.1.4.1.9.9.9998.1.1.1.5.1

This entry contains the Switch's physical port phyical mode related attribues

Indexes

CISCO-LWAPP-SYS-MIBclsPortDot1dBasePort

Column	Syntax	OID
clExtPortOperStatus The switch's Port Operation Status.This is the current actual status.	Enumeration Enumerated Values: 1 up 2 down 3 testing 4 admindown	.1.3.6.1.4.1.9.9.9998.1.1.1.5.1.1

A list of interface entries.  The number of entries
is given by the value of ifNumber.

clExtIfEntry row .1.3.6.1.4.1.9.9.9998.1.1.2.1.1

An entry containing management information applicable
to a particular interface.

Indexes

IF-MIBifIndex

Column	Syntax	OID
clExtIfSpeed An estimate of the interface's current bandwidth in million bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal b…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.9998.1.1.2.1.1.1
clExtIfSinceLastChange The value of time duration since the time the interface entered its current operational state. If the current time is prior to the last updating of the local network management subsystem, then this object contains a ze…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.9998.1.1.2.1.1.2

This table represents the information about the
802.11 LWAPP Access Points that have joined the
controller.
          
LWAPP APs exchange configuration messages with the
controller and get the required configuration for
their 802.11 related operations, after they join the
controller.

clExtApEntry row .1.3.6.1.4.1.9.9.9998.1.1.3.1.1

Each entry in this table provides information about
one 802.11 LWAPP Access Point that has joined the
controller.

Entries are removed when the APs lose their
association with the controller due to loss
of c…

Indexes

CISCO-LWAPP-AP-MIBcLApSysMacAddress

Column	Syntax	OID
clExtApRealTimeStatsModeEnabled This object specifies whether currently stats mode is 'realtime'. There are two stats-mode, realtime and normal, that specifies the stats-timer range to be 10-180 sec and 2-5 sec each. Set to on if current mode is realt…	CLSwitchr/w Type Values: 0 off 1 on	.1.3.6.1.4.1.9.9.9998.1.1.3.1.1.1
clExtApMonitorMode This object specifies the monitor mode of AP. monitor : no client can connect. normal : no monitor function at all. semimonitor : AP can monitor it's working radio while clients connected. The mapping between clExtApM…	Enumerationr/w Enumerated Values: 0 normal 1 monitor 2 semimonitor	.1.3.6.1.4.1.9.9.9998.1.1.3.1.1.2
clExtApSysManufacture This object specifies the AP manufacture.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.9998.1.1.3.1.1.3
clExtApSysSoftwareName This object specifies the AP software name.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.9998.1.1.3.1.1.4
clExtApSysSoftwareVersion This object specifies the AP software version.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.9998.1.1.3.1.1.5
clExtApSysSoftwareVendor This object specifies the AP software vendor.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.9998.1.1.3.1.1.6
clExtApQosMinBandwidth This object specifies the minimum bandwidth for QOS on the AP. It is measured by Mbps.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.9.9998.1.1.3.1.1.7
clExtApTotalPhyInterfaceCount This object specifies the total wired physical interface count for the Access Points that have joined the controller.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.9998.1.1.3.1.1.8
clExtApName This object represents the administrative name assigned to the AP by the user. If an AP is not configured, its factory default name will be ap:<last three byte of MACAddress> eg. ap:af:12:be.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.9998.1.1.3.1.1.9

This table represents the information about the
basic functional parameters corresponding to
the dot11 interfaces of the APs that have joined
the controller.

clExtApDot11IfEntry row .1.3.6.1.4.1.9.9.9998.1.1.3.2.1

An entry in this table represents the 802.11
functional parameters of the dot11 interface of
an AP that has joined the controller.

Entries are added when the APs associate to this
controller and deleted whe…

Indexes

CISCO-LWAPP-AP-MIBcLApSysMacAddress CISCO-LWAPP-AP-MIBcLApDot11IfSlotId

Column	Syntax	OID
clExtAp11nChannelBandwidth This object indicates the channel bandwidth for this AP. This applies to 802.11n networks only.	mhzEnumerationr/w Enumerated Values: 1 forty 2 twenty	.1.3.6.1.4.1.9.9.9998.1.1.3.2.1.1
clExtApDot11IfIANAType This object represents the type of this interface. The value of the type is defined by IANA.	IANAifType-MIBIANAifType Type Values: 1 other 2 regular1822 3 hdh1822 4 ddnX25 5 rfc877x25 6 ethernetCsmacd 7 iso88023Csmacd 8 iso88024TokenBus 9 iso88025TokenRing 10 iso88026Man 11 starLan 12 proteon10Mbit 13 proteon80Mbit 14 hyperchannel 15 fddi 16 lapb 17 sdlc 18 ds1 19 e1 20 basicISDN 21 primaryISDN 22 propPointToPointSerial 23 ppp 24 softwareLoopback 25 eon 26 ethernet3Mbit 27 nsip 28 slip 29 ultra 30 ds3 31 sip 32 frameRelay 33 rs232 34 para 35 arcnet 36 arcnetPlus 37 atm 38 miox25 39 sonet 40 x25ple 41 iso88022llc 42 localTalk 43 smdsDxi 44 frameRelayService 45 v35 46 hssi 47 hippi 48 modem 49 aal5 50 sonetPath 51 sonetVT 52 smdsIcip 53 propVirtual 54 propMultiplexor 55 ieee80212 56 fibreChannel 57 hippiInterface 58 frameRelayInterconnect 59 aflane8023 60 aflane8025 61 cctEmul 62 fastEther 63 isdn 64 v11 65 v36 66 g703at64k 67 g703at2mb 68 qllc 69 fastEtherFX 70 channel 71 ieee80211 72 ibm370parChan 73 escon 74 dlsw 75 isdns 76 isdnu 77 lapd 78 ipSwitch 79 rsrb 80 atmLogical 81 ds0 82 ds0Bundle 83 bsc 84 async 85 cnr 86 iso88025Dtr 87 eplrs 88 arap 89 propCnls 90 hostPad 91 termPad 92 frameRelayMPI 93 x213 94 adsl 95 radsl 96 sdsl 97 vdsl 98 iso88025CRFPInt 99 myrinet 100 voiceEM 101 voiceFXO 102 voiceFXS 103 voiceEncap 104 voiceOverIp 105 atmDxi 106 atmFuni 107 atmIma 108 pppMultilinkBundle 109 ipOverCdlc 110 ipOverClaw 111 stackToStack 112 virtualIpAddress 113 mpc 114 ipOverAtm 115 iso88025Fiber 116 tdlc 117 gigabitEthernet 118 hdlc 119 lapf 120 v37 121 x25mlp 122 x25huntGroup 123 transpHdlc 124 interleave 125 fast 126 ip 127 docsCableMaclayer 128 docsCableDownstream 129 docsCableUpstream 130 a12MppSwitch 131 tunnel 132 coffee 133 ces 134 atmSubInterface 135 l2vlan 136 l3ipvlan 137 l3ipxvlan 138 digitalPowerline 139 mediaMailOverIp 140 dtm 141 dcn 142 ipForward 143 msdsl 144 ieee1394 145 if-gsn 146 dvbRccMacLayer 147 dvbRccDownstream 148 dvbRccUpstream 149 atmVirtual 150 mplsTunnel 151 srp 152 voiceOverAtm 153 voiceOverFrameRelay 154 idsl 155 compositeLink 156 ss7SigLink 157 propWirelessP2P 158 frForward 159 rfc1483 160 usb 161 ieee8023adLag 162 bgppolicyaccounting 163 frf16MfrBundle 164 h323Gatekeeper 165 h323Proxy 166 mpls 167 mfSigLink 168 hdsl2 169 shdsl 170 ds1FDL 171 pos 172 dvbAsiIn 173 dvbAsiOut 174 plc 175 nfas 176 tr008 177 gr303RDT 178 gr303IDT 179 isup 180 propDocsWirelessMaclayer 181 propDocsWirelessDownstream 182 propDocsWirelessUpstream 183 hiperlan2 184 propBWAp2Mp 185 sonetOverheadChannel 186 digitalWrapperOverheadChannel 187 aal2 188 radioMAC 189 atmRadio 190 imt 191 mvl 192 reachDSL 193 frDlciEndPt 194 atmVciEndPt 195 opticalChannel 196 opticalTransport 197 propAtm 198 voiceOverCable 199 infiniband 200 teLink 201 q2931 202 virtualTg 203 sipTg 204 sipSig 205 docsCableUpstreamChannel 206 econet 207 pon155 208 pon622 209 bridge 210 linegroup 211 voiceEMFGD 212 voiceFGDEANA 213 voiceDID 214 mpegTransport 215 sixToFour 216 gtp 217 pdnEtherLoop1 218 pdnEtherLoop2 219 opticalChannelGroup 220 homepna 221 gfp 222 ciscoISLvlan 223 actelisMetaLOOP 224 fcipLink 225 rpr 226 qam 227 lmp 228 cblVectaStar 229 docsCableMCmtsDownstream 230 adsl2 231 macSecControlledIF 232 macSecUncontrolledIF 233 aviciOpticalEther 234 atmbond 235 voiceFGDOS 236 mocaVersion1 237 ieee80216WMAN 238 adsl2plus 239 dvbRcsMacLayer 240 dvbTdm 241 dvbRcsTdma 242 x86Laps 243 wwanPP 244 wwanPP2 245 voiceEBS 246 ifPwType 247 ilan 248 pip 249 aluELP 250 gpon 251 vdsl2 252 capwapDot11Profile 253 capwapDot11Bss 254 capwapWtpVirtualRadio 255 bits 256 docsCableUpstreamRfPort 257 cableDownstreamRfPort 258 vmwareVirtualNic 259 ieee802154 260 otnOdu 261 otnOtu 262 ifVfiType 263 g9981 264 g9982 265 g9983 266 aluEpon 267 aluEponOnu 268 aluEponPhysicalUni 269 aluEponLogicalLink 270 aluGponOnu 271 aluGponPhysicalUni 272 vmwareNicTeam 277 docsOfdmDownstream 278 docsOfdmaUpstream 279 gfast 280 sdci 281 xboxWireless 282 fastdsl 283 docsCableScte55d1FwdOob 284 docsCableScte55d1RetOob 285 docsCableScte55d2DsOob 286 docsCableScte55d2UsOob 287 docsCableNdf 288 docsCableNdr 289 ptm 290 ghn 291 otnOtsi 292 otnOtuc 293 otnOduc 294 otnOtsig 295 microwaveCarrierTermination 296 microwaveRadioLinkTerminal 297 ieee8021axDrni 298 ax25 299 ieee19061nanocom 300 cpri 301 omni 302 roe 303 p2pOverLan	.1.3.6.1.4.1.9.9.9998.1.1.3.2.1.2
clExtApIfPhyChannelAssignment If this value is on, then bsnAPDot11CurrentChannel in bsnAPIfDot11PhyDSSSTable is assigned by dynamic algorithm and is read-only.	CLSwitchr/w Type Values: 0 off 1 on	.1.3.6.1.4.1.9.9.9998.1.1.3.2.1.3
clExtApDot11RadioStatsRxByteCount This object represents the total bytes of packets received on the radio.	bytesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.9998.1.1.3.2.1.4
clExtApDot11RadioStatsTxByteCount This object represents the total bytes of packets transmitted on the radio.	bytesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.9998.1.1.3.2.1.5
clExtApDot11WirelessModeSupported This object represents wireless mode supported. bit 0 - dot11a bit 1 - dot11b bit 2 - dot11g bit 3 - dot11an bit 4 - dot11gn AP can support wireless multi-mode, the value can follow the exa…	Integer32 Constraints: range: 0-31	.1.3.6.1.4.1.9.9.9998.1.1.3.2.1.6
clExtApDot11IfAdminStatus This object represents the AP's interface administrational status.	Enumerationr/w Enumerated Values: 1 up 2 down 3 testing	.1.3.6.1.4.1.9.9.9998.1.1.3.2.1.7
clExtApDot11IfOperStatus This object represents the AP's wireless interface current operational status.	Enumeration Enumerated Values: 1 up 2 down 3 testing 4 admindown	.1.3.6.1.4.1.9.9.9998.1.1.3.2.1.8
cLExtAPDot11IfRTSThreshold This object represents RTS threshold value.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.9.9998.1.1.3.2.1.9

This table represents the statistics information
about the radios of the APs that have joined the
controller.

clExtApDot11RadioStatsEntry row .1.3.6.1.4.1.9.9.9998.1.1.3.3.1

An entry in this table represents a statistics of
the radio of an AP that has joined the conttroller.

Entries are added when the APs associate to this
controller and deleted when they lose their
association.

Indexes

CISCO-LWAPP-AP-MIBcLApSysMacAddress CISCO-LWAPP-AP-MIBcLApDot11IfSlotId

Column	Syntax	OID
clExtApDot11RadioStatsRetryFrameCount This object represents the total number of downstream retry frames on the radio.	framesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.9998.1.1.3.3.1.1
clExtApDot11RadioStatsRetryPacketCount This object represents the total number of downstream retry packets on the radio.	packetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.9998.1.1.3.3.1.2
clExtApDot11RadioStatsRxErrorPacketCount This object represents the total number of received error packets on the radio .	packetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.9998.1.1.3.3.1.3

This table represents the information about the
basic functional parameters corresponding to
the Ethernet interfaces of the APs that have joined
the controller.

clExtApEthernetIfEntry row .1.3.6.1.4.1.9.9.9998.1.1.3.4.1

An entry in this table represents the functional
parameters of the Ethernet interface of an AP that
has joined the controller.

Entries are added when the APs associate to this
controller and deleted when th…

Indexes

CISCO-LWAPP-AP-MIBcLApSysMacAddress CISCO-LWAPP-AP-MIBcLApEthernetIfSlotId

Column	Syntax	OID
clExtApEthernetIfOperStatus This object represents the operational state of the physical Ethernet interface on the AP.	Enumeration Enumerated Values: 1 up 2 down 3 testing 4 admindown	.1.3.6.1.4.1.9.9.9998.1.1.3.4.1.1
clExtApEthernetIfRxBcastPkts This object represents total number of broadcast packets received on the interface	packetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.9998.1.1.3.4.1.2
clExtApEthernetIfRxMcastPkts This object represents total number of multicast packets received on the interface	packetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.9998.1.1.3.4.1.3
clExtApEthernetIfTxBcastPkts This object represents total number of broadcast packets transmitted on the interface	packetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.9998.1.1.3.4.1.4
clExtApEthernetIfTxMcastPkts This object represents total number of multicast packets transmitted on the interface	packetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.9998.1.1.3.4.1.5

This table represents the operation information 
for each AP.

cLApOperationInfoEntry row .1.3.6.1.4.1.9.9.9998.1.1.3.5.1

Each entry in this table provides operation
information for each AP.

Indexes

cLApOperationSysMacAddress

Column	Syntax	OID
cLApOperationSysMacAddress This object specifies the AP mac address.		.1.3.6.1.4.1.9.9.9998.1.1.3.5.1.1
cLApOperationStatus This object represents operation status of each ap.	Enumeration Enumerated Values: 0 disassociated 1 associated	.1.3.6.1.4.1.9.9.9998.1.1.3.5.1.2

This table represents the WLAN configuration sent by
the controller to the LWAPP APs for their operation.
          
LWAPP APs exchange configuration messages with the
controller and get the required configuration for
their 802.11 related operations.  As part of these
messages, the WLAN configuration is pushed by the
controller to the LWAPP APs.
          
Rows are added or deleted by explicit
management actions initiated by the user from a
network management station through the
cLWlanRowStatus object.

clExtWlanConfigEntry row .1.3.6.1.4.1.9.9.9998.1.1.4.1.1

Each entry in this table represents the WLAN
configuration sent by the controller to LWAPP APs
for use during their operations. entries can be
added/deleted by explicit management actions by
NMS or by user console

Indexes

CISCO-LWAPP-WLAN-MIBcLWlanIndex

Column	Syntax	OID
clExtWlanAdminStatus Administrative Status of ESS(WLAN). By disabling an ESS the corresponding SSID is no longer broadcasted in AP beacons.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.1
clExtWlanBroadcastSsidEnable This attribute when enabled allows the switch to broadcast this SSID and when disabled doesn't allow that.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.2
clExtWlanLoadBalancingMode This object indicates the load balancing mode enabled on the controller for this WLAN . A value of 'none' indicates Load Balance is turned off for this Wlan. A value of 'clientCount' indicates load balance is based on A…	Enumerationr/w Enumerated Values: 0 none 1 uplinkUsage 2 clientCount	.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.3
clExtWlanP2PBlocking This object represents per WLAN peer-to-peer blocking behavior on controller. Peer-to-peer blocking means traffic between two clients on same VLAN will not be bridged. false : Peer-…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.4
clExtWlanSecurityAuthType This object represents per WLAN type of 802.11 Authentication. authOpen : The WLAN uses open authentication method authSharedKey : The WLAN uses shared authentication method authCiscoLeap : The WLAN uses CIS…	Enumerationr/w Enumerated Values: 0 authOpen 1 authSharedKey 128 authCiscoLeap	.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.5
clExtWlanDot11Auth This object allows the user to configure 802.11 Authentication.	Enumerationr/w Enumerated Values: 0 opensystem 1 sharekey	.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.6
clExtWlanSecurity This object allows the user to configure the security type in frame.	Enumerationr/w Enumerated Values: 0 none 1 wpa 2 wpa2 3 wapi	.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.7
clExtWlanAuthenMode This object allows the user to configure the authentication mode.	Enumerationr/w Enumerated Values: 0 none 1 psk 2 radius 3 wapi-cer	.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.8
clExtWlanSecurityCiphers This object allows the user to configure encryption mode.	Enumerationr/w Enumerated Values: 0 none 1 wep40 2 wep104 3 tkip 4 aesccmp 5 wpi-sms4	.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.9
clExtWepCipherKeyIndex This object represents the key index of WEP. According to 802.11 standard 4 keys are supported. So 802.11 Mobile Stations(Client) can have upto 4 keys. This index is for informing Mobile Station which key it should use…	Integer32r/w Constraints: range: 1-4	.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.10
clExtWepCipherKeyValue This object represents the key value of WEP. For wep104 encryption either 26 bit hex key or 13 bit ascii key should be specified. For wep40 encryption 10 bit hex key or 5 bit ascii key should be specified.	OctetStringr/w Constraints: range: 5-26	.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.11
clExtWepCipherKeyCharType This object represents the key type of WEP. Length of key specified in Key depends on this attribute.	Enumerationr/w Enumerated Values: 1 default 2 hex 3 ascii	.1.3.6.1.4.1.9.9.9998.1.1.4.1.1.12

This table represents the 802.11 wireless clients 
that are associated with the APs that have joined 
this controller.
An entry is created automatically by the controller 
when the client gets associated to the AP. An existing
entry gets deleted when the association gets dropped.
Each client added to this table is uniquely identified
by the client's MAC address.

clExtClientEntry row .1.3.6.1.4.1.9.9.9998.1.1.5.1.1

Each entry represents a conceptual row in this
table and provides the information about the
clients associated to the APs that have joined
the controller. An entry is identified the client's
MAC address.

Indexes

CISCO-LWAPP-DOT11-CLIENT-MIBcldcClientMacAddress

Column	Syntax	OID
clExtClientProtocol The 802.11 protocol type of the client. 'dot11a' - The client is using 802.11a standard to connect to the access point (AP) 'dot11b' - The client is using 802.11b standard to connect to t…	Enumeration Enumerated Values: 1 dot11a 2 dot11b 4 dot11g 8 dot11n5 16 dot11n24	.1.3.6.1.4.1.9.9.9998.1.1.5.1.1.1
clExtClientPowerSaveMode This object indicates the power management mode of the client. The possible two modes are: active(0) - this client is not in power-save mode and it is actively sending or receiving data.…	Enumeration Enumerated Values: 0 active 1 powersave	.1.3.6.1.4.1.9.9.9998.1.1.5.1.1.2
clExtClientUpTime This object indicates the duration for which the client has been associated with this device.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.9998.1.1.5.1.1.3
clExtClientAuthFailReason This object specifies the reason of the client authentication failure.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.9998.1.1.5.1.1.5
clExtClientRxThroughput This object indicates the receiving throughput which expressing a instantaneous throughput of the bytes received by the client over last time slot.	bit/sSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.9998.1.1.5.1.1.6
clExtClientTxThroughput This object indicates the transmitting throughput which expressing a instantaneous throughput of the bytes transmitted by the client over last time slot.	bit/sSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.9998.1.1.5.1.1.7

This table represents the operational parameters
at the MAC layer for the 802.11n networks managed 
through the controller. An agent adds an entry to 
this table for every 802.11n band on startup.

clExtHtMacOperationsEntry row .1.3.6.1.4.1.9.9.9998.1.1.6.1.1

Each entry represents the operational parameters
at the MAC layer for 802.11n networks.

Indexes

CISCO-LWAPP-DOT11-MIBcldHtDot11nBand

Column	Syntax	OID
clExtHtDot11nAmpduEnable This object is used to indicate the support for 802.11n A-MPDU on this band. A value of 'on' indicates that A-MPDU is enabled for this band. A value of 'off' indicates that A-MPDU is disabled for this band.	CLSwitchr/w Type Values: 0 off 1 on	.1.3.6.1.4.1.9.9.9998.1.1.6.1.1.1
clExtHtDot11nGuardIntervalEnable This object is used to indicate the support for 802.11n guard interval on this band. A value of 'on' indicates that guard interval is enabled for this band. A value of 'off' indicates that guard interval is disabled for…	CLSwitchr/w Type Values: 0 off 1 on	.1.3.6.1.4.1.9.9.9998.1.1.6.1.1.2

This table lists the configuration for each
RF profile.

clExtRFProfileEntry row .1.3.6.1.4.1.9.9.9998.1.1.7.1.1

An entry containing the configuration attributes
that affect the operation of 802.11 RF domain.

Entries can be added/deleted by explicit management
action from NMS/EMS or through user console.

Indexes

CISCO-LWAPP-RF-MIBcLRFProfileName

Column	Syntax	OID
clExtRFProfileWirelessMode This object represents wireless mode configuration. bit 0 - dot11a bit 1 - dot11b bit 2 - dot11g bit 3 - dot11an bit 4 - dot11gn AP can support wireless multi-mode, the value can follow the…	Unsigned32r/w Constraints: range: 0-31	.1.3.6.1.4.1.9.9.9998.1.1.7.1.1.1

This table lists the abnormal offline clients for the required 
security type.

clExtAbnormalOfflineClientOnSecurityTypeEntry row .1.3.6.1.4.1.9.9.9998.1.1.8.1.1

Each entry in this table represents the abnormal
offline counter based on security type.

Indexes

clExtSecurityType

Column	Syntax	OID
clExtSecurityType This object represents the client security type. open : The client uses open authentication method wepPsk : The client uses WEP/PSK authentication method peapSim : The client uses PEAP/SIM authenticati…	Enumeration Enumerated Values: 1 open 2 wepPsk 3 peapSim 4 webAuth	.1.3.6.1.4.1.9.9.9998.1.1.8.1.1.1
clExtAbnormalOfflineClientCount This object represents the current abnormal offline clients based on security type on the controller.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.9998.1.1.8.1.1.2