CISCO-LWAPP-DOT11-LDAP-MIB Table View

This table lists the information about LDAP servers
configured on the controller. Entries are added or deleted
by the user through the use of cldlServerRowStatus.

cldlServerEntry row .1.3.6.1.4.1.9.9.614.1.1.1.1

Each entry corresponds to a row in cldlServerTable and
represents the information about an LDAP server the
controller would contact for its operations.

Indexes

cldlServerIndex

Column	Syntax	OID
cldlServerIndex This object uniquely identifies an entry in cldlServerTable.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.9.9.614.1.1.1.1.1
cldlServerAddressType This object represents the type of the network address made available through cldlServerAddress.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.614.1.1.1.1.2
cldlServerAddress This object represents the address of the LDAP server that can be contacted by the controller for the purpose of authentication, authorization and accounting.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.614.1.1.1.1.3
cldlServerPortNum This object represents the port number at which the controller contacts the LDAP server.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.9.614.1.1.1.1.4
cldlServerState This object indicates whether the LDAP server is currently in use by the controller. A value of 'true' indicates that the LDAP server is in use. A value of 'false' indicates that the LDAP server is not in use.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.614.1.1.1.1.5
cldlServerTimeout This object represents the retransmit time-out value for this LDAP server. If there is no response from the LDAP server, the controller will wait for this duration, before retransmitting.	secondsUnsigned32r/w Constraints: range: 2-30	.1.3.6.1.4.1.9.9.614.1.1.1.1.6
cldlServerUserBase This object represents the name of the sub-tree in the LDAP server that contains the information about all the users in that sub-tree.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.614.1.1.1.1.7
cldlServerUserNameAttribute This object represents the attribute that stores the name of the user.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.614.1.1.1.1.8
cldlServerUserName This object represents the name of the user. This is the value for the attribute identified by cldlServerUserNameAttribute.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.614.1.1.1.1.9
cldlServerSecurityEnable This object indicates whether the LDAP transactions are secured. A value of 'true' indicates that all the LDAP transactions of the controller are secured the use of TLS tunnel. A value of 'false' indicates that the LD…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.614.1.1.1.1.10
cldlServerStorageType This object represents the storage type for this conceptual row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.614.1.1.1.1.11
cldlServerRowStatus This object represents the status column for a conceptual row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.614.1.1.1.1.12
cldlServerBindType This object represents the kind of authentication the Controller does with the LDAP server.	CldlBindTyper/w Type Values: 1 anonymous 2 authenticated	.1.3.6.1.4.1.9.9.614.1.1.1.1.13
cldlServerAuthBindUserName This object represents the name used by the Controller for the authentication with the LDAP server. For values other than 'authenticated', as identified through cldlServerBindType, this object will be populated with …	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.614.1.1.1.1.14
cldlServerAuthBindPassword This object represents the password used by the Controller for authentication with the LDAP server. For security purposes, this object will be populated with the string '****', when a valid password has been configu…	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.614.1.1.1.1.15

This table helps to map LDAP servers for WLANs
from cldlServerTable through the use of  
cldlServerIndex. When a client gets associated to a WLAN, 
the controller uses those LDAP servers that are 
mapped to that WLAN for access to information about 
the clients. 
          
The creation of a new row in cLWlanConfigTable,
through an explicit network management action,
results in creation of an entry in this table.
Similarly, deletion of a row in
cLWlanConfigTable through user action causes the
deletion of corresponding row in this table. 
          
This table has an one-to-one relationship with 
cLWlanConfigTable of CISCO-LWAPP-WLAN-MIB. There 
exists an entry in this table for each corresponding 
entry in the cLWlanConfigTable.

cldlWlanLdapEntry row .1.3.6.1.4.1.9.9.614.1.1.2.1

Each entry represents a conceptual row in
cldlWlanLdapTable and represents the LDAP
configuration for a particular WLAN
identified by cLWlanIndex.

Indexes

CISCO-LWAPP-WLAN-MIBcLWlanIndex

Column	Syntax	OID
cldlWlanLdapPrimaryServerIndex The object represents the value that maps to the primary LDAP server for this WLAN. A value of 0 indicates that the primary LDAP server is not configured for this WLAN.	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.614.1.1.2.1.1
cldlWlanLdapSecondaryServerIndex The object represents the value that maps to the secondary LDAP server for this WLAN. A value of 0 indicates that the primary LDAP server is not configured for this WLAN.	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.614.1.1.2.1.2
cldlWlanLdapTertiaryServerIndex The object represents the value that maps to the tertiary LDAP server for this WLAN. A value of 0 indicates that the primary LDAP server is not configured for this WLAN.	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.614.1.1.2.1.3