CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
6
Rows
6
Columns
35
.1.3.6.1.4.1.9.9.480.1.1.1
·
1 row entry
·
3 columns
Uses the cisco variant from
Command help
/opt/observium/mibs/cisco.
Walk ciscoL4L7ResourceClassTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB::ciscoL4L7ResourceClassTable'
This table contains one row per resource class. This table is used for adding/deleting the resource class in the system. A resource class can contain limits for different category of resources and these resources can be configured using other tables.
Information about a particular resource class.
Each entry provides the name of class.
The entPhysicalIndex refers to resource manageable
component in entPhysicalTable with
entPhysicalClass -> 'module'.
Each entry provides the name of class.
The entPhysicalIndex refers to resource manageable
component in entPhysicalTable with
entPhysicalClass -> 'module'.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| crlResourceClassNameThis object identifies a unique resource class in a resource manageable component identified by entPhysicalIndex. | CiscoResourceClass Type Constraints: range: 0..64 | .1.3.6.1.4.1.9.9.480.1.1.1.1.1 | ||||||||||||
| crlResourceClassStorageTypeThe storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object can not be modified when the value of crlResourceClassRo… | SNMPv2-TCStorageTyper/w Type Values:
Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is … | .1.3.6.1.4.1.9.9.480.1.1.1.1.2 | ||||||||||||
| crlResourceClassRowStatusThis object is used for adding/deleting resource classes in a system. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.9.9.480.1.1.1.1.3 |
.1.3.6.1.4.1.9.9.480.1.1.2
·
1 row entry
·
9 columns
Uses the cisco variant from
Command help
/opt/observium/mibs/cisco.
Walk ciscoL4L7ResourceLimitTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB::ciscoL4L7ResourceLimitTable'
This table is used for adding resource limits to resources in a resource class.
Information about a particular resource in a resource
class. Each entry provides the type of resource,
the limit that is supported for that resource
and type of the limit value.
class. Each entry provides the type of resource,
the limit that is supported for that resource
and type of the limit value.
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| crlResourceLimitTypeThis object represents the type of resource in a resource class identified by crlResourceClassName. | CiscoResourceLimitType Type Values:
| .1.3.6.1.4.1.9.9.480.1.1.2.1.2 | ||||||||||||||||||||||||||||||||||||||||||
| crlResourceLimitValueTypeThis object represents the type of value specified in crlResourceLimitMax and crlResourceLimitMin objects. The possible values are : absolute (1) : the value represents an absolute number. percentage (2) : the va… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.9.9.480.1.1.2.1.3 | ||||||||||||||||||||||||||||||||||||||||||
| crlResourceLimitMinThis object represents the rate limit allowed for the resource identified by 'ciscoResourceLimitType'. This value cannot be greater than the value specified in ciscoResourceLimitMax. The value zero signifies that this o… | SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.9.9.480.1.1.2.1.4 | ||||||||||||||||||||||||||||||||||||||||||
| crlResourceLimitMaxThis object represents the limit allowed for the resource identified by 'ciscoResourceLimitType'. The value zero specifies that this resource can be used until the system limit reached. | SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.9.9.480.1.1.2.1.5 | ||||||||||||||||||||||||||||||||||||||||||
| crlResourceLimitStorageTypeThe storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object cannot be modified when the value of crlResourceLimitRow… | SNMPv2-TCStorageTyper/w Type Values:
Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is … | .1.3.6.1.4.1.9.9.480.1.1.2.1.6 | ||||||||||||||||||||||||||||||||||||||||||
| crlResourceLimitRowStatusThis object is used for adding/deleting entries in this table. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.9.9.480.1.1.2.1.7 | ||||||||||||||||||||||||||||||||||||||||||
| crlResourceLimitCurrentUsageThis object indicates the number of resources identified by 'ciscoResourceLimitType', that are currently being used in the system. | SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.9.9.480.1.1.2.1.8 | ||||||||||||||||||||||||||||||||||||||||||
| crlResourceLimitPeakUsageThis object represents the peak usage of the resource identified by 'ciscoResourceLimitType' since the statistics were last cleared either through the command line interface or bacause of the system reboot. | SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.9.9.480.1.1.2.1.9 | ||||||||||||||||||||||||||||||||||||||||||
| crlResourceLimitReqsDeniedCountThis object represents the number of resource requests that were denied when the configured resource limit is exceeded for the resource identified by 'ciscoResourceLimitType'. The value for resource limit… | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.9.9.480.1.1.2.1.10 |
.1.3.6.1.4.1.9.9.480.1.1.4
·
1 row entry
·
8 columns
Uses the cisco variant from
Command help
/opt/observium/mibs/cisco.
Walk ciscoL4L7ResourceRateLimitTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB::ciscoL4L7ResourceRateLimitTable'
This table is used for adding/deleting the rate limiting of the resources in a resource class.
Information about an entry in the table
Each entry provides the name of group, the rate
configured for a resource.
Each entry provides the name of group, the rate
configured for a resource.
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| crlRateLimitResourceTypeThis object represents the resource type for which rate limiting needs to be done. The value for rate limiting is specified in crlRateLimitResourceMin and crlRateLimitResourceMax. | CiscoRateLimitResourceType Type Values:
| .1.3.6.1.4.1.9.9.480.1.1.4.1.1 | ||||||||||||||||||||||||||
| crlRateLimitResourceMinThis object represents the rate limit allowed for the resource identified by 'crlRateLimitResourceType'. This value cannot be greater than the value specified in crlRateLimitResourceMax. The value zero signifies that th… | SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.9.9.480.1.1.4.1.2 | ||||||||||||||||||||||||||
| crlRateLimitResourceMaxThis object represents the limit allowed for the resource identified by 'crlRateLimitResourceType'. The value zero specifies that this resource can be used until the system limit reached. | SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.9.9.480.1.1.4.1.3 | ||||||||||||||||||||||||||
| crlRateLimitResourceStorageTypeThe storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object cannot be modified when the value of crlRateLimitResourc… | SNMPv2-TCStorageTyper/w Type Values:
Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is … | .1.3.6.1.4.1.9.9.480.1.1.4.1.4 | ||||||||||||||||||||||||||
| crlRateLimitResourceRowStatusThis object is used for adding/deleting entries in this table. This object cannot be set to 'active' until all the mandatory objects have valid value. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.9.9.480.1.1.4.1.5 | ||||||||||||||||||||||||||
| crlRateLimitResourceCurrentUsageThis object indicates the number of resources identified by 'crlRateLimitResourceType', that are currently being used in the system. | SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.9.9.480.1.1.4.1.6 | ||||||||||||||||||||||||||
| crlRateLimitResourcePeakUsageThis object represents the peak usage of the resource identified by 'crlRateLimitResourceType' since the statistics were last cleared either through the command line interface or bacause of the system reboot. | SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.9.9.480.1.1.4.1.7 | ||||||||||||||||||||||||||
| crlRateLimitResourceReqsDeniedCountThis object represents the number of resource requests that were denied when the configured rate limit is exceeded for the resource identified by 'crlRateLimitResourceType'. The value for rate limiting is… | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.9.9.480.1.1.4.1.8 |
.1.3.6.1.4.1.9.9.480.1.1.5
·
1 row entry
·
7 columns
Uses the cisco variant from
Command help
/opt/observium/mibs/cisco.
Walk ciscoL4L7ResourceUsageSummaryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB::ciscoL4L7ResourceUsageSummaryTable'
This table provides the statistics for each resource type in a system. The resource usage statistics can be: - current usage for the resource. - peak usage for the resource. - Number of times the resource request were denied when the configured limit or rate-limit is exceeded for the resource.
An entry in ciscoL4L7ResourceUsageSummaryTable. Each entry
provides the resource usage parameters in a system.
An entry is created when an entry is created in
either 'ciscoL4L7ResourceLimitTable' or
'ciscoL…
provides the resource usage parameters in a system.
An entry is created when an entry is created in
either 'ciscoL4L7ResourceLimitTable' or
'ciscoL…
Indexes
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| crlResourceSummaryTypeThis object represents a type of resource in the system. | CiscoResourceType Type Values:
| .1.3.6.1.4.1.9.9.480.1.1.5.1.1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| crlResourceSummaryCurrentUsageThis object indicates the current usage of the resource in the system. | SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.9.9.480.1.1.5.1.2 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| crlResourceSummaryPeakUsageThis object represents the peak usage of the resource in the system. | SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.9.9.480.1.1.5.1.3 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| crlResourceSummaryReqsDeniedCountThis object represents the number of resource requests that were denied in the system when the configured limit is exceeded for the resource. The value for limiting is specified in 'crlResourceLimitMax' a… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.9.9.480.1.1.5.1.4 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| crlResourceSummaryLastClearedTimeThis object represents the time when the value of the object identified by 'crlResourceSummaryPeakUsage' is last cleared or reset. A value of 0 (zero) signifies that the value has not been cleared since the last system … | SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… | .1.3.6.1.4.1.9.9.480.1.1.5.1.5 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| crlResourceSummaryStorageTypeThe storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object cannot be modified when the value of 'crlResourceSummary… | SNMPv2-TCStorageTyper/w Type Values:
Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is … | .1.3.6.1.4.1.9.9.480.1.1.5.1.6 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| crlResourceSummaryRowStatusThis object is used for adding/deleting entries in this table. This object cannot be set to 'active' until all the mandatory objects have valid value. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.9.9.480.1.1.5.1.7 |
.1.3.6.1.4.1.9.9.480.1.1.6
·
1 row entry
·
7 columns
Uses the cisco variant from
Command help
/opt/observium/mibs/cisco.
Walk ciscoL4L7BufferUtilizationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB::ciscoL4L7BufferUtilizationTable'
This table provides the statistics for buffer utilization in a system. The buffer utilization statistics can be: - absolute buffer usage value per network processor(NP). - percentage buffer usage per network processor(NP).
An entry in ciscoL4L7BufferUtilizationTable. Each entry
provides the buffer usage in a system.
provides the buffer usage in a system.
Indexes
| Column | Syntax | OID |
|---|---|---|
| clrNetworkProcessorThis object represents network processor number(NP) in the system. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.9.9.480.1.1.6.1.1 |
| crlBufferUsageValueThis object indicates the absolute buffer usage in the system. | buffersSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.9.9.480.1.1.6.1.2 |
| crlPercentageBufferUsageThis object represents the percentage buffer usage in the the decimal format to allow historical information to be collected. | percentageCiscoBufferUtilPercentage Type Constraints: range: 0..10000 | .1.3.6.1.4.1.9.9.480.1.1.6.1.3 |
| crlPercentageBufferUsageDisplayThis object represents the percentage buffer usage in the string format to all interactive access to simple display format. | percentageSNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255 | .1.3.6.1.4.1.9.9.480.1.1.6.1.4 |
| crlExternalBufferUsageValueThis object indicates the absolute external buffer usage in the system. | buffersSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.9.9.480.1.1.6.1.5 |
| crlExternalPercentageBufferUsageThis object represents the percentage external buffer usage in the the decimal format to allow historical information to be collected. | percentageCiscoBufferUtilPercentage Type Constraints: range: 0..10000 | .1.3.6.1.4.1.9.9.480.1.1.6.1.6 |
| crlExternalPercentageBufferUsageDisplayThis object represents the percentage external buffer usage in the string format to all interactive access to simple display format. | percentageSNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255 | .1.3.6.1.4.1.9.9.480.1.1.6.1.7 |
ciscoL4L7NpCpuUtilTable
table.1.3.6.1.4.1.9.9.480.1.1.7
·
1 row entry
·
1 columns
Uses the cisco variant from
Command help
/opt/observium/mibs/cisco.
Walk ciscoL4L7NpCpuUtilTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB::ciscoL4L7NpCpuUtilTable'
This table lists the CPU utilization statistics for each NP (network processor) in the device.
Each row contains the average CPU utilization of all
sub-processors for a network processor identified by its
clrNetworkProcessor value.
sub-processors for a network processor identified by its
clrNetworkProcessor value.
Indexes
| Column | Syntax | OID |
|---|---|---|
| clrNpCpuUtilizationAverageThis object indicates the average CPU utilization of all sub-processors belonged to a particular network processor at that instance. | SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.9.9.480.1.1.7.1.1 |