CISCO-ISDN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
17

demandNbrTable

table
.1.3.6.1.4.1.9.9.26.1.1.1 · 1 row entry · 17 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk demandNbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ISDN-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ISDN-MIB::demandNbrTable' 
The list of neighbors from which the router will accept calls or
to which it will place them.
demandNbrEntry row .1.3.6.1.4.1.9.9.26.1.1.1.1
A single Neighbor. This entry is effectively permanent, and contains
information describing the neighbor, his permissions, his last call
attempt, and his cumulative effects.
Indexes
Column Syntax OID
demandNbrPhysIf
ifIndex value of the physical interface the neighbor will be
called on. On an ISDN interface, this is the ifIndex value of
the D channel.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.9.9.26.1.1.1.1.1
demandNbrId
arbitrary sequence number associated with the neighbor.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.26.1.1.1.1.2
demandNbrLogIf
ifIndex value of virtual interface associated with the neighbor.
This interface maintains a queue of messages holding for the neighbor
awaiting call completion, and all statistics.
Integer32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.9.9.26.1.1.1.1.3
demandNbrName
ASCII name of the neighbor.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.9.9.26.1.1.1.1.4
demandNbrAddress
Call Address at which the neighbor should be called.
Think of this as the set of characters following 'ATDT '
or the 'phone number' included in a D channel call request.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.9.9.26.1.1.1.1.5
demandNbrPermission
applicable permissions.
Enumerationr/w
Enumerated Values:
1iCanCallHim
2heCanCallMe
3weCanCallEachOther
 .1.3.6.1.4.1.9.9.26.1.1.1.1.6
demandNbrMaxDuration
Maximum call duration in seconds.
secondsInteger32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.9.9.26.1.1.1.1.7
demandNbrLastDuration
Duration of last call in seconds.
secondsInteger32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.9.9.26.1.1.1.1.8
demandNbrClearReason
ASCII reason that the last call terminated.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.9.9.26.1.1.1.1.9
demandNbrClearCode
encoded reason for the last call tear down.
OctetString .1.3.6.1.4.1.9.9.26.1.1.1.1.10
demandNbrSuccessCalls
number of completed calls to neighbor since system reset.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.26.1.1.1.1.11
demandNbrFailCalls
Number of call attempts that have failed.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.26.1.1.1.1.12
demandNbrAcceptCalls
Number of calls accepted from the neighbor.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.26.1.1.1.1.13
demandNbrRefuseCalls
Number of calls from neighbor that we have refused.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.26.1.1.1.1.14
demandNbrLastAttemptTime
sysUpTime of last call attempt.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.9.26.1.1.1.1.15
demandNbrStatus
Somebody might want to manage the device using SNMP some day...
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.26.1.1.1.1.16
demandNbrCallOrigin
Indication of outgoing or incoming call.
Enumeration
Enumerated Values:
1originate
2answer
3callback
 .1.3.6.1.4.1.9.9.26.1.1.1.1.17