CISCO-ITP-ACL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
31

cItpAclTable

table
.1.3.6.1.4.1.9.9.227.1.2.1 · 1 row entry · 31 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cItpAclTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ITP-ACL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ITP-ACL-MIB::cItpAclTable' 
A table of SP access controls. The access control
definition controls which packets are accepted or
rejected. The access control may be applied before
sending the packet to the routing table or may be
applied after the packet is processed by the routing
table. Entries are added to this table via
cItpAclRowStatus in accordance with the RowStatus
convention.
cItpAclTableEntry row .1.3.6.1.4.1.9.9.227.1.2.1.1
A list of Signalling Point access control attributes.
Indexes
Column Syntax OID
cItpAclId
The identifier used to select a list of access list
entries. The administrator will select an valid
identifier within the specified range defined for
SS7 access lists.
CISCO-ITP-TC-MIBCItpTcAclId
Type Constraints:
range: 0
range: 2700..2999
 .1.3.6.1.4.1.9.9.227.1.2.1.1.1
cItpAclEntryType
The list of possible entry types.
'comments' : A statement used to describe and document
access list entries.
'entry' : A access list entry.
Enumeration
Enumerated Values:
1comment
2entry
 .1.3.6.1.4.1.9.9.227.1.2.1.1.2
cItpAclEntryNumber
An numeric value assigned to each access list entry.
The entries of the same type must be unique. Entries
will be tested in ascending order.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.9.227.1.2.1.1.3
cItpAclAction
The action to be performed on the packet that matched
this access control.
CItpAclActionr/w
Type Values:
1accept
2discard
 .1.3.6.1.4.1.9.9.227.1.2.1.1.4
cItpAclParameters
The cItpAclType object indicates which types of tests
will be processed on the each access list entry.
Each may contain one or more filters. The filter will
be processed ascending order(si,dpc...all). Each test
is eva…
Bitsr/w
Enumerated Values:
0si
1dpc
2dpcMask
3opc
4opcMask
5pattern
6comment
7cgpa
8cgpaMask
9cdpa
10cdpaMask
11selector
12aft
13aftMask
14all
 .1.3.6.1.4.1.9.9.227.1.2.1.1.5
cItpAclDpc
The destination point code specified for this ACL. The
'dpc' bit in the cItpAclParameters object is used
indicate whether this object has been specified.
CISCO-ITP-TC-MIBCItpTcPointCoder/w
Type Constraints:
range: 0..16777216
 .1.3.6.1.4.1.9.9.227.1.2.1.1.6
cItpAclDpcMask
The mask used to define which part of the point code
in the packet is significant when comparing the
destination point code with cItpAclDpc. The
'dpcMask' bit in the cItpAclParameters object is used
indicate whether…
CISCO-ITP-TC-MIBCItpTcPointCodeMaskr/w
Type Constraints:
range: 0..16777216
 .1.3.6.1.4.1.9.9.227.1.2.1.1.7
cItpAclOpc
The origin point code specified in this ACL. The
'opc' bit in the cItpAclParameters object is used
indicate whether this object has been specified.
CISCO-ITP-TC-MIBCItpTcPointCoder/w
Type Constraints:
range: 0..16777216
 .1.3.6.1.4.1.9.9.227.1.2.1.1.8
cItpAclOpcMask
The mask used to define which part of the origin
point code in the packet is significant when comparing
the origin point code with cItpAclDpc. The
'opcMask' bit in the cItpAclParameters object is used
indicate whethe…
CISCO-ITP-TC-MIBCItpTcPointCodeMaskr/w
Type Constraints:
range: 0..16777216
 .1.3.6.1.4.1.9.9.227.1.2.1.1.9
cItpAclSi
The Service Indicator Octet. The 'si' bit in the
cItpAclParameters object is used indicate whether
this object has been specified.
CISCO-ITP-TC-MIBCItpTcServiceIndicatorr/w
Type Values:
0snmm
1sntm
2spare2
3sccp
4tup
5isup
6dupc
7dupf
8mtup
9bisup
10sisup
11spare11
12spare12
13spare13
14spare14
15spare15
 .1.3.6.1.4.1.9.9.227.1.2.1.1.10
cItpAclPattern
The pattern used to match a packet at offset
cItpAclOffset. The 'pattern' bit in the
cItpAclParameters object is used indicate whether
this object has been specified.
OctetStringr/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.9.9.227.1.2.1.1.11
cItpAclOffset
The offset into the packet were we begin matching the
pattern specified by cItpAclPattern is to start. The
'pattern' bit in the cItpAclParameters object is used
indicate whether this object has been specified.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.227.1.2.1.1.12
cItpAclComment
A brief description used to document access list
entries. The 'comment' bit in the cItpAclParameters
object is used indicate whether this object has been
specified.
OctetStringr/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.9.9.227.1.2.1.1.13
cItpAclCgpa
The Calling Party Point Code. The 'cgpa' bit in the
cItpAclParameters object is used indicate whether this
object has been specified.
CISCO-ITP-TC-MIBCItpTcPointCoder/w
Type Constraints:
range: 0..16777216
 .1.3.6.1.4.1.9.9.227.1.2.1.1.14
cItpAclCgpaMask
The Calling Party Point Code mask. The 'cgpaMask' bit
in the cItpAclParameters object is used indicate
whether this object has been specified.
CISCO-ITP-TC-MIBCItpTcPointCodeMaskr/w
Type Constraints:
range: 0..16777216
 .1.3.6.1.4.1.9.9.227.1.2.1.1.15
cItpAclCgpaSsn
The Calling Party Point Code subsystem number. The
'cgpa' bit in the cItpAclParameters object is used
indicate whether this object has been specified.
CISCO-ITP-TC-MIBCItpTcSubSystemNumberr/w
Type Constraints:
range: 0
range: 2..255
 .1.3.6.1.4.1.9.9.227.1.2.1.1.16
cItpAclCgpaSsnMask
The Calling Party Point Code subsystem number Mask.
The 'cgpa' bit in the cItpAclParameters object is used
indicate whether this object has been specified.
CISCO-ITP-TC-MIBCItpTcSubSystemNumberMaskr/w
Type Constraints:
range: 2..255
 .1.3.6.1.4.1.9.9.227.1.2.1.1.17
cItpAclCdpa
The Called Party Point Code. The 'cdpa' bit in the
cItpAclParameters object is used indicate whether this
object has been specified.
CISCO-ITP-TC-MIBCItpTcPointCoder/w
Type Constraints:
range: 0..16777216
 .1.3.6.1.4.1.9.9.227.1.2.1.1.18
cItpAclCdpaMask
The Called Party Point Code mask. The 'cdpaMask' bit
in the cItpAclParameters object is used indicate
whether this object has been specified.
CISCO-ITP-TC-MIBCItpTcPointCodeMaskr/w
Type Constraints:
range: 0..16777216
 .1.3.6.1.4.1.9.9.227.1.2.1.1.19
cItpAclCdpaSsn
The Called Party Point Code subsystem number. The
'cdpa' bit in the cItpAclParameters object is used
indicate whether this object has been specified.
CISCO-ITP-TC-MIBCItpTcSubSystemNumberr/w
Type Constraints:
range: 0
range: 2..255
 .1.3.6.1.4.1.9.9.227.1.2.1.1.20
cItpAclCdpaSsnMask
The Called Party Point Code subsystem number Mask. The
'cdpa' bit in the cItpAclParameters object is used
indicate whether this object has been specified.
CISCO-ITP-TC-MIBCItpTcSubSystemNumberMaskr/w
Type Constraints:
range: 2..255
 .1.3.6.1.4.1.9.9.227.1.2.1.1.21
cItpAclGtiSelector
The Global Title Selector. The 'selector' bit in the
cItpAclParameters object is used indicate whether this
object has been specified.
CISCO-ITP-TC-MIBCItpTcGlobalTitleSelectorr/w
Type Values:
1nai
2tt
3ttNpEs
4ttNpNaiEs
 .1.3.6.1.4.1.9.9.227.1.2.1.1.22
cItpAclGtiTranslateType
The Global Title Translate Type. The 'selector' bit in
the cItpAclParameters object is used indicate whether
this object has been specified.
CISCO-ITP-TC-MIBCItpTcTranslationTyper/w
Type Values:
1tt
2ssn
 .1.3.6.1.4.1.9.9.227.1.2.1.1.23
cItpAclGtiNumberingPlan
The Global Title Numbering Plan. The 'selector' bit in
the cItpAclParameters object is used indicate whether
this object has been specified.
CISCO-ITP-TC-MIBCItpTcNumberingPlanr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.227.1.2.1.1.24
cItpAclGtiNai
The Global Title nature of address indicator. The
'selector' bit in the cItpAclParameters object is
used indicate whether this object has been
specified.
CISCO-ITP-TC-MIBCItpTcNAIr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.227.1.2.1.1.25
cItpAclGtiEsv
The Global Title encoding scheme value. The
'selector' bit in the cItpAclParameters object is
used indicate whether this object has been
specified.
CISCO-ITP-TC-MIBCItpTcEncodingSchemeValuer/w
Type Constraints:
range: 0..15
 .1.3.6.1.4.1.9.9.227.1.2.1.1.26
cItpAclAft
The Affected Point Code. The 'aft' bit in the
cItpAclParameters object is used indicate whether
this object has been specified.
CISCO-ITP-TC-MIBCItpTcPointCoder/w
Type Constraints:
range: 0..16777216
 .1.3.6.1.4.1.9.9.227.1.2.1.1.27
cItpAclAftMask
The Affected Point Code mask. The 'aftMask' bit in the
cItpAclParameters object is used indicate whether
this object has been specified.
CISCO-ITP-TC-MIBCItpTcPointCodeMaskr/w
Type Constraints:
range: 0..16777216
 .1.3.6.1.4.1.9.9.227.1.2.1.1.28
cItpAclAftSsn
The Affected Point Code subsystem number. The 'aft'
bit in the cItpAclParameters object is used indicate
whether this object has been specified.
CISCO-ITP-TC-MIBCItpTcSubSystemNumberr/w
Type Constraints:
range: 0
range: 2..255
 .1.3.6.1.4.1.9.9.227.1.2.1.1.29
cItpAclAftSsnMask
The Affected Point Code subsystem number Mask. The
'aft' bit in the cItpAclParameters object is used
indicate whether this object has been specified.
CISCO-ITP-TC-MIBCItpTcSubSystemNumberMaskr/w
Type Constraints:
range: 2..255
 .1.3.6.1.4.1.9.9.227.1.2.1.1.30
cItpAclRowStatus
The object is used by a management station to
create or delete the row entry in cItpAcl
following the RowStatus textual convention.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.227.1.2.1.1.31