CISCO-IETF-SCTP-MIB

        The MIB module for managing SCTP protocol (RFC 2960).
    
Source file
CISCO-IETF-SCTP-MIB
Last revised
Identity
cSctpMIB
Base OID
1.3.6.1.4.1.9.10.75
Imported Objects
CISCO-SMI ciscoExperiment
INET-ADDRESS-MIB InetAddress InetAddressType
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter64 Gauge32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC TEXTUAL-CONVENTION (no object page) TimeStamp
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-IETF-SCTP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-IETF-SCTP-MIB::cSctpMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IETF-SCTP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IETF-SCTP-MIB::cSctpMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (78)
.1.3.6.1.4.1.9.10.75
.1.3.6.1.4.1.9.10.75.1
.1.3.6.1.4.1.9.10.75.1.1
Enumeration
.1.3.6.1.4.1.9.10.75.1.1.1
.1.3.6.1.4.1.9.10.75.1.1.10
.1.3.6.1.4.1.9.10.75.1.1.11
.1.3.6.1.4.1.9.10.75.1.1.12
.1.3.6.1.4.1.9.10.75.1.1.13
.1.3.6.1.4.1.9.10.75.1.1.14
.1.3.6.1.4.1.9.10.75.1.1.15
.1.3.6.1.4.1.9.10.75.1.1.16
.1.3.6.1.4.1.9.10.75.1.1.17
.1.3.6.1.4.1.9.10.75.1.1.18
.1.3.6.1.4.1.9.10.75.1.1.19
.1.3.6.1.4.1.9.10.75.1.1.2
.1.3.6.1.4.1.9.10.75.1.1.20
.1.3.6.1.4.1.9.10.75.1.1.21
.1.3.6.1.4.1.9.10.75.1.1.22
.1.3.6.1.4.1.9.10.75.1.1.23
.1.3.6.1.4.1.9.10.75.1.1.24
.1.3.6.1.4.1.9.10.75.1.1.3
.1.3.6.1.4.1.9.10.75.1.1.4
.1.3.6.1.4.1.9.10.75.1.1.5
.1.3.6.1.4.1.9.10.75.1.1.6
.1.3.6.1.4.1.9.10.75.1.1.7
.1.3.6.1.4.1.9.10.75.1.1.8
.1.3.6.1.4.1.9.10.75.1.1.9
.1.3.6.1.4.1.9.10.75.1.2
.1.3.6.1.4.1.9.10.75.1.2.2
.1.3.6.1.4.1.9.10.75.1.2.2.1
.1.3.6.1.4.1.9.10.75.1.2.2.1.1
.1.3.6.1.4.1.9.10.75.1.2.2.1.10
.1.3.6.1.4.1.9.10.75.1.2.2.1.11
.1.3.6.1.4.1.9.10.75.1.2.2.1.12
.1.3.6.1.4.1.9.10.75.1.2.2.1.13
.1.3.6.1.4.1.9.10.75.1.2.2.1.14
.1.3.6.1.4.1.9.10.75.1.2.2.1.15
.1.3.6.1.4.1.9.10.75.1.2.2.1.17
OctetString
.1.3.6.1.4.1.9.10.75.1.2.2.1.2
.1.3.6.1.4.1.9.10.75.1.2.2.1.3
.1.3.6.1.4.1.9.10.75.1.2.2.1.4
.1.3.6.1.4.1.9.10.75.1.2.2.1.5
.1.3.6.1.4.1.9.10.75.1.2.2.1.6
.1.3.6.1.4.1.9.10.75.1.2.2.1.8
Enumeration
.1.3.6.1.4.1.9.10.75.1.2.2.1.9
.1.3.6.1.4.1.9.10.75.1.2.3
.1.3.6.1.4.1.9.10.75.1.2.3.1
.1.3.6.1.4.1.9.10.75.1.2.3.1.1
.1.3.6.1.4.1.9.10.75.1.2.3.1.2
.1.3.6.1.4.1.9.10.75.1.2.3.1.3
.1.3.6.1.4.1.9.10.75.1.2.4
.1.3.6.1.4.1.9.10.75.1.2.4.1
.1.3.6.1.4.1.9.10.75.1.2.4.1.1
.1.3.6.1.4.1.9.10.75.1.2.4.1.2
Enumeration
.1.3.6.1.4.1.9.10.75.1.2.4.1.3
Enumeration
.1.3.6.1.4.1.9.10.75.1.2.4.1.4
.1.3.6.1.4.1.9.10.75.1.2.4.1.5
.1.3.6.1.4.1.9.10.75.1.2.4.1.6
.1.3.6.1.4.1.9.10.75.1.2.4.1.7
.1.3.6.1.4.1.9.10.75.1.2.4.1.8
.1.3.6.1.4.1.9.10.75.1.2.5
.1.3.6.1.4.1.9.10.75.1.2.5.1
.1.3.6.1.4.1.9.10.75.1.2.5.1.1
.1.3.6.1.4.1.9.10.75.1.2.6
.1.3.6.1.4.1.9.10.75.1.2.6.1
.1.3.6.1.4.1.9.10.75.1.2.6.1.1
.1.3.6.1.4.1.9.10.75.1.2.7
.1.3.6.1.4.1.9.10.75.1.2.7.1
.1.3.6.1.4.1.9.10.75.1.2.7.1.1
.1.3.6.1.4.1.9.10.75.1.2.8
.1.3.6.1.4.1.9.10.75.1.2.8.1
.1.3.6.1.4.1.9.10.75.1.2.8.1.1
.1.3.6.1.4.1.9.10.75.1.2.9
.1.3.6.1.4.1.9.10.75.1.2.9.1
.1.3.6.1.4.1.9.10.75.1.2.9.1.1
.1.3.6.1.4.1.9.10.75.2
.1.3.6.1.4.1.9.10.75.2.1
.1.3.6.1.4.1.9.10.75.2.2
Dependencies (5) 5 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCO-SMIcisco
  3. SNMPv2-TCrfc
  4. INET-ADDRESS-MIBrfc
  5. SNMPv2-CONFrfc
  6. CISCO-IETF-SCTP-MIBciscoselected
Type Definitions (1)
Unsigned32
Conformance Groups (6)
Common parameters for all the associations. They can usually
be referred as configuration parameters
.1.3.6.1.4.1.9.10.75.2.1.1
The cSctp group of objects to control state changes in the
SCTP protocol local layer. They include the data for all the
associations.
.1.3.6.1.4.1.9.10.75.2.1.2
The cSctp group of objects providing for management of SCTP
most common statistics for the local SCTP layer.
.1.3.6.1.4.1.9.10.75.2.1.3
The sctp group of objects to manage specific local and
remote SCTP variables (local and remote tables). These
variables include all the SCTP basic features.
.1.3.6.1.4.1.9.10.75.2.1.4
The cSctp group of objects to manage SCTP statistics related
to the remote endpoint.
.1.3.6.1.4.1.9.10.75.2.1.5
Objects used in the inverse lookup table.
.1.3.6.1.4.1.9.10.75.2.1.6
Compliance Statements (1)

OID .1.3.6.1.4.1.9.10.75.2.2.1
The compliance statement for SNMPv3 entities which implement
SCTP.
As a remark, the not-accessible objects:
cSctpAssocLocalAddressIPType and cSctpAssocRemAddressIPType do
not support the dns(4)type since the use of the host names is
limited to first stage, when the association is being
established.
cSctpAssocLocalAddressIP and cSctpAssocRemAddressIP will only
accept the size of 4 or 16 because it is only required to
support IPv4 and unique IPv6 addresses.
Required groups
mandatory cSctpGeneralVariablesGroup
mandatory cSctpAssocTablesVariablesGroup
optional cSctpStateStatGroup The sctp group of objects to control state changes in
the SCTP protocol.
optional cSctpOtherStatGroup The sctp group of objects providing for management of
SCTP general statistics.
optional cSctpAssocStatGroup The sctp group of objects to manage SCTP statistics
related to the remote endpoint.
optional cSctpInverseGroup Objects used in inverse lookup tables. This should be
implemented for easier lookups in the association
tables.