CISCO-IP-RAN-BACKHAUL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
16
Rows
16
Columns
153
.1.3.6.1.4.1.9.9.483.1.2.1.1.1 · 1 row entry · 13 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cirbhInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IP-RAN-BACKHAUL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IP-RAN-BACKHAUL-MIB::cirbhInfoTable'
This table provides information on interface used to
establish shorthaul connection to BTS or BSC or node
B site.
cirbhInfoTableEntry row .1.3.6.1.4.1.9.9.483.1.2.1.1.1.1
Each entry describes the information used to route
GSM and UMTS packets across backhaul for a single
GSM or UMTS link.
Indexes
Column Syntax OID
Protocol used to indicate type of shorthaul.
CirbhProtocol
Type Values:
1undefined
2gsmAbis
3umtsIub
.1.3.6.1.4.1.9.9.483.1.2.1.1.1.1.1
The type of address specified in the corresponding instance
of cirbhConfigLocalIpAddr object.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.9.9.483.1.2.1.1.1.1.2
The local address used to route traffic across backhaul.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.483.1.2.1.1.1.1.3
The local port number used to distinguish traffic from this
interface when transported over backhaul connection.
INET-ADDRESS-MIBInetPortNumber
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.9.9.483.1.2.1.1.1.1.4
The type of address in the in the corresponding instance of
the cirbhInfoRemoteAddr object.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.9.9.483.1.2.1.1.1.1.5
The remote IP address used to route traffic across backhaul.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.483.1.2.1.1.1.1.6
The remote port number used to distinguish traffic
from this interface when transported over backhaul
connection.
INET-ADDRESS-MIBInetPortNumber
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.9.9.483.1.2.1.1.1.1.7
This object provides the serial number of the adjacent
device supporting the other side of this shorthaul. This object
contains the same value as the corresponding
entPhysicalSerialNum object on the adjacent device. Th…
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.483.1.2.1.1.1.1.8
This object provides the vendor type of the adjacent
device supporting other end of this shorthaul. This
objectcontains the same value as the corresponding
entPhysicalVendorType object on the adjacent device.
SNMPv2-TCAutonomousType
Description:
Represents an independently extensible type identification
value. It may, for example, indicate a particular sub-tree
with further MIB definitions, or define a particular type of
protocol or hardware.
.1.3.6.1.4.1.9.9.483.1.2.1.1.1.1.9
This object provides the ifIndex of the interface
used to receive traffic from destination.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
.1.3.6.1.4.1.9.9.483.1.2.1.1.1.1.10
This object provides the ifIndex of the interface
used to sent traffic to destination.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
.1.3.6.1.4.1.9.9.483.1.2.1.1.1.1.11
The latest value of the cirbhShortHaulBulkHistory object
from the cirbhShortHaulBulkHistory table.
CirbhHistoryIndex
Type Constraints:
range: 1..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.1.1.1.12
This object indicate whether the traffic received and sent for
this shorthaul interface is optimized.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.483.1.2.1.1.1.1.13
.1.3.6.1.4.1.9.9.483.1.2.1.2.1 · 1 row entry · 4 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cirbhGsmAlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IP-RAN-BACKHAUL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IP-RAN-BACKHAUL-MIB::cirbhGsmAlarmTable'
This table provides alarm information for GSM-Abis
interfaces.
cirbhGsmAlarmTableEntry row .1.3.6.1.4.1.9.9.483.1.2.1.2.1.1
Each entry represents the set of alarms that apply to
GSM interface.
Indexes
Column Syntax OID
The state of the connection for GSM interface.
CirbhConnectGsmState
Type Values:
1connected
2disconnected
3sendConnect
4recConnect
5connectedRej
6ackConnect
7connectedCheck
.1.3.6.1.4.1.9.9.483.1.2.1.2.1.1.1
The local alarm state.
CirbhAlarmState
Type Values:
1blue
2green
3red
4yellow
5unavailable
.1.3.6.1.4.1.9.9.483.1.2.1.2.1.1.2
The remote alarm state.
CirbhAlarmState
Type Values:
1blue
2green
3red
4yellow
5unavailable
.1.3.6.1.4.1.9.9.483.1.2.1.2.1.1.3
The redundancy state of the interface
CirbhRedundancyState
Type Values:
1active
2standby
.1.3.6.1.4.1.9.9.483.1.2.1.2.1.1.4
.1.3.6.1.4.1.9.9.483.1.2.1.2.2 · 1 row entry · 3 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cirbhUmtsConnectionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IP-RAN-BACKHAUL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IP-RAN-BACKHAUL-MIB::cirbhUmtsConnectionTable'
This table provides information associated with
UMTS connection between BTS and BSC.
cirbhUmtsConnectionTableEntry row .1.3.6.1.4.1.9.9.483.1.2.1.2.2.1
Each Entry represents the set of alarms that apply to
UMTS interfaces.
Indexes
Column Syntax OID
The state of the connection between the UMTS
interfaces.
CirbhConnectUmtsState
Type Values:
1init
2starting
3closed
4stopped
5closing
6stopping
7connectSent
8ackReceived
9ackSent
10open
.1.3.6.1.4.1.9.9.483.1.2.1.2.2.1.1
The redundancy state of the interface.
CirbhRedundancyState
Type Values:
1active
2standby
.1.3.6.1.4.1.9.9.483.1.2.1.2.2.1.2
The root interface used to transport
and receive UMTS traffic as follows.

ATM:
ATM0/0.0-aal5 layer -> ATM0/0-atm layer.

IMA
ATM0/IMA0.1-aal5 layer -> ATM0/IMA0
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
.1.3.6.1.4.1.9.9.483.1.2.1.2.2.1.3
.1.3.6.1.4.1.9.9.483.1.2.1.2.3 · 1 row entry · 4 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cirbhUmtsAlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IP-RAN-BACKHAUL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IP-RAN-BACKHAUL-MIB::cirbhUmtsAlarmTable'
This table provides information on alarm states for
UMTS-ATM interfaces.
cirbhUmtsAlarmTableEntry row .1.3.6.1.4.1.9.9.483.1.2.1.2.3.1
Each entry provides information about the alarms for
each ATM interface used to configure the shorthaul
UMTS interface.
Indexes
Column Syntax OID
The local receive alarm state.
CirbhAlarmState
Type Values:
1blue
2green
3red
4yellow
5unavailable
.1.3.6.1.4.1.9.9.483.1.2.1.2.3.1.1
The remote receive alarm state.
CirbhAlarmState
Type Values:
1blue
2green
3red
4yellow
5unavailable
.1.3.6.1.4.1.9.9.483.1.2.1.2.3.1.2
The local transmit alarm state.
CirbhAlarmState
Type Values:
1blue
2green
3red
4yellow
5unavailable
.1.3.6.1.4.1.9.9.483.1.2.1.2.3.1.3
The remote transmit alarm state.
CirbhAlarmState
Type Values:
1blue
2green
3red
4yellow
5unavailable
.1.3.6.1.4.1.9.9.483.1.2.1.2.3.1.4
.1.3.6.1.4.1.9.9.483.1.2.1.3.1 · 1 row entry · 6 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cirbhStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IP-RAN-BACKHAUL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IP-RAN-BACKHAUL-MIB::cirbhStatsTable'
This table provides measurements on bytes and
packets sent or received on a per interface basis.
It is important to note that this table shares the
same index with the cirbhInfoTable table the ifIndex
can be used to associate information from both tables.
cirbhStatsTableEntry row .1.3.6.1.4.1.9.9.483.1.2.1.3.1.1
This entry provides measurements on shorthaul
interfaces to allow compression efficency to be
calculated.
Indexes
Column Syntax OID
For GSM-Abis interfaces, the count of samples received on
interface. For UMTS interfaces, the number of packets received
on interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.1.1.1
For GSM-Abis interfaces, the count of samples sent on
interface. For UMTS interfaces, the number of packets sent
on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.1.1.2
The count of packets received from backhaul that contained
data for this interface.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.1.1.3
The count of packets transmitted on backhaul that contained
data from this interface.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.1.1.4
The count of bytes received from backhaul that contained
data for this interface.
bytesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.1.1.5
The count of bytes transmitted on backhaul that contained
data from this interface.
bytesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.1.1.6

cirbhErrorsTable

table deprecated
.1.3.6.1.4.1.9.9.483.1.2.1.3.2 · 1 row entry · 17 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cirbhErrorsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IP-RAN-BACKHAUL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IP-RAN-BACKHAUL-MIB::cirbhErrorsTable'
This table provides information on the errors that
can be encountered during the compression and
decompression of UMTS and GSM-Abis traffic.
          
  UMTS
-------------------
                  |
  GSM Links    --------
 --------------|      | IP based Multi-link(backhaul)
 --------------|      |-----------------------------
 --------------|      |-----------------------------
               --------
cirbhErrorsTableEntry row .1.3.6.1.4.1.9.9.483.1.2.1.3.2.1
Each entry provides account of various types of
errors encountered on GSM and UMTS interfaces.
Indexes
Column Syntax OID
The count of packets dropped on backhaul because peer was
not ready.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.1
The count of packets dropped on backhaul because peer was
reachable but not in active state.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.2
The number of backhaul packets that were received and dropped
because they contained invalid information.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.3
The number of backhaul packets expected to be received but
never arrived.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.4
The number of backhaul packets sent but never were
received by peer.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.5
The value of this object is the sum total of the values of
the corresponding instances of the following objects:

cirbhErrorsBhMissedLatePackets
cirbhErrorsBhMissedLostPackets
cirbhErrorsBhMissedNoMemPacke…
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.6
The number of packets missed on backhaul because they
arrived past the allowed time frame.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.7
The number of packets missed on backhaul because they
were lost on backhaul.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.8
The number of packets missed on backhaul for lack of
available memory to allocate packet.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.9
The number of packets missed on backhaul because the of a
reset event.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.10
The number of times information contained in
packet could not be decompressed.
failuresSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.11
The number of times the information contained in the
packet could not be compressed. This counter is
incremented for all types of compression errors.
failuresSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.12
The number of times compression failed because
packet was unavailable.
failuresSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.13
The number of times compression failed because
route to peer was not available.
failuresSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.14
The number of times compression failed because
interface was down.
failuresSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.15
The number of times compression failed because of
encapsulation errors.
failuresSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.16
The number of times compression failed because
of quality of service errors or traffic load.
dropsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.2.1.17
.1.3.6.1.4.1.9.9.483.1.2.1.3.3 · 1 row entry · 8 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cirbhShortHaulHistoryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IP-RAN-BACKHAUL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IP-RAN-BACKHAUL-MIB::cirbhShortHaulHistoryTable'
This table provides historical information on the amount of
backhaul traffic contributed by each interface.
cirbhShortHaulHistoryTableEntry row .1.3.6.1.4.1.9.9.483.1.2.1.3.3.1
Each entry represents the average traffic for last second.
Each entry provides information on traffic rates for raw
and compressed data.
Column Syntax OID
An index used to access history of
cirbhShortHaulHistoryTable objects.
CirbhHistoryIndex
Type Constraints:
range: 1..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.3.1.1
The rate of traffic received from this interface to be sent
on backhaul prior to compression.
bytes/secondCirbhRawInterfaceRate
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.3.1.2
The rate of traffic sent out from this interface after
traffic was decompressed.
bytes/secondCirbhRawInterfaceRate
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.3.1.3
The rate of traffic received into this interface to be sent
on backhaul after compression.
bytes/secondCirbhCommpressInterfaceRate
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.3.1.4
The rate of traffic received from backhaul and prior to
decompression.
bytes/secondCirbhCommpressInterfaceRate
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.3.1.5
Time when sample was collected.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.9.9.483.1.2.1.3.3.1.6
Amount of traffic that was receive from backhaul before
decompression express as load on E1 or T1.
percent of DS loadCirbhShortHaulUtilization
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.483.1.2.1.3.3.1.7
Amount of traffic that was send on after
compression express as load on E1 or T1.
percent of DS loadCirbhShortHaulUtilization
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.483.1.2.1.3.3.1.8
.1.3.6.1.4.1.9.9.483.1.2.1.3.4 · 1 row entry · 6 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cirbhCongestionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IP-RAN-BACKHAUL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IP-RAN-BACKHAUL-MIB::cirbhCongestionTable'
This table provides information on congestion
mechanism for shorthaul interfaces.
cirbhCongestionTableEntry row .1.3.6.1.4.1.9.9.483.1.2.1.3.4.1
Each entry represents single shorthaul interface.
Indexes
Column Syntax OID
This object indicates congestion mechanisms have been
enabled for shorthaul interface.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.483.1.2.1.3.4.1.1
This object provide the number packets or cells
that were dropped due to congestion. When the
cirbhInfoProtocol is 'gsmAbis' object indicates the
number of packets dropped. When the cirbhInfoProtocol
is 'umtsIub' obje…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.4.1.2
The number of bytes dropped due to congestion
control mechanisms.
bytesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.4.1.3
The number of times congestion mechanism was engaged.
occurencesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.4.1.4
This object indicates whether congestion mechanism is
active.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.483.1.2.1.3.4.1.5
This object provides number of seconds interface was
congested.
secondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.4.1.6
.1.3.6.1.4.1.9.9.483.1.2.1.3.5 · 1 row entry · 25 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cirbhGsmErrorsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IP-RAN-BACKHAUL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IP-RAN-BACKHAUL-MIB::cirbhGsmErrorsTable'
This table provides information on the errors that
can be encountered during the compression and
decompression of GSM-Abis traffic.
cirbhGsmErrorsTableEntry row .1.3.6.1.4.1.9.9.483.1.2.1.3.5.1
Each entry represents single shorthaul interface.
Indexes
Column Syntax OID
The count of packets dropped on backhaul because peer was
not ready.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.1
The count of packets dropped on backhaul because peer was
reachable but not in active state.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.2
The number of backhaul packets that were received and dropped
because they contained invalid information.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.3
The number of backhaul packets expected to be received but
never arrived.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.4
The number of backhaul packets sent but never were
received by peer.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.5
The value of this object is the sum total of the values of
the corresponding instances of the following objects:

cirbhGsmErrorsMissedLatePackets
cirbhGsmErrorsMissedLostPackets
cirbhGsmErrorsMissedNoMemPa…
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.6
The number of packets missed on backhaul because they
arrived past the allowed time frame.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.7
The number of packets missed on backhaul because they
were lost on backhaul.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.8
The number of packets missed on backhaul for lack of
available memory to allocate packet.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.9
The number of packets missed on backhaul because the of a
reset event.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.10
The number of times information contained in
packet could not be decompressed.
failuresSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.11
The number of times the information contained in the
packet could not be compressed.
failuresSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.12
The number of times compression failed because
packet was unavailable.
failuresSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.13
The number of times compression failed because
route to peer was not available.
failuresSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.14
The number of times compression failed because
interface was down.
failuresSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.15
The number of times compression failed because of
encapsulation errors.
failuresSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.16
The number of times compression failed because
of quality of service errors or traffic load.
dropsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.17
Fast send failures.
occurencesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.18
Unable to transmit GSM packet.
occurencesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.19
Unable to allocate buffer for transmission.
occurencesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.20
Transmission interface resets.
occurencesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.21
Packet was missed because backhaul jitter buffer was
ran out of available space.
occurencesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.22
Packet was lost because of interrupt failure.
FailuresSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.23
Count of GSM packets that arrived later than the allowed
time.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.24
Count of GSM packets that arrived earlier than the
allowed time.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.5.1.25
.1.3.6.1.4.1.9.9.483.1.2.1.3.6 · 1 row entry · 14 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cirbhUmtsErrorsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IP-RAN-BACKHAUL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IP-RAN-BACKHAUL-MIB::cirbhUmtsErrorsTable'
This table provides information on the errors that
can be encountered during the compression and
decompression of UMTS-Iub traffic.
cirbhUmtsErrorsTableEntry row .1.3.6.1.4.1.9.9.483.1.2.1.3.6.1
Each entry represents single shorthaul interface.
Indexes
Column Syntax OID
The count of packets dropped on backhaul because peer was
not ready.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.6.1.1
The number of backhaul packets that were received and dropped
because they contained invalid information.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.6.1.2
The number of times information contained in
packet could not be decompressed.
failuresSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.6.1.3
The number of times the information contained int the
packet could not be compressed.
failuresSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.6.1.4
The number of times compression failed because
packet was unavailable.
failuresSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.6.1.5
The number of times compression failed because
route to peer was not available.
failuresSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.6.1.6
The number of times compression failed because
interface was down.
failuresSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.6.1.7
The number of times compression failed because of
encapsulation errors.
failuresSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.6.1.8
The number of times compression failed because
of quality of service errors or traffic load.
dropsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.6.1.9
Unable to allocate packet used to send data on shorthaul
interface.
occurrencesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.6.1.10
The UMTS encapsulate failures.
occurencesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.6.1.11
Packet dropped because local PVC was unavailable.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.6.1.12
Packet dropped because remote PVC was unavailable.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.6.1.13
Packets dropped on backhaul.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.6.1.14
.1.3.6.1.4.1.9.9.483.1.2.1.3.7 · 1 row entry · 4 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cirbhShortHaulBulkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IP-RAN-BACKHAUL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IP-RAN-BACKHAUL-MIB::cirbhShortHaulBulkTable'
This table provides historical information on the amount of
backhaul traffic contributed by each interface.
cirbhShortHaulBulkTableEntry row .1.3.6.1.4.1.9.9.483.1.2.1.3.7.1
Each entry represents the average traffic for last second.
Each entry provides information on traffic rates for raw
and compressed data.
Column Syntax OID
An index used to access history of
cirbhShortHaulBulkDataTable objects.
CirbhHistoryIndex
Type Constraints:
range: 1..4294967295
.1.3.6.1.4.1.9.9.483.1.2.1.3.7.1.1
Time when sample was collected.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.9.9.483.1.2.1.3.7.1.2
The Base Unit is an integer used to provide a range of bytes
rates provided in the cirbhShortHaulBulkUtil object. All
values in the cirbhShortHaulBulkUtil object share the same
base unit.
BytesUnsigned32
Constraints:
range: 256-2147483647
.1.3.6.1.4.1.9.9.483.1.2.1.3.7.1.3
This object provides the amount of traffic transmitted
in a particular shorthaul. The object contains 1 to
128 pairs. The length of the octet string can be used
to calculate number of pairs. The information is in
the…
Bytes/SecondOctetString
Constraints:
range: 0-256
.1.3.6.1.4.1.9.9.483.1.2.1.3.7.1.4

cirbhBackHaulTable

table obsolete
.1.3.6.1.4.1.9.9.483.1.2.2.1.1 · 1 row entry · 6 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cirbhBackHaulTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IP-RAN-BACKHAUL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IP-RAN-BACKHAUL-MIB::cirbhBackHaulTable'
This table provides information on backHaul links.
cirbhBackHaulEntry row .1.3.6.1.4.1.9.9.483.1.2.2.1.1.1
Each entry represents a backhaul link between BSC and
a particular BTS site.
Indexes
Column Syntax OID
This object provides the serial number of the adjacent
device supporting the backhaul connection. This object
contains the same value as the corresponding
entPhysicalSerialNum object. The type of object like chassis
or …
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.483.1.2.2.1.1.1.1
This object provides the vendor type of the adjacent
device supporting backhaul connection. This object
contains the same value as the corresponding
entPhysicalVendorType object.
SNMPv2-TCAutonomousType
Description:
Represents an independently extensible type identification
value. It may, for example, indicate a particular sub-tree
with further MIB definitions, or define a particular type of
protocol or hardware.
.1.3.6.1.4.1.9.9.483.1.2.2.1.1.1.2
The utilization state for traffic received on
backhaul multilink.

The following objects will be used to calculate
link utilization state:

cirbhBackHaulAcceptableThreshold
cirbhBackHaulWarni…
CirbhBackHaulUtilizationState
Type Values:
1acceptable
2warning
3overloaded
.1.3.6.1.4.1.9.9.483.1.2.2.1.1.1.3
The utilization state for traffic transmitted on
backhaul multilink.

The following objects will be used to calculate
link utilization state:

cirbhBackHaulAcceptableThreshold
cirbhBackHaulWa…
CirbhBackHaulUtilizationState
Type Values:
1acceptable
2warning
3overloaded
.1.3.6.1.4.1.9.9.483.1.2.2.1.1.1.4
The average receive utilization of the link over the last
second.
percentCirbhBackHaulUtilization
Type Constraints:
range: 0..100
.1.3.6.1.4.1.9.9.483.1.2.2.1.1.1.5
The average transmit utilization of the link over the last
second.
percentCirbhBackHaulUtilization
Type Constraints:
range: 0..100
.1.3.6.1.4.1.9.9.483.1.2.2.1.1.1.6
.1.3.6.1.4.1.9.9.483.1.2.2.1.2 · 1 row entry · 3 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cirbhBackHaulShortHaulTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IP-RAN-BACKHAUL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IP-RAN-BACKHAUL-MIB::cirbhBackHaulShortHaulTable'
This table lists the associations between shorthaul and
backhaul interfaces.
cirbhBackHaulShortHaulEntry row .1.3.6.1.4.1.9.9.483.1.2.2.1.2.1
An entry indicates a single association between a backhaul and
shorthaul interface.
Column Syntax OID
This object indicates the backhaul interface.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.9.9.483.1.2.2.1.2.1.1
This object indicates the shorthaul interface.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.9.9.483.1.2.2.1.2.1.2
This object indicates the value of sysUpTime when the
entry was created.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.9.9.483.1.2.2.1.2.1.3

cirbhBackHaulHistoryTable

table obsolete
.1.3.6.1.4.1.9.9.483.1.2.2.2.1 · 1 row entry · 8 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cirbhBackHaulHistoryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IP-RAN-BACKHAUL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IP-RAN-BACKHAUL-MIB::cirbhBackHaulHistoryTable'
This table provides historical information on traffic
distribution on backhaul interface.
cirbhBackHaulHistoryEntry row .1.3.6.1.4.1.9.9.483.1.2.2.2.1.1
Each entry provides information on the utilization of
backhaul interface. The utilization is broken down
by protocol and by direction. An entry is updated in
this table every second.
Column Syntax OID
An index used to access history of
cirbhBackHaulHistoryTable objects.
CirbhHistoryIndex
Type Constraints:
range: 1..4294967295
.1.3.6.1.4.1.9.9.483.1.2.2.2.1.1.1
The average receive utilization of link over the last
second.
percentCirbhBackHaulUtilization
Type Constraints:
range: 0..100
.1.3.6.1.4.1.9.9.483.1.2.2.2.1.1.2
The average transmit utilization of link over the last
second.
percentCirbhBackHaulUtilization
Type Constraints:
range: 0..100
.1.3.6.1.4.1.9.9.483.1.2.2.2.1.1.3
The average receive utilization of link over the last
second that consisted of GSM-Abis traffic.
percentCirbhBackHaulUtilization
Type Constraints:
range: 0..100
.1.3.6.1.4.1.9.9.483.1.2.2.2.1.1.4
The average transmit utilization of link over the last
second that consisted of GSM-Abis traffic.
percentCirbhBackHaulUtilization
Type Constraints:
range: 0..100
.1.3.6.1.4.1.9.9.483.1.2.2.2.1.1.5
The average receive utilization of link over the last
second that consisted of UMTS traffic.
percentCirbhBackHaulUtilization
Type Constraints:
range: 0..100
.1.3.6.1.4.1.9.9.483.1.2.2.2.1.1.6
The average transmit utilization of link over the last
second that consisted of UMTS traffic.
percentCirbhBackHaulUtilization
Type Constraints:
range: 0..100
.1.3.6.1.4.1.9.9.483.1.2.2.2.1.1.7
Time when sample was collected.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.9.9.483.1.2.2.2.1.1.8

cirbhBackHaulStatsTable

table obsolete
.1.3.6.1.4.1.9.9.483.1.2.2.2.2 · 1 row entry · 15 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cirbhBackHaulStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IP-RAN-BACKHAUL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IP-RAN-BACKHAUL-MIB::cirbhBackHaulStatsTable'
This table provides current information on the utilization of
backhaul interface. One second load samples are collected
and the corresponding entry is incremented. The provides
a distribution of the traffic load. At the end of an
interval the information is collected and used to
populate entry in the cirbhBackHaulStatsHistoryTable.
The interval is specified by the cirbhBackHaulStatsInterval
object. The counters in this table increase until the
interval ends at which time they are reset.
cirbhBackHaulStatsEntry row .1.3.6.1.4.1.9.9.483.1.2.2.2.2.1
Each entry contains the distribution of traffic in the
current window specified by the cirbhBackHaulStatsInterval
object.
Column Syntax OID
The direction of traffic on backhaul.
CirbhTrafficDirection
Type Values:
1receive
2transmit
.1.3.6.1.4.1.9.9.483.1.2.2.2.2.1.1
The type of traffic.
CirbhTrafficType
Type Values:
1all
2gsm
3umts
.1.3.6.1.4.1.9.9.483.1.2.2.2.2.1.2
The total numbers of seconds during which the backhaul link
was utilized from 0 to 9 percent.
secondsPerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.9.9.483.1.2.2.2.2.1.3
The total numbers of seconds during which the backhaul link
was utilized from 10 to 19 percent.
secondsPerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.9.9.483.1.2.2.2.2.1.4
The total numbers of seconds during which the backhaul link
was utilized from 20 to 29 percent.
secondsPerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.9.9.483.1.2.2.2.2.1.5
The total numbers of seconds during which the backhaul link
was utilized from 30 to 39 percent.
secondsPerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.9.9.483.1.2.2.2.2.1.6
The total numbers of seconds during which the backhaul link
was utilized from 40 to 49 percent.
secondsPerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.9.9.483.1.2.2.2.2.1.7
The total numbers of seconds during which the backhaul link
was utilized from 50 to 59 percent.
secondsPerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.9.9.483.1.2.2.2.2.1.8
The total numbers of seconds during which the backhaul link
was utilized from 60 to 69 percent.
secondsPerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.9.9.483.1.2.2.2.2.1.9
The total numbers of seconds during which the backhaul link
was utilized from 70 to 79 percent.
secondsPerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.9.9.483.1.2.2.2.2.1.10
The total numbers of seconds during which the backhaul link
was utilized from 80 to 89 percent.
secondsPerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.9.9.483.1.2.2.2.2.1.11
The total numbers of seconds during which the backhaul link
was utilized from 90 to 100 percent.
secondsPerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.9.9.483.1.2.2.2.2.1.12
Time when sample was collected.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.9.9.483.1.2.2.2.2.1.13
The maximum utilization encountered within interval.
CirbhBackHaulUtilization
Type Constraints:
range: 0..100
.1.3.6.1.4.1.9.9.483.1.2.2.2.2.1.14
Time when cirbhStatsMaxUtilization was recorded.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.9.9.483.1.2.2.2.2.1.15
.1.3.6.1.4.1.9.9.483.1.2.12 · 1 row entry · 17 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cirbhBackHaulStatsHistoryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IP-RAN-BACKHAUL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IP-RAN-BACKHAUL-MIB::cirbhBackHaulStatsHistoryTable'
This table provides historical information of distribution
of load on backhaul interfaces.
cirbhBackHaulStatsHistoryEntry row .1.3.6.1.4.1.9.9.483.1.2.12.1
Each entry in this table is the data collected from the
cirbhBackHaulStatsTable table.
Column Syntax OID
An index used to access each 15 minute entry.
CirbhHistoryIndex
Type Constraints:
range: 1..4294967295
.1.3.6.1.4.1.9.9.483.1.2.12.1.1
The direction of traffic on backhaul.
CirbhTrafficDirection
Type Values:
1receive
2transmit
.1.3.6.1.4.1.9.9.483.1.2.12.1.2
The type of traffic in backhaul history table.
CirbhTrafficType
Type Values:
1all
2gsm
3umts
.1.3.6.1.4.1.9.9.483.1.2.12.1.3
The total numbers of seconds during which the backhaul link
was utilized from 0 to 9 percent.
secondsPerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.9.9.483.1.2.12.1.4
The total numbers of seconds during which the backhaul link
was utilized from 10 to 19 percent.
secondsPerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.9.9.483.1.2.12.1.5
The total numbers of seconds during which the backhaul link
was utilized from 20 to 29 percent.
secondsPerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.9.9.483.1.2.12.1.6
The total numbers of seconds during which the backhaul link
was utilized from 30 to 39 percent.
secondsPerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.9.9.483.1.2.12.1.7
The total numbers of seconds during which the backhaul link
was utilized from 40 to 49 percent.
secondsPerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.9.9.483.1.2.12.1.8
The total numbers of seconds during which the backhaul link
was utilized from 50 to 59 percent.
secondsPerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.9.9.483.1.2.12.1.9
The total numbers of seconds during which the backhaul link
was utilized from 60 to 69 percent.
secondsPerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.9.9.483.1.2.12.1.10
The total numbers of seconds during which the backhaul link
was utilized from 70 to 79 percent.
secondsPerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.9.9.483.1.2.12.1.11
The total numbers of seconds during which the backhaul link
was utilized from 80 to 89 percent.
secondsPerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.9.9.483.1.2.12.1.12
The total numbers of seconds during which the backhaul link
was utilized from 90 to 100 percent.
secondsPerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.9.9.483.1.2.12.1.13
End time when sample was collected.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.9.9.483.1.2.12.1.14
The maximum utilization encountered within interval.
CirbhBackHaulUtilization
Type Constraints:
range: 0..100
.1.3.6.1.4.1.9.9.483.1.2.12.1.15
Time when cirbhStatsHistoryMaxUtilization was recorded.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.9.9.483.1.2.12.1.16
The average utilization over the specified time period.
CirbhBackHaulUtilization
Type Constraints:
range: 0..100
.1.3.6.1.4.1.9.9.483.1.2.12.1.17