CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB

        The MIB module for managing resource classes
and configuring limits(max/min) to different
resources.  The resource referenced in this MIB 
are in addition to resource information availale 
in other MIBs.  This MIB is applicable to
L4-L7 modules which supports managing
resource limits using a centralized approach.
The resources (but not limited to) configured are 
of following categories:
- TCP/IP Connections
- MAC Addresses
- syslog buffer, ACL Memmory
- NAT Translations etc
        
ciscoL4L7ResourceClassTable is used for adding/deleting
resource classes.  Resource class is identified
by a name to which limits of multiple resources can
be configured.
        
ciscoL4L7ResourceLimitTable is used for adding/deleting
limits to resources in a resource class.  This limit
is either maximum value and/or minimal value.
        
ciscoL4L7ResourceRateLimitTable is used for adding/deleting
rate limits to resources in a resource class.
        
Terminologies used:
  ARP - Address Resolution Protocol.
  ACL - Access Control List.
  NAT - Network Address Translation.
  NBAR - Network Based Application Recognition.
  BPDU - Bridge Protocol Data Unit.
    
Source file
CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB
Last revised
Identity
ciscoL4L7moduleResourceLimitMIB
Base OID
1.3.6.1.4.1.9.9.480
Imported Objects
CISCO-SMI ciscoMgmt
ENTITY-MIB entPhysicalIndex
INET-ADDRESS-MIB InetAddress InetAddressType
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Counter64 Gauge32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC RowStatus StorageType TEXTUAL-CONVENTION (no object page) TimeStamp TruthValue
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB::ciscoL4L7moduleResourceLimitMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB::ciscoL4L7moduleResourceLimitMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (70)
.1.3.6.1.4.1.9.9.480
.1.3.6.1.4.1.9.9.480.0
.1.3.6.1.4.1.9.9.480.1
.1.3.6.1.4.1.9.9.480.1.1
.1.3.6.1.4.1.9.9.480.1.1.1
.1.3.6.1.4.1.9.9.480.1.1.1.1
.1.3.6.1.4.1.9.9.480.1.1.1.1.1
.1.3.6.1.4.1.9.9.480.1.1.1.1.2
.1.3.6.1.4.1.9.9.480.1.1.1.1.3
.1.3.6.1.4.1.9.9.480.1.1.2
.1.3.6.1.4.1.9.9.480.1.1.2.1
.1.3.6.1.4.1.9.9.480.1.1.2.1.10
.1.3.6.1.4.1.9.9.480.1.1.2.1.2
Enumeration
.1.3.6.1.4.1.9.9.480.1.1.2.1.3
.1.3.6.1.4.1.9.9.480.1.1.2.1.4
.1.3.6.1.4.1.9.9.480.1.1.2.1.5
.1.3.6.1.4.1.9.9.480.1.1.2.1.6
.1.3.6.1.4.1.9.9.480.1.1.2.1.7
.1.3.6.1.4.1.9.9.480.1.1.2.1.8
.1.3.6.1.4.1.9.9.480.1.1.2.1.9
.1.3.6.1.4.1.9.9.480.1.1.4
.1.3.6.1.4.1.9.9.480.1.1.4.1
.1.3.6.1.4.1.9.9.480.1.1.4.1.1
.1.3.6.1.4.1.9.9.480.1.1.4.1.2
.1.3.6.1.4.1.9.9.480.1.1.4.1.3
.1.3.6.1.4.1.9.9.480.1.1.4.1.4
.1.3.6.1.4.1.9.9.480.1.1.4.1.5
.1.3.6.1.4.1.9.9.480.1.1.4.1.6
.1.3.6.1.4.1.9.9.480.1.1.4.1.7
.1.3.6.1.4.1.9.9.480.1.1.4.1.8
.1.3.6.1.4.1.9.9.480.1.1.5
.1.3.6.1.4.1.9.9.480.1.1.5.1
.1.3.6.1.4.1.9.9.480.1.1.5.1.1
.1.3.6.1.4.1.9.9.480.1.1.5.1.2
.1.3.6.1.4.1.9.9.480.1.1.5.1.3
.1.3.6.1.4.1.9.9.480.1.1.5.1.4
.1.3.6.1.4.1.9.9.480.1.1.5.1.5
.1.3.6.1.4.1.9.9.480.1.1.5.1.6
.1.3.6.1.4.1.9.9.480.1.1.5.1.7
.1.3.6.1.4.1.9.9.480.1.1.6
.1.3.6.1.4.1.9.9.480.1.1.6.1
.1.3.6.1.4.1.9.9.480.1.1.6.1.1
.1.3.6.1.4.1.9.9.480.1.1.6.1.2
.1.3.6.1.4.1.9.9.480.1.1.6.1.3
.1.3.6.1.4.1.9.9.480.1.1.6.1.4
.1.3.6.1.4.1.9.9.480.1.1.6.1.5
.1.3.6.1.4.1.9.9.480.1.1.6.1.6
.1.3.6.1.4.1.9.9.480.1.1.6.1.7
.1.3.6.1.4.1.9.9.480.1.1.7
.1.3.6.1.4.1.9.9.480.1.1.7.1
.1.3.6.1.4.1.9.9.480.1.1.7.1.1
.1.3.6.1.4.1.9.9.480.1.2
.1.3.6.1.4.1.9.9.480.1.2.1
.1.3.6.1.4.1.9.9.480.1.2.2
.1.3.6.1.4.1.9.9.480.1.3
Enumeration
.1.3.6.1.4.1.9.9.480.1.3.1
.1.3.6.1.4.1.9.9.480.1.3.10
.1.3.6.1.4.1.9.9.480.1.3.11
Enumeration
.1.3.6.1.4.1.9.9.480.1.3.2
.1.3.6.1.4.1.9.9.480.1.3.3
.1.3.6.1.4.1.9.9.480.1.3.4
percentUnsigned32
.1.3.6.1.4.1.9.9.480.1.3.5
percentUnsigned32
.1.3.6.1.4.1.9.9.480.1.3.6
percentUnsigned32
.1.3.6.1.4.1.9.9.480.1.3.7
Enumeration
.1.3.6.1.4.1.9.9.480.1.3.8
.1.3.6.1.4.1.9.9.480.1.3.9
.1.3.6.1.4.1.9.9.480.2
.1.3.6.1.4.1.9.9.480.3
.1.3.6.1.4.1.9.9.480.3.1
.1.3.6.1.4.1.9.9.480.3.2
Dependencies (9) 7 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (5)
Integer32 range: 0..10000
Enumeration
all(1)
arpRequestsXmt(2)
arpResponses(3)
bandwidth(4)
connections(5)
appInspections(6)
syslog(7)
sslBandwidth(8)
sslConnections(9)
mgmtBandwidth(10)
throughput(11)
missedMac(12)
httpCompression(13)
OctetString range: 0..64
Enumeration
all(1)
macAddresses(2)
concurrentConns(3)
mgmtConnections(4)
proxyConns(5)
probes(6)
stickyEntries(7)
natTranslations(8)
regexState(9)
aclMemory(10)
syslogBuffer(11)
ipReassemBuffer(12)
tcpOOOBuffer(13)
sslConnections(14)
hosts(15)
ipsecSessions(16)
asdmSessions(17)
sshSessions(18)
telnetSessions(19)
cpu(20)
memory(21)
Enumeration
lMacAddresses(1)
lConcurrentConns(2)
lMgmtConnections(3)
lProxyConns(4)
lProbes(5)
lStickyEntries(6)
lNatTranslations(7)
lRegexState(8)
lAclMemory(9)
lIpReassemBuffer(10)
lSyslogBuffer(11)
lTcpOOOBuffer(12)
lSslConnections(13)
lHosts(14)
lIpsecSessions(15)
lAsdmSessions(16)
lSshSessions(17)
lTelnetSessions(18)
rlArpRequestsXmt(19)
rlArpResponses(20)
rlBandwidth(21)
rlConnections(22)
rlAppInspections(23)
rlSyslog(24)
rlSslBandwidth(25)
rlSslConnections(26)
rlMgmtBandwidth(27)
rlThroughput(28)
rlMissedMac(29)
rlHttpCompression(30)
Conformance Groups (15)
The collection of objects which are used to represent
resource class in a system.
.1.3.6.1.4.1.9.9.480.3.2.1
The collection of objects which are used to represent
limits of resources in a resource class.
.1.3.6.1.4.1.9.9.480.3.2.2
The collection of objects which are used to represent
rate limits for resources.
.1.3.6.1.4.1.9.9.480.3.2.3
The collection of objects which are used to represent
limit usage for resources.
.1.3.6.1.4.1.9.9.480.3.2.4
The collection of objects which are used to represent
rate limit usage for resources.
.1.3.6.1.4.1.9.9.480.3.2.5
The collection of objects which are used to represent
limit usage for resources.
.1.3.6.1.4.1.9.9.480.3.2.6
The collection of objects which are used to represent
rate limit usage for resources.
ciscoL4L7ResourceNotifGroup object is superseded by
ciscoL4L7ResourceNotifGroupRev1.
.1.3.6.1.4.1.9.9.480.3.2.7
The collection of objects which are used to represent
usage summary for resources across the system.
.1.3.6.1.4.1.9.9.480.3.2.8
The collection of objects which are used to represent
buffer utilization across the system.
ciscoL4L7BufferUtilizationGroup object is superseded by
ciscoL4L7BufferUtilizationGroupRev1.
.1.3.6.1.4.1.9.9.480.3.2.9
A collection of objects providing CPU utilization of
network processors.
.1.3.6.1.4.1.9.9.480.3.2.10
The collection of objects which are used to represent
buffer utilization across the system.
.1.3.6.1.4.1.9.9.480.3.2.11
The collection of notifications which are used to report
resources usages to raising/falling below the configured
thresholds.
ciscoL4L7ResourceNotifGroupRev1 object is superseded by ciscoL4L7ResourceNotifGroupRev2.
.1.3.6.1.4.1.9.9.480.3.2.12
A collection of object(s) providing variable binding
information for resource notifications.
.1.3.6.1.4.1.9.9.480.3.2.13
The collection of notifications which are used to report
resources usages to raising/falling below the configured
thresholds.
.1.3.6.1.4.1.9.9.480.3.2.14
A collection of object(s) providing variable binding
information for resource notifications.
.1.3.6.1.4.1.9.9.480.3.2.15
Compliance Statements (8)

OID .1.3.6.1.4.1.9.9.480.3.1.1
The compliance statement for SNMP entities which implement
CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB.
Required groups
mandatory ciscoL4L7ResourceClassGroup
mandatory ciscoL4L7ResourceLimitGroup
optional ciscoL4L7ResourceRateLimitGroup This group is mandatory for those systems where
rate limiting is supported.

OID .1.3.6.1.4.1.9.9.480.3.1.2
The compliance statement for SNMP entities which implement
CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB.
Required groups
mandatory ciscoL4L7ResourceClassGroup
mandatory ciscoL4L7ResourceLimitGroup
mandatory ciscoL4L7ResourceLimitUsageGroup
optional ciscoL4L7ResourceRateLimitGroup This group is mandatory for those systems where
rate limiting is supported.
optional ciscoL4L7ResourceRateLimitUsageGroup This group is mandatory for those systems where
rate limiting is supported.
optional ciscoL4L7ResourceNotifEnabledGroup This group is mandatory for those systems which
implement resource limit notifications.
optional ciscoL4L7ResourceNotifGroup This group is mandatory for those systems which
implement resource limit notifications.

OID .1.3.6.1.4.1.9.9.480.3.1.3
The compliance statement for SNMP entities which implement
CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB.
Required groups
mandatory ciscoL4L7ResourceClassGroup
mandatory ciscoL4L7ResourceLimitGroup
mandatory ciscoL4L7ResourceLimitUsageGroup
optional ciscoL4L7ResourceRateLimitGroup This group is mandatory for those systems where
rate limiting is supported.
optional ciscoL4L7ResourceRateLimitUsageGroup This group is mandatory for those systems where
rate limiting is supported.
optional ciscoL4L7ResourceNotifEnabledGroup This group is mandatory for those systems which
implement resource limit notifications.
optional ciscoL4L7ResourceNotifGroup This group is mandatory for those systems which
implement resource limit notifications.
optional ciscoL4L7ResourceUsageSummaryGroup This group is mandatory for those systems which
implement resource limiting and/or rate limiting
of resource.

OID .1.3.6.1.4.1.9.9.480.3.1.4
The compliance statement for SNMP entities which implement
CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB.
Required groups
mandatory ciscoL4L7ResourceClassGroup
mandatory ciscoL4L7ResourceLimitGroup
mandatory ciscoL4L7ResourceLimitUsageGroup
mandatory ciscoL4L7BufferUtilizationGroup
optional ciscoL4L7ResourceRateLimitGroup This group is mandatory for those systems where
rate limiting is supported.
optional ciscoL4L7ResourceRateLimitUsageGroup This group is mandatory for those systems where
rate limiting is supported.
optional ciscoL4L7ResourceNotifEnabledGroup This group is mandatory for those systems which
implement resource limit notifications.
optional ciscoL4L7ResourceNotifGroup This group is mandatory for those systems which
implement resource limit notifications.
optional ciscoL4L7ResourceUsageSummaryGroup This group is mandatory for those systems which
implement resource limiting and/or rate limiting
of resource.

OID .1.3.6.1.4.1.9.9.480.3.1.5
The compliance statement for SNMP entities which implement
CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB.
Required groups
mandatory ciscoL4L7ResourceClassGroup
mandatory ciscoL4L7ResourceLimitGroup
mandatory ciscoL4L7ResourceLimitUsageGroup
mandatory ciscoL4L7BufferUtilizationGroup
optional ciscoL4L7NpCpuUtilizationGroup The ciscoL4L7NpCpuUtilizationGroup is optional and gives the
CPU utilization of network processors.
optional ciscoL4L7ResourceRateLimitGroup This group is mandatory for those systems where
rate limiting is supported.
optional ciscoL4L7ResourceRateLimitUsageGroup This group is mandatory for those systems where
rate limiting is supported.
optional ciscoL4L7ResourceNotifEnabledGroup This group is mandatory for those systems which
implement resource limit notifications.
optional ciscoL4L7ResourceNotifGroup This group is mandatory for those systems which
implement resource limit notifications.
optional ciscoL4L7ResourceUsageSummaryGroup This group is mandatory for those systems which
implement resource limiting and/or rate limiting
of resource.

OID .1.3.6.1.4.1.9.9.480.3.1.6
The compliance statement for SNMP entities which implement
CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB.
Required groups
mandatory ciscoL4L7ResourceClassGroup
mandatory ciscoL4L7ResourceLimitGroup
mandatory ciscoL4L7ResourceLimitUsageGroup
mandatory ciscoL4L7BufferUtilizationGroupRev1
optional ciscoL4L7NpCpuUtilizationGroup The ciscoL4L7NpCpuUtilizationGroup is optional and gives the
CPU utilization of network processors.
optional ciscoL4L7ResourceRateLimitGroup This group is mandatory for those systems where
rate limiting is supported.
optional ciscoL4L7ResourceRateLimitUsageGroup This group is mandatory for those systems where
rate limiting is supported.
optional ciscoL4L7ResourceNotifEnabledGroup This group is mandatory for those systems which
implement resource limit notifications.
optional ciscoL4L7ResourceNotifGroup This group is mandatory for those systems which
implement resource limit notifications.
optional ciscoL4L7ResourceUsageSummaryGroup This group is mandatory for those systems which
implement resource limiting and/or rate limiting
of resource.

OID .1.3.6.1.4.1.9.9.480.3.1.7
The compliance statement for SNMP entities which implement
CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB.
Required groups
mandatory ciscoL4L7ResourceClassGroup
mandatory ciscoL4L7ResourceLimitGroup
mandatory ciscoL4L7ResourceLimitUsageGroup
mandatory ciscoL4L7BufferUtilizationGroupRev1
optional ciscoL4L7NpCpuUtilizationGroup The ciscoL4L7NpCpuUtilizationGroup is optional and gives the
CPU utilization of network processors.
optional ciscoL4L7ResourceRateLimitGroup This group is mandatory for those systems where
rate limiting is supported.
optional ciscoL4L7ResourceRateLimitUsageGroup This group is mandatory for those systems where
rate limiting is supported.
optional ciscoL4L7ResourceNotifEnabledGroup This group is mandatory for those systems which
implement resource limit notifications.
optional ciscoL4L7ResourceUsageSummaryGroup This group is mandatory for those systems which
implement resource limiting and/or rate limiting
of resource.
optional ciscoL4L7ResourceNotifOnlyObjectsGroup This group is mandatory for those systems which
implement ciscoL4L7ResourceNotifGroupRev1.

OID .1.3.6.1.4.1.9.9.480.3.1.8
The compliance statement for SNMP entities which implement
CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB.
Required groups
mandatory ciscoL4L7ResourceClassGroup
mandatory ciscoL4L7ResourceLimitGroup
mandatory ciscoL4L7ResourceLimitUsageGroup
mandatory ciscoL4L7BufferUtilizationGroupRev1
optional ciscoL4L7NpCpuUtilizationGroup The ciscoL4L7NpCpuUtilizationGroup is optional and gives the
CPU utilization of network processors.
optional ciscoL4L7ResourceRateLimitGroup This group is mandatory for those systems where
rate limiting is supported.
optional ciscoL4L7ResourceRateLimitUsageGroup This group is mandatory for those systems where
rate limiting is supported.
optional ciscoL4L7ResourceNotifEnabledGroup This group is mandatory for those systems which
implement resource limit notifications.
optional ciscoL4L7ResourceUsageSummaryGroup This group is mandatory for those systems which
implement resource limiting and/or rate limiting
of resource.
optional ciscoL4L7ResourceNotifOnlyObjectsGroup This group is mandatory for those systems which
implement ciscoL4L7ResourceNotifGroupRev1.
optional ciscoL4L7ResourceNotifOnlyObjectsGroupExt This group is mandatory for those systems which
implements ciscoL4L7ResourceNotifGroupRev2.
optional ciscoL4L7ResourceNotifGroupRev2 This group is optional and these traps indicates that configured
threshold is reached.
Notifications / Traps (6)
NameOIDDescription
.1.3.6.1.4.1.9.9.480.0.1
This notification is generated when the configured resource
limit value specified in 'crlResourceLimitMax' is reached
for a particular resource. This resource is identified by
'crlResourceLimitType' in ciscoL4L7ResourceLimitTable.
clrResourceLimitReached object is superseded by
clrResourceLimitReachedNotif.
.1.3.6.1.4.1.9.9.480.0.2
This notification is generated when the configured rate
limit value specified in 'crlRateLimitResourceMax' is reached
for a particular resource. This resource is identified by
'crlRateLimitResourceType' in ciscoL4L7ResourceRateLimitTable.
clrResourceRateLimitReached object is superseded by
clrResourceRateLimitReachedNotif.
.1.3.6.1.4.1.9.9.480.0.3
The notification will be generated when the current resource
usage identified by crlResourceLimitCurrentUsage exceeds/falls
below the user configured thresholds identified by
crlNotifMaxThresholdPcnt, crlNotifMinThresholdPcnt and
crlNotifWatermarkPcnt.
Notifications will be generated on the following conditions
1. crlResourceLimitCurrentUsage exceeds crlNotifMaxThresholdPcnt
2. crlResourceLimitCurrentUsage falls below high
crlNotifWatermarkPcnt
3. crlResourceLimitCurrentUsage falls below
crlNotifMinThresholdPcnt
4. crlResourceLimitCurrentUsage exceeds low
crlNotifWatermarkPcnt.
clrResourceLimitReachedNotif object is superseded by clrResourceLimitReachedNotifRev1.
.1.3.6.1.4.1.9.9.480.0.4
The notification will be generated when the current resource
rate usage identified by crlResourceRateLimitCurrentUsage
exceeds/falls below the user configured thresholds identified
by crlNotifMaxThresholdPcnt, crlNotifMinThresholdPcnt and
crlNotifWatermarkPcnt.
Notifications will be generated on the following conditions
1. crlResourceRateLimitCurrentUsage exceeds
crlNotifMaxThresholdPcnt
2. crlResourceRateLimitCurrentUsage falls below high
crlNotifWatermarkPcnt
3. crlResourceRateLimitCurrentUsage falls below
crlNotifMinThresholdPcnt
4. crlResourceRateLimitCurrentUsage exceeds low
crlNotifWatermarkPcnt
clrResourceRateLimitReachedNotif object is superseded by clrResourceRateLimitReachedNotifRev1.
.1.3.6.1.4.1.9.9.480.0.5
The notification will be generated when the current resource
usage rate identified by crlResourceRateLimitCurrentUsage
exceeds/falls below the user configured thresholds identified
by crlNotifMaxThresholdPcnt, crlNotifMinThresholdPcnt and
crlNotifWatermarkPcnt.
Notifications will be generated on the following conditions
1. crlResourceRateLimitCurrentUsage exceeds
crlNotifMaxThresholdPcnt
2. crlResourceRateLimitCurrentUsage falls below high
crlNotifWatermarkPcnt
3. crlResourceRateLimitCurrentUsage falls below
crlNotifMinThresholdPcnt
4. crlResourceRateLimitCurrentUsage exceeds low
crlNotifWatermarkPcnt
.1.3.6.1.4.1.9.9.480.0.6
The notification will be generated when the current resource
usage identified by crlResourceLimitCurrentUsage exceeds/falls
below the user configured thresholds identified by
crlNotifMaxThresholdPcnt, crlNotifMinThresholdPcnt and
crlNotifWatermarkPcnt.
Notifications will be generated on the following conditions
1. crlResourceLimitCurrentUsage exceeds crlNotifMaxThresholdPcnt
2. crlResourceLimitCurrentUsage falls below high
crlNotifWatermarkPcnt
3. crlResourceLimitCurrentUsage falls below
crlNotifMinThresholdPcnt
4. crlResourceLimitCurrentUsage exceeds low
crlNotifWatermarkPcnt.