CISCO-IETF-VRRP-MIB

        This MIB describes objects used for managing Virtual
Router Redundancy Protocol (VRRP) over IPv4 and IPv6
protocols.
        
This MIB supports VRRP for IPv4 and IPv6 protocols
simultaneously running on a given interface of a
router.
    
Source file
CISCO-IETF-VRRP-MIB
Last revised
Identity
ciscoVrrpMIB
Base OID
1.3.6.1.4.1.9.10.999
Imported Objects
CISCO-SMI ciscoExperiment
IF-MIB ifIndex
INET-ADDRESS-MIB InetAddress InetAddressType
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC MacAddress RowStatus TEXTUAL-CONVENTION (no object page) TimeInterval TimeStamp TruthValue
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-IETF-VRRP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-IETF-VRRP-MIB::ciscoVrrpMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IETF-VRRP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IETF-VRRP-MIB::ciscoVrrpMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (48)
.1.3.6.1.4.1.9.10.999
.1.3.6.1.4.1.9.10.999.0
.1.3.6.1.4.1.9.10.999.1
Enumeration
.1.3.6.1.4.1.9.10.999.1.10
Enumeration
.1.3.6.1.4.1.9.10.999.1.2
.1.3.6.1.4.1.9.10.999.1.7
.1.3.6.1.4.1.9.10.999.1.7.1
.1.3.6.1.4.1.9.10.999.1.7.1.1
.1.3.6.1.4.1.9.10.999.1.7.1.10
centisecondsInteger32
.1.3.6.1.4.1.9.10.999.1.7.1.11
.1.3.6.1.4.1.9.10.999.1.7.1.12
.1.3.6.1.4.1.9.10.999.1.7.1.13
.1.3.6.1.4.1.9.10.999.1.7.1.14
.1.3.6.1.4.1.9.10.999.1.7.1.15
.1.3.6.1.4.1.9.10.999.1.7.1.2
.1.3.6.1.4.1.9.10.999.1.7.1.3
Enumeration
.1.3.6.1.4.1.9.10.999.1.7.1.4
Integer32
.1.3.6.1.4.1.9.10.999.1.7.1.5
Enumeration
.1.3.6.1.4.1.9.10.999.1.7.1.6
Integer32
.1.3.6.1.4.1.9.10.999.1.7.1.7
.1.3.6.1.4.1.9.10.999.1.7.1.9
.1.3.6.1.4.1.9.10.999.1.8
.1.3.6.1.4.1.9.10.999.1.8.1
.1.3.6.1.4.1.9.10.999.1.8.1.2
OctetString
.1.3.6.1.4.1.9.10.999.1.8.1.3
.1.3.6.1.4.1.9.10.999.1.8.1.4
Enumeration
.1.3.6.1.4.1.9.10.999.1.9
.1.3.6.1.4.1.9.10.999.2
.1.3.6.1.4.1.9.10.999.2.1
.1.3.6.1.4.1.9.10.999.2.2
.1.3.6.1.4.1.9.10.999.2.3
.1.3.6.1.4.1.9.10.999.2.5
.1.3.6.1.4.1.9.10.999.2.5.1
.1.3.6.1.4.1.9.10.999.2.5.1.1
.1.3.6.1.4.1.9.10.999.2.5.1.11
.1.3.6.1.4.1.9.10.999.2.5.1.12
.1.3.6.1.4.1.9.10.999.2.5.1.13
.1.3.6.1.4.1.9.10.999.2.5.1.14
.1.3.6.1.4.1.9.10.999.2.5.1.2
.1.3.6.1.4.1.9.10.999.2.5.1.3
.1.3.6.1.4.1.9.10.999.2.5.1.4
.1.3.6.1.4.1.9.10.999.2.5.1.5
.1.3.6.1.4.1.9.10.999.2.5.1.6
.1.3.6.1.4.1.9.10.999.2.5.1.7
.1.3.6.1.4.1.9.10.999.2.5.1.8
.1.3.6.1.4.1.9.10.999.3
.1.3.6.1.4.1.9.10.999.3.1
.1.3.6.1.4.1.9.10.999.3.2
Dependencies (8) 6 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCO-SMIcisco
  3. SNMPv2-TCrfc
  4. IANAifType-MIBrfc
  5. SNMPv2-CONFrfc
  6. SNMPv2-MIBrfc
  7. IF-MIBrfc
  8. INET-ADDRESS-MIBrfc
  9. CISCO-IETF-VRRP-MIBciscoselected
Type Definitions (1)
Integer32 range: 1..255
Compliance Statements (2)

OID .1.3.6.1.4.1.9.10.999.3.1.2
The compliance statement for both VRRP for IPv4 and
VRRP for IPv6 implementations.
Required groups
Object refinements
ObjectAccessSyntaxDescription
cVrrpOperationsPriority
SETable values are from 1 to 255.

OID .1.3.6.1.4.1.9.10.999.3.1.3
The read-only compliance statement for all VRRP
implementations VRRP for IPv4 and IPv6.
Required groups
Object refinements
ObjectAccessSyntaxDescription
cVrrpNotificationCntl readonly
Write access is not required.
cVrrpOperationsPriority readonly
Write access is not required.
cVrrpOperationsPrimaryIpAddr readonly
Write access is not required.
cVrrpOperationsAdvInterval readonly
Write access is not required.
cVrrpOperationsRowStatus readonly
Write access is not required.
cVrrpAssociatedIpAddrRowStatus readonly
Write access is not required.
Notifications / Traps (2)
NameOIDDescription
.1.3.6.1.4.1.9.10.999.0.1
The newMaster notification indicates that the sending agent
has transitioned to 'Master' state.
.1.3.6.1.4.1.9.10.999.0.3
The error notification indicates that the sending agent has
encountered the protocol error indicated by the value of
cVrrpNotificationProtoErrorReason.