CISCO-LWAPP-DOT11-CLIENT-TS-MIB Table View

Ths table populates the messages generated during client's
association with the controller. 
Entries are automatically addded by the controller
when the client for the cldctWatchListTable associates
with the controller.
Each row represents a message generated on the
controller for the client on the watch list.
Entries are automatically removed by the controller
when the client is removed from the watchlist.  
The number of message per client is limited to the number
specified by the cldctClientInfoMaxEntries object. When 
the maximum number of entries is reached the older entries
will be deleted.

cldctClientInfoEntry row .1.3.6.1.4.1.9.9.622.1.1.1.1

Each entry in this table represents the messages
generated on the controller during the client's
association with it.

Indexes

CISCO-LWAPP-DOT11-CLIENT-MIBcldcClientMacAddress cldctClientInfoIndex

Column	Syntax	OID
cldctClientInfoIndex This object uniquely identifies the sequence number of the message for a watch listed client.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.622.1.1.1.1.1
cldctClientInfoGeneratedTime This object represents the absolute time when entry was added to table.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.622.1.1.1.1.2
cldctClientInfoLevel This object indicates the types of messages generated by the watch listed client. There can be three types of messages. 'phase' - This value represents phase transition of a wirele…	Enumeration Enumerated Values: 1 phase 2 state 3 normal	.1.3.6.1.4.1.9.9.622.1.1.1.1.3
cldctClientInfoSeverity This object indicates severity of the information of the client trouble shooting messages. This object holds good only if the corresponding cldctClientInfoLevel is set to 'normal'. 'info' - This is an in…	Enumeration Enumerated Values: 1 info 2 error 3 critical	.1.3.6.1.4.1.9.9.622.1.1.1.1.4
cldctClientInfoModule This object indicates the module which generated the message. 'dot11' - This value represents the module in controller responsible for handling the 802.11 messages. 'dot1x' - T…	Enumeration Enumerated Values: 1 dot11 2 dot1x 3 pem 4 dhcp 5 aaa 6 voiceQoS 7 misc 8 mobility	.1.3.6.1.4.1.9.9.622.1.1.1.1.5
cldctClientInfoResultCode This object indicates if this message is an informational message or an error message. This object holds good only if the corresponding cldctClientInfoLevel object has a value of 'phase' or 'state'. A value of true indi…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.622.1.1.1.1.6
cldctClientInfoMsgString This object represents the variable part of the message generated by the controller for this client. For example if the message to be shown to the user is 'Client got ip address 10.52.43.54', the '10.52.43.54' is a vari…	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.9.9.622.1.1.1.1.7
cldctClientInfoMessageType This object represents the type of the messsage generated by the controller for this client.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.9.9.622.1.1.1.1.8
cldctClientInfoMessageSubType This objects represents sub-type of the messsage generated by the controller for this client.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.9.9.622.1.1.1.1.9

This table represents the clients which are being monitored by
the controller during association.
The types of clients that can be monitored are CCX, non-CCX
and WGB clients.
          
Entries are created by explicit management action by the 
user.
          
A row is created by specifying the cldctWatchListModuleList,
 cldctWatchListTimeRemaining and cldcClientMacAddress with the
'RowStatus' changed to createAndGo.
This indicates that the request is made to start storing the
the messages on the controller for the client identified by 
cldcClientMacAddress.
          
The added row is deleted by setting the corresponding
instance of the RowStatus object to 'destroy'. In
case if the agent finds that the time duration
represented by cldctWatchListTimeRemaining has elapsed since
the addtion of the client to the watchlist, it proceeds to 
delete the row automatically, if the row exists at that point
of time.
The messages stored on the controller can be obtained
from cldctClientInfoTable.

cldctWatchListEntry row .1.3.6.1.4.1.9.9.622.1.2.1.1

Each entry in this table represents one instance
of the client troubleshooting initiated by the user
through a network manager.

Indexes

CISCO-LWAPP-DOT11-CLIENT-MIBcldcClientMacAddress

Column	Syntax	OID
cldctWatchListModuleList This object is used to specify the list of modules per client whose messages will be stored by the controller. Any combination of the modules can be set. 'dot11' - This value represents the module in con…	Bitsr/w Enumerated Values: 0 dot11 1 dot1x 2 pem 3 dhcp 4 aaa 5 voiceQoS 6 misc 7 mobility	.1.3.6.1.4.1.9.9.622.1.2.1.1.1
cldctWatchListTimeRemaining This object is used to specify the time after which the client will be automatically removed from the watchlist.	minutesUnsigned32r/w Constraints: range: 5-1000	.1.3.6.1.4.1.9.9.622.1.2.1.1.2
cldctWatchListRowStatus This object represents the status of a row and is used to create and delete specific instances of rows in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.622.1.2.1.1.3

This table stores the last policy enforcement
state of client in the controller. The state here is
represented as a string. For example the state can be
'RUN','WEBAUTH_REQUIRED' etc. 
Entries are automaticaly added to this table when a 
802.11 client associates to a controller.
Entries in this table are automaticaly deleted by
the controller when the 802.11 client disassociates
from the controller.

cldctLastPemStateEntry row .1.3.6.1.4.1.9.9.622.1.3.1.1

Each entry represents a conceptual row in this table.
An entry represents the last PEM state report by a wireless
client.

Indexes

CISCO-LWAPP-DOT11-CLIENT-MIBcldcClientMacAddress

Column	Syntax	OID
cldctLastPemState This object represents the last policy enforcement manager state of the client in controller.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.622.1.3.1.1.1