CISCO-ITP-DSMR-UCP-MIB
The MIB for providing information about Distributed
Short Message Routing delivery using Universal
Computer Protocol.
Acronyms and Terms:
DSMR Distributed Short Message Routing
SMPP Short Message Peer-to-Peer (protocol)
SMD-PP Short Message Delivery Point to Point.
SMS Short Message Service
UCP Universal Computer Protocol.
WRR Weighted Round Robin. A variation of
the round robin algorithm that uses
server weights to allow uneven
distribution of traffic among a set
of available servers.
********************************************
- Source file
CISCO-ITP-DSMR-UCP-MIB- Last revised
- Identity
ciscoItpDsmrUcpMIB- Base OID
1.3.6.1.4.1.9.9.1302
Imported Objects
| CISCO-ITP-GSP-MIB | cgspCLLICode cgspEventSequenceNumber cgspInstNetwork |
| CISCO-ITP-MLR-MIB | CmlrName |
| CISCO-SMI | ciscoMgmt |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION (no object page) TruthValue |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-ITP-DSMR-UCP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-ITP-DSMR-UCP-MIB::ciscoItpDsmrUcpMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ITP-DSMR-UCP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ITP-DSMR-UCP-MIB::ciscoItpDsmrUcpMIB'
Objects (40)
Showing 40 of 40 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.9.9.1302 |
||
.1.3.6.1.4.1.9.9.1302.0 |
||
.1.3.6.1.4.1.9.9.1302.1 |
||
.1.3.6.1.4.1.9.9.1302.1.0 |
||
.1.3.6.1.4.1.9.9.1302.1.0.1 |
||
.1.3.6.1.4.1.9.9.1302.1.5 |
||
.1.3.6.1.4.1.9.9.1302.1.5.1 |
||
.1.3.6.1.4.1.9.9.1302.1.5.1.1 |
||
|
millisecondsCdsmrUcpInactivityTimer
|
.1.3.6.1.4.1.9.9.1302.1.5.1.2 |
|
|
millisecondsCdsmrUcpResponseTimer
|
.1.3.6.1.4.1.9.9.1302.1.5.1.3 |
|
|
bytesCdsmrUcpSendWindow
|
.1.3.6.1.4.1.9.9.1302.1.5.1.7 |
|
|
millisecondsCdsmrUcpSessionInitTimer
|
.1.3.6.1.4.1.9.9.1302.1.5.1.8 |
|
.1.3.6.1.4.1.9.9.1302.1.5.1.9 |
||
.1.3.6.1.4.1.9.9.1302.1.6 |
||
.1.3.6.1.4.1.9.9.1302.1.6.1 |
||
.1.3.6.1.4.1.9.9.1302.1.6.1.1 |
||
.1.3.6.1.4.1.9.9.1302.1.6.1.2 |
||
.1.3.6.1.4.1.9.9.1302.1.6.1.3 |
||
.1.3.6.1.4.1.9.9.1302.1.6.1.4 |
||
.1.3.6.1.4.1.9.9.1302.1.6.1.5 |
||
.1.3.6.1.4.1.9.9.1302.1.7 |
||
.1.3.6.1.4.1.9.9.1302.1.7.1 |
||
.1.3.6.1.4.1.9.9.1302.1.7.1.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.1302.1.7.1.10 |
|
|
requestsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.9.1302.1.7.1.11 |
|
|
requestsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.9.1302.1.7.1.12 |
|
|
responsesSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.9.1302.1.7.1.13 |
|
|
responsesSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.9.1302.1.7.1.14 |
|
.1.3.6.1.4.1.9.9.1302.1.7.1.15 |
||
|
millisecondsCdsmrUcpInactivityTimer
|
.1.3.6.1.4.1.9.9.1302.1.7.1.2 |
|
|
millisecondsCdsmrUcpResponseTimer
|
.1.3.6.1.4.1.9.9.1302.1.7.1.3 |
|
|
bytesCdsmrUcpSendWindow
|
.1.3.6.1.4.1.9.9.1302.1.7.1.4 |
|
|
millisecondsCdsmrUcpSessionInitTimer
|
.1.3.6.1.4.1.9.9.1302.1.7.1.5 |
|
.1.3.6.1.4.1.9.9.1302.1.7.1.6 |
||
.1.3.6.1.4.1.9.9.1302.1.7.1.7 |
||
.1.3.6.1.4.1.9.9.1302.1.7.1.8 |
||
.1.3.6.1.4.1.9.9.1302.1.7.1.9 |
||
.1.3.6.1.4.1.9.9.1302.2 |
||
.1.3.6.1.4.1.9.9.1302.2.1 |
||
.1.3.6.1.4.1.9.9.1302.2.2 |
Dependencies (14) 7 direct · 7 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CISCO-SMIcisco
- SNMPv2-TCrfc
- CISCO-ITP-TC-MIBcisco
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- INET-ADDRESS-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- CISCO-ITP-GSP-MIBcisco
- CISCO-TCcisco
- CISCO-ITP-GSCCP-MIBcisco
- CISCO-ITP-MLR-MIBcisco
- CISCO-ITP-DSMR-UCP-MIBciscoselected
Type Definitions (4)
| Unsigned32 |
range: 0range: 1000..9000000 |
|
| Unsigned32 |
range: 0range: 1000..10000 |
|
| Unsigned32 |
range: 0..100 |
|
| Unsigned32 |
range: 0range: 500..120000 |
Conformance Groups (2)
|
cdsmrUcpSessionStateNotifEnabled cdsmrUcpProfileInactivityTimer cdsmrUcpProfileResponseTimer cdsmrUcpProfileSendWindow cdsmrUcpProfileSessionInitTimer cdsmrUcpProfileRowStatus cdsmrUcpSessionLocalIpAddrType cdsmrUcpSessionLocalIpAddress cdsmrUcpSessionDynamicDest cdsmrUcpSessionRowStatus cdsmrUcpDestInactivityTimer cdsmrUcpDestResponseTimer cdsmrUcpDestSendWindow cdsmrUcpDestSessionInitTimer cdsmrUcpDestRemotePortNumber cdsmrUcpDestRemoteIpAddrType cdsmrUcpDestRemoteIpAddress cdsmrUcpDestProfileName cdsmrUcpDestState cdsmrUcpDestSentRequests cdsmrUcpDestRcvdRequests cdsmrUcpDestSentResponses cdsmrUcpDestRcvdResponses cdsmrUcpDestRowStatus
A collection of objects providing information used to
configure UCP profile and notifications. |
.1.3.6.1.4.1.9.9.1302.2.2.1
|
|
|
DSMR Universal Computer Protocol notification objects.
|
.1.3.6.1.4.1.9.9.1302.2.2.2
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.9.9.1302.2.1.1The compliance statement for entities which implement
the Cisco CISCO-ITP-MLR-MIB
the Cisco CISCO-ITP-MLR-MIB
Required groups
| mandatory | ciscoItpDsmrUcpGroup | |
| mandatory | ciscoItpDsmrUcpNotificationsGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| cdsmrUcpProfileInactivityTimer | readonly | Create/Write access is not required. | |
| cdsmrUcpProfileResponseTimer | readonly | Create/Write access is not required. | |
| cdsmrUcpProfileSendWindow | readonly | Create/Write access is not required. | |
| cdsmrUcpProfileSessionInitTimer | readonly | Create/Write access is not required. | |
| cdsmrUcpProfileRowStatus | readonly | Create/Write access is not required. | |
| cdsmrUcpSessionLocalIpAddrType | readonly | Create/Write access is not required. | |
| cdsmrUcpSessionLocalIpAddress | readonly | Create/Write access is not required. | |
| cdsmrUcpSessionDynamicDest | readonly | Create/Write access is not required. | |
| cdsmrUcpSessionRowStatus | readonly | Create/Write access is not required. | |
| cdsmrUcpDestInactivityTimer | readonly | Create/Write access is not required. | |
| cdsmrUcpDestResponseTimer | readonly | Create/Write access is not required. | |
| cdsmrUcpDestSendWindow | readonly | Create/Write access is not required. | |
| cdsmrUcpDestSessionInitTimer | readonly | Create/Write access is not required. | |
| cdsmrUcpDestRemotePortNumber | readonly | Create/Write access is not required. | |
| cdsmrUcpDestRemoteIpAddrType | readonly | Create/Write access is not required. | |
| cdsmrUcpDestRemoteIpAddress | readonly | Create/Write access is not required. | |
| cdsmrUcpDestProfileName | readonly | Create/Write access is not required. | |
| cdsmrUcpDestRowStatus | readonly | Create/Write access is not required. |
Notifications / Traps (1)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.9.9.1302.0.1 |
This notification is generated whenever SMPP destination
changes state. This notification provides information on the availablity of the destination to receive and process packets using the UCP protocol. |