CISCO-LWAPP-DOT11-CLIENT-CCX-REPORTS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
42

cldccrRmReqTable

table
.1.3.6.1.4.1.9.9.767.1.1.1 · 1 row entry · 5 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cldccrRmReqTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-CLIENT-CCX-REPORTS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-CLIENT-CCX-REPORTS-MIB::cldccrRmReqTable' 
This table is used to configure the radio
measurement request parameters to be sent to the ccxv4 
clients.
cldccrRmReqEntry row .1.3.6.1.4.1.9.9.767.1.1.1.1
Each entry represents a conceptual row in this table.
An entry corresponds to a client for which a certain
type of report is being fetched.
Indexes
Column Syntax OID
cldccrRmReqReportType
This object is set to list of radio measurement
requests the reports of which will be sent by the
ccxv4 client to the controller.
Bitsr/w
Enumerated Values:
0channelLoadReport
1histogramReport
2beaconReport
3frameReport
 .1.3.6.1.4.1.9.9.767.1.1.1.1.1
cldccrRmInitiateReq
This object is used to send the rm req message to the
client.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.767.1.1.1.1.2
cldccrRmReqNumIterations
This attribute is used to set the number of times
the rm request will be sent to the client.
Integer32r/w
Constraints:
range: 0-250
 .1.3.6.1.4.1.9.9.767.1.1.1.1.3
cldccrRmReqMeasDuration
The time interval between two RM Reqs in seconds.
Unsigned32r/w
Constraints:
range: 5-32400
 .1.3.6.1.4.1.9.9.767.1.1.1.1.4
cldccrRmReqRowStatus
This is the status column for this row and is used to
create and delete specific instances of rows in this
table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.767.1.1.1.1.5

cldccrRmHistRepTable

table
.1.3.6.1.4.1.9.9.767.1.2.1 · 1 row entry · 11 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cldccrRmHistRepTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-CLIENT-CCX-REPORTS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-CLIENT-CCX-REPORTS-MIB::cldccrRmHistRepTable' 
This table contains the noise histogram reports of the clients
which were queried for the same.
cldccrRmHistRepEntry row .1.3.6.1.4.1.9.9.767.1.2.1.1
There is an entry in the table where entry is identified
by the client Mac address.
Indexes
Column Syntax OID
cldccrRmHistIndex
Index which will be the channel number in most
cases.
Unsigned32
Constraints:
range: 0-28
 .1.3.6.1.4.1.9.9.767.1.2.1.1.1
cldccrRmHistRepChannelNumber
Channel number indicates the channel number to which the noise
histogram Report applies.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.767.1.2.1.1.2
cldccrRmHistRepTimeStamp
Timestamp of the histogram report.
OctetString .1.3.6.1.4.1.9.9.767.1.2.1.1.3
cldccrRmHistRepRPIDensity0
This Field stores the RPI density in power range
power << -87 db.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.767.1.2.1.1.4
cldccrRmHistRepRPIDensity1
This Field stores the RPI density in power
range -87 < power << -82.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.767.1.2.1.1.5
cldccrRmHistRepRPIDensity2
This Field stores the RPI density in power
range -82 < power << -77.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.767.1.2.1.1.6
cldccrRmHistRepRPIDensity3
This Field stores the RPI density in power
range -77 < power << -72.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.767.1.2.1.1.7
cldccrRmHistRepRPIDensity4
This Field stores the RPI density in power
range -72< Power << -67.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.767.1.2.1.1.8
cldccrRmHistRepRPIDensity5
This Field stores the RPI density in power
range -67< Power << -62.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.767.1.2.1.1.9
cldccrRmHistRepRPIDensity6
This Field stores the RPI density in power
range -62< Power<< -57.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.767.1.2.1.1.10
cldccrRmHistRepRPIDensity7
This Field stores the RPI density in power
range -57< Power<< -52.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.767.1.2.1.1.11

cldccrRmBeaconRepTable

table
.1.3.6.1.4.1.9.9.767.1.2.2 · 1 row entry · 10 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cldccrRmBeaconRepTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-CLIENT-CCX-REPORTS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-CLIENT-CCX-REPORTS-MIB::cldccrRmBeaconRepTable' 
This table contains the beacon reports of the clients
which were queried for the same.
cldccrRmBeaconRepEntry row .1.3.6.1.4.1.9.9.767.1.2.2.1
There is an entry in the table where entry is identified
by the client Mac address.
Indexes
Column Syntax OID
cldccrRmBeaconIndex
Index which will be the channel number in most
cases.
Unsigned32
Constraints:
range: 0-28
 .1.3.6.1.4.1.9.9.767.1.2.2.1.1
cldccrRmBeaconRptChannelNumber
Channel number indicates the channel number to which the noise
beacon report applies.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.767.1.2.2.1.2
cldccrRmBeaconRptTimeStamp
Timestamp of the beacon report.
OctetString .1.3.6.1.4.1.9.9.767.1.2.2.1.3
cldccrRmBeaconRptPhyType
Phy type indicates the physical
medium used.
Enumeration
Enumerated Values:
1fh
2dss
3unused
4ofdm
5highDataRateDss
6erp
 .1.3.6.1.4.1.9.9.767.1.2.2.1.4
cldccrRmBeaconRptReceivedPower
This field indicates the received strength of
the beacon or probe response frame in dBm.
Unsigned32
Constraints:
range: 0-250
 .1.3.6.1.4.1.9.9.767.1.2.2.1.5
cldccrRmBeaconRptBSSID
This field contains the 6-byte BSSID of the STA that
transmitted the beacon or probe response frame.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.9.9.767.1.2.2.1.6
cldccrRmBeaconRptParentTsf
This field is used to store the parent TSF
Parent TSF contains the lower 4 bytes of the serving APs.
TSF value at the time the measuring STA received the beacon
or probe response frame.
OctetString
Constraints:
range: 64-64
 .1.3.6.1.4.1.9.9.767.1.2.2.1.7
cldccrRmBeaconRptTargetTsf
This field is used to store the Target TSF.
Target TSF contains the 8-byte TSF value contained in the
beacon or probe response received by the measuring STA.
OctetString
Constraints:
range: 64-64
 .1.3.6.1.4.1.9.9.767.1.2.2.1.8
cldccrRmBeaconRptInterval
This field is equal to the 2-byte Beacon Interval
field in the received beacon or probe response.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.767.1.2.2.1.9
cldccrRmBeaconRptCapInfo
This attribute represents the capability info.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.767.1.2.2.1.10

cldccRmChannelLoadReportTable

table
.1.3.6.1.4.1.9.9.767.1.2.3 · 1 row entry · 4 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cldccRmChannelLoadReportTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-CLIENT-CCX-REPORTS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-CLIENT-CCX-REPORTS-MIB::cldccRmChannelLoadReportTable' 
This table contains the channel load reports of
the clients which were queried for the same.
cldccRmChannelLoadReportEntry row .1.3.6.1.4.1.9.9.767.1.2.3.1
There is an entry in the table where entry is
identified by the client Mac address.
Indexes
Column Syntax OID
cldccRmChannelLoadReportIndex
This indicates the index of the report table.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.767.1.2.3.1.1
cldccRmChannelLoadReportChannelNumber
Channel Number indicates the channel number to which
the Channel Load Report applies.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.767.1.2.3.1.2
cldccRmChannelLoadReportTimeStamp
Timestamp of the channel load report.
OctetString .1.3.6.1.4.1.9.9.767.1.2.3.1.3
cldccRmChannelLoadReportCCABusyFraction
CCA Busy Fraction shall contain the fractional duration
over which CCA indicated the channel was busy during the
measurement duration.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.767.1.2.3.1.4

cldccRmFrameReportTable

table
.1.3.6.1.4.1.9.9.767.1.2.4 · 1 row entry · 8 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cldccRmFrameReportTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-CLIENT-CCX-REPORTS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-CLIENT-CCX-REPORTS-MIB::cldccRmFrameReportTable' 
This table contains the frame reports of
the clients which were queried for the same.
cldccRmFrameReportEntry row .1.3.6.1.4.1.9.9.767.1.2.4.1
There is an entry in the table where entry is
identified by the client Mac address.
Indexes
Column Syntax OID
cldccRmFrameReportElemIndex
This attribute represents the index of
element index of frame report.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.767.1.2.4.1.1
cldccRmFrameReportSubElemIndex
This attribute represents the index of
the sub element in a frame report.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.767.1.2.4.1.2
cldccRmFrameReportChanNumber
This attribute represents the channel number
of frame report.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.767.1.2.4.1.3
cldccRmFrameReportTimeStamp
Timestamp of the frame report.
OctetString .1.3.6.1.4.1.9.9.767.1.2.4.1.4
cldccRmFrameReportTransmitAddr
This represents the transmitted address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.9.9.767.1.2.4.1.5
cldccRmFrameReportBssid
This represents the bssid.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.9.9.767.1.2.4.1.6
cldccRmFrameReportRecvSigPower
This field indicates the received strength of
the beacon or probe response frame in dBm.
Unsigned32
Constraints:
range: 0-250
 .1.3.6.1.4.1.9.9.767.1.2.4.1.7
cldccRmFrameReportFrameCount
This field indicates the received strength of
the beacon or probe response frame in dBm.
Unsigned32
Constraints:
range: 0-250
 .1.3.6.1.4.1.9.9.767.1.2.4.1.8

cldccrRmReqStatusTable

table
.1.3.6.1.4.1.9.9.767.1.3.1 · 1 row entry · 4 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cldccrRmReqStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-CLIENT-CCX-REPORTS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-CLIENT-CCX-REPORTS-MIB::cldccrRmReqStatusTable' 
This table is used to get the status for
each of the reports.
cldccrRmReqStatusEntry row .1.3.6.1.4.1.9.9.767.1.3.1.1
There is an entry in the table where entry is identified
by the client Mac address.
Indexes
Column Syntax OID
cldccrRmFrameReqStatus
This attribute is used to initiate/track a frame
report request to the ccxv4 client.
CiscoLwappCcxRmReqStatus
Type Values:
1inProgress
2success
3failure
 .1.3.6.1.4.1.9.9.767.1.3.1.1.1
cldccrRmHistogramReqStatus
This attribute is used to initiate/track a noise histogram
request to the ccxv4 client.
CiscoLwappCcxRmReqStatus
Type Values:
1inProgress
2success
3failure
 .1.3.6.1.4.1.9.9.767.1.3.1.1.2
cldccrRmBeaconReqStatus
This attribute is used to initiate/track a beacon request
to the ccxv4 client.
CiscoLwappCcxRmReqStatus
Type Values:
1inProgress
2success
3failure
 .1.3.6.1.4.1.9.9.767.1.3.1.1.3
cldccrRmChanLoadReqStatus
This attribute is used to initiate/track a channel load request
to the ccxv4 client.
CiscoLwappCcxRmReqStatus
Type Values:
1inProgress
2success
3failure
 .1.3.6.1.4.1.9.9.767.1.3.1.1.4