CISCO-IP-STAT-MIB

Monitored by Observium
         Cisco IP Statistics MIB - Overview
        
This MIB incorporates objects to provide support for the Cisco IP
statistics as implemented in command interfaces
        
ip accounting [ mac-address {input | ouput } |
		   precedence { input | ouput } ]
        
The above CLI provides additional IP statistics categorized by
precedence of IP packets, as well as the MAC address associated
with IP packets.  This is a supplement to those defined in
OLD-CISCO-IP-MIB.my.
    
Observium actively monitors this MIB
Observium uses this MIB in discovery or polling workflows on applicable devices.
Discovery Polling
Explore Observium network monitoring
Source file
CISCO-IP-STAT-MIB
Last revised
Identity
ciscoIpStatMIB
Base OID
1.3.6.1.4.1.9.9.84
Imported Objects
CISCO-SMI ciscoMgmt
IF-MIB ifIndex
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Counter64 Gauge32 Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC MacAddress TEXTUAL-CONVENTION (no object page)
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-IP-STAT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-IP-STAT-MIB::ciscoIpStatMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IP-STAT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IP-STAT-MIB::ciscoIpStatMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (31)
4 directly used by Observium
.1.3.6.1.4.1.9.9.84
.1.3.6.1.4.1.9.9.84.1
.1.3.6.1.4.1.9.9.84.1.1
.1.3.6.1.4.1.9.9.84.1.1.1
.1.3.6.1.4.1.9.9.84.1.1.1.1
.1.3.6.1.4.1.9.9.84.1.1.1.1.1
Integer32
.1.3.6.1.4.1.9.9.84.1.1.1.1.2
.1.3.6.1.4.1.9.9.84.1.1.1.1.3
.1.3.6.1.4.1.9.9.84.1.1.1.1.4
.1.3.6.1.4.1.9.9.84.1.1.2
.1.3.6.1.4.1.9.9.84.1.1.2.1
.1.3.6.1.4.1.9.9.84.1.1.2.1.1
.1.3.6.1.4.1.9.9.84.1.1.2.1.2
.1.3.6.1.4.1.9.9.84.1.2
.1.3.6.1.4.1.9.9.84.1.2.1
.1.3.6.1.4.1.9.9.84.1.2.1.1
.1.3.6.1.4.1.9.9.84.1.2.1.1.1
.1.3.6.1.4.1.9.9.84.1.2.1.1.2
.1.3.6.1.4.1.9.9.84.1.2.1.1.3
.1.3.6.1.4.1.9.9.84.1.2.1.1.4
.1.3.6.1.4.1.9.9.84.1.2.2
.1.3.6.1.4.1.9.9.84.1.2.2.1
.1.3.6.1.4.1.9.9.84.1.2.2.1.1
.1.3.6.1.4.1.9.9.84.1.2.2.1.2
.1.3.6.1.4.1.9.9.84.1.2.3
.1.3.6.1.4.1.9.9.84.1.2.3.1
.1.3.6.1.4.1.9.9.84.1.2.3.1.1
.1.3.6.1.4.1.9.9.84.1.2.3.1.2
.1.3.6.1.4.1.9.9.84.3
.1.3.6.1.4.1.9.9.84.3.1
.1.3.6.1.4.1.9.9.84.3.2
Dependencies (7) 5 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCO-SMIcisco
  3. SNMPv2-TCrfc
  4. IANAifType-MIBrfc
  5. SNMPv2-CONFrfc
  6. SNMPv2-MIBrfc
  7. IF-MIBrfc
  8. CISCO-IP-STAT-MIBciscoselected
Type Definitions (1)
Enumeration
input(1)
output(2)
Conformance Groups (2)
A collection of objects providing IP Statistics
monitoring.
For interfaces that operate at speeds greater than
20,000,000 bits/second, it is recommended that the HC
counters in the optional compliance section be supported
and used.
.1.3.6.1.4.1.9.9.84.3.2.1
A collection of objects providing IP Statistics
monitoring. This is recommended for high speed (high
speed interfaces transmit and receive at speeds over
20,000,000 bits/second) network interfaces.
.1.3.6.1.4.1.9.9.84.3.2.2
Compliance Statements (2)

OID .1.3.6.1.4.1.9.9.84.3.1.1
The compliance statement for entities which implement
the IP Statistics on a Cisco router.
Required groups

OID .1.3.6.1.4.1.9.9.84.3.1.2
The compliance statement for entities which implement
the IP Statistics on a Cisco router.
This deprecates ciscoIpStatMIBCompliance to provide
64-bit versions of packet and byte counter objects.
Required groups
mandatory ciscoIpStatMIBGroup
optional ciscoIpStatHCMIBGroup This group is recommended for high speed
(high speed interfaces transmit and receive at
speeds over 20,000,000 bits/second) network
interfaces.