CISCO-IKE-FLOW-EXT-MIB

        This MIB module is an extension to 
CISCO-IKE-FLOW-MIB and contains Cisco Specific 
extensions for monitoring IKE.
        
It is for monitoring the structures and status of
IPsec control flows based on Internet Key Exchange
protocol.
         
Acronyms
The following acronyms are used in this document:     
        
Flow, Tunnel:
     An ISAKMP SA can be regarded as representing
     a flow of ISAKMP/IKE traffic. Hence an ISAKMP
     is referred to as a 'Phase 1 Tunnel' in this
     document. 
           
IPsec:  
     Secure IP Protocol. 
        
ISAKMP:
     Internet Security Association and Key
     Management Protocol.
        
IKE:
     Internet Key Exchange Protocol. 
             
FCSP: 
     Fibre Channel Security Protocol.
             
SA:  
     Security Association
     (ref: rfc2408).
        
Phase 2 Tunnel:
     AN instance of a non-ISAKMP SA  bundle in which
     all the SA share the same proxy identifiers
     protect the same stream of application traffic.
     Such an SA bundle is termed a 'Phase 2 Tunnel'.
     Note that a Phase 2 tunnel may comprise different
     SA bundles and different number of SA bundles at
     different times (due to key refresh). 
    
Source file
CISCO-IKE-FLOW-EXT-MIB
Last revised
Identity
ciscoIkeFlowExtMIB
Base OID
1.3.6.1.4.1.9.9.428
Imported Objects
CISCO-IPSEC-SIGNALING-MIB cisgIpsSgProtocol cisgIpsSgTunIndex
CISCO-IPSEC-TC CIKEIsakmpDoi CIPsecPhase1PeerIdentityType
CISCO-SMI ciscoMgmt
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page)
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-IKE-FLOW-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-IKE-FLOW-EXT-MIB::ciscoIkeFlowExtMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IKE-FLOW-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IKE-FLOW-EXT-MIB::ciscoIkeFlowExtMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (15)
.1.3.6.1.4.1.9.9.428
.1.3.6.1.4.1.9.9.428.0
.1.3.6.1.4.1.9.9.428.1
.1.3.6.1.4.1.9.9.428.1.1
Enumeration
.1.3.6.1.4.1.9.9.428.1.1.1
.1.3.6.1.4.1.9.9.428.1.2
.1.3.6.1.4.1.9.9.428.1.2.1
.1.3.6.1.4.1.9.9.428.1.2.1.1
.1.3.6.1.4.1.9.9.428.1.2.1.2
OctetString
.1.3.6.1.4.1.9.9.428.1.2.1.3
.1.3.6.1.4.1.9.9.428.1.2.1.4
OctetString
.1.3.6.1.4.1.9.9.428.1.2.1.5
.1.3.6.1.4.1.9.9.428.2
.1.3.6.1.4.1.9.9.428.2.1
.1.3.6.1.4.1.9.9.428.2.2
Dependencies (7) 6 direct · 1 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Conformance Groups (2)
A collection of objects providing Global
IKE configuration.
.1.3.6.1.4.1.9.9.428.2.2.1
The collection of objects providing IKE tunnels
info.
.1.3.6.1.4.1.9.9.428.2.2.2
Compliance Statements (1)

OID .1.3.6.1.4.1.9.9.428.2.1.1
The compliance statement for entities which
implement the Cisco IKE extension MIB.
Required groups