Standard view Table view

CISCO-INTERFACE-XCVR-MONITOR-MIB

        A MIB module that provides monitoring information
about the transceivers plugged into interface on a
system.

Source file: CISCO-INTERFACE-XCVR-MONITOR-MIB
Last revised: 9 Oct 2009, 00:00 UTC
Identity: ciscoInterfaceXcvrMonitorMIB
Base OID: 1.3.6.1.4.1.9.9.706

Imported Objects

CISCO-SMI	ciscoMgmt
IF-MIB	ifName
SNMPv2-CONF	MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI	MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC	TEXTUAL-CONVENTION (no object page)

Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity

/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-INTERFACE-XCVR-MONITOR-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-INTERFACE-XCVR-MONITOR-MIB::ciscoInterfaceXcvrMonitorMIB'

Walk the MIB subtree

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-INTERFACE-XCVR-MONITOR-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-INTERFACE-XCVR-MONITOR-MIB::ciscoInterfaceXcvrMonitorMIB'

How SNMP, Net-SNMP, MIB paths, and variants work

Objects (18)

ciscoInterfaceXcvrMonitorMIB		`.1.3.6.1.4.1.9.9.706`
ciscoInterfaceXcvrMonMIBNotifs		`.1.3.6.1.4.1.9.9.706.0`
ciscoInterfaceXcvrMonMIBObjects		`.1.3.6.1.4.1.9.9.706.1`
cIfXcvrMonDigitalDiagTempAlarm	CiscoInterfaceXcvrMonitorStatus	`.1.3.6.1.4.1.9.9.706.1.1`
cIfXcvrMonDigitalDiagTxPwrWarning	CiscoInterfaceXcvrMonitorStatus	`.1.3.6.1.4.1.9.9.706.1.10`
cIfXcvrMonDigitalDiagTxFaultAlarm	CiscoInterfaceXcvrMonitorStatus	`.1.3.6.1.4.1.9.9.706.1.11`
cIfXcvrMonStatusChangeNotifEnable r/w	Enumeration	`.1.3.6.1.4.1.9.9.706.1.12`
cIfXcvrMonDigitalDiagTempWarning	CiscoInterfaceXcvrMonitorStatus	`.1.3.6.1.4.1.9.9.706.1.2`
cIfXcvrMonDigitalDiagVoltAlarm	CiscoInterfaceXcvrMonitorStatus	`.1.3.6.1.4.1.9.9.706.1.3`
cIfXcvrMonDigitalDiagVoltWarning	CiscoInterfaceXcvrMonitorStatus	`.1.3.6.1.4.1.9.9.706.1.4`
cIfXcvrMonDigitalDiagCurrAlarm	CiscoInterfaceXcvrMonitorStatus	`.1.3.6.1.4.1.9.9.706.1.5`
cIfXcvrMonDigitalDiagCurrWarning	CiscoInterfaceXcvrMonitorStatus	`.1.3.6.1.4.1.9.9.706.1.6`
cIfXcvrMonDigitalDiagRxPwrAlarm	CiscoInterfaceXcvrMonitorStatus	`.1.3.6.1.4.1.9.9.706.1.7`
cIfXcvrMonDigitalDiagRxPwrWarning	CiscoInterfaceXcvrMonitorStatus	`.1.3.6.1.4.1.9.9.706.1.8`
cIfXcvrMonDigitalDiagTxPwrAlarm	CiscoInterfaceXcvrMonitorStatus	`.1.3.6.1.4.1.9.9.706.1.9`
ciscoInterfaceXcvrMonMIBConform		`.1.3.6.1.4.1.9.9.706.2`
ciscoInterfaceXcvrMonMIBCompliances		`.1.3.6.1.4.1.9.9.706.2.1`
ciscoInterfaceXcvrMonMIBGroups		`.1.3.6.1.4.1.9.9.706.2.2`

Dependencies (7) 5 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree

CISCO-INTERFACE-XCVR-MONITOR-MIBciscoselected
- CISCO-SMIcisco1 symbol
  - SNMPv2-SMIrfcdefault fallback3 symbols
- IF-MIBrfcdefault fallback1 symbol
  - IANAifType-MIBrfc1 symbol
    - SNMPv2-SMIrfcshared2 symbols
    - SNMPv2-TCrfc1 symbol
      - SNMPv2-SMIrfcshared1 symbol
  - SNMPv2-CONFrfc3 symbols
    - SNMPv2-SMIrfcshared3 symbols
  - SNMPv2-MIBrfc1 symbol
    - SNMPv2-CONFrfcshared3 symbols
    - SNMPv2-SMIrfcshared7 symbols
    - SNMPv2-TCrfcshared3 symbols
  - SNMPv2-SMIrfcshared9 symbols
  - SNMPv2-TCrfcshared8 symbols
- SNMPv2-CONFrfcdefault fallbackshared3 symbols
- SNMPv2-SMIrfcdefault fallbackshared3 symbols
- SNMPv2-TCrfcdefault fallbackshared1 symbol

Dependency-first compile order

SNMPv2-SMIrfc
CISCO-SMIcisco
SNMPv2-TCrfc
IANAifType-MIBrfc
SNMPv2-CONFrfc
SNMPv2-MIBrfc
IF-MIBrfc
CISCO-INTERFACE-XCVR-MONITOR-MIBciscoselected

Type Definitions (1)

CiscoInterfaceXcvrMonitorStatus	Enumeration	`highSet(1)` `lowSet(2)` `highClear(3)` `lowClear(4)` `normal(5)`

Conformance Groups (2)

cIfXcvrDigitalDiagMonStatusGroup	cIfXcvrMonDigitalDiagTempAlarm cIfXcvrMonDigitalDiagTempWarning cIfXcvrMonDigitalDiagVoltAlarm cIfXcvrMonDigitalDiagVoltWarning cIfXcvrMonDigitalDiagCurrAlarm cIfXcvrMonDigitalDiagCurrWarning cIfXcvrMonDigitalDiagRxPwrAlarm cIfXcvrMonDigitalDiagRxPwrWarning cIfXcvrMonDigitalDiagTxPwrAlarm cIfXcvrMonDigitalDiagTxPwrWarning cIfXcvrMonDigitalDiagTxFaultAlarm cIfXcvrMonStatusChangeNotifEnable A collection of Cisco specific Digital Diagnostics monitoring status information.	`.1.3.6.1.4.1.9.9.706.2.2.1`
cIfXcvrMonStatusChangeNotifGroup	cIfXcvrMonStatusChangeNotif A collection of Cisco specific Digital Diagnostics monitoring notifications.	`.1.3.6.1.4.1.9.9.706.2.2.2`

Compliance Statements (1)

OID .1.3.6.1.4.1.9.9.706.2.1.1

This is a default module-compliance
containing default object groups.

Required groups

mandatory	cIfXcvrDigitalDiagMonStatusGroup
mandatory	cIfXcvrMonStatusChangeNotifGroup

Object refinements

Object	Access	Syntax	Description
cIfXcvrMonStatusChangeNotifEnable	readonly		Write access is not required.

Notifications / Traps (1)

Name	OID	Description
cIfXcvrMonStatusChangeNotif IF-MIBifName cIfXcvrMonDigitalDiagTempAlarm cIfXcvrMonDigitalDiagTempWarning cIfXcvrMonDigitalDiagVoltAlarm cIfXcvrMonDigitalDiagVoltWarning cIfXcvrMonDigitalDiagCurrAlarm cIfXcvrMonDigitalDiagCurrWarning cIfXcvrMonDigitalDiagRxPwrAlarm cIfXcvrMonDigitalDiagRxPwrWarning cIfXcvrMonDigitalDiagTxPwrAlarm cIfXcvrMonDigitalDiagTxPwrWarning cIfXcvrMonDigitalDiagTxFaultAlarm	`.1.3.6.1.4.1.9.9.706.0.1`	This notification trap indicates the current status of the alarm and warning monitoring parameters for all the sensors based on the digital diagnostic monitoring information. This notification is generated whenever there is a change in the status of atleast one of the monitoring parameters of the sensors on the transceiver in an interface.