CISCO-IETF-PW-ATM-MIB

        This MIB contains managed object definitions for Pseudo Wire
emulation of ATM over Packet Switched Networks(PSN).
        
This MIB reports to the PW-MIB. The PW-MIB contains
structures and MIB associations generic to Pseudo-Wire
Virtual Circuit (VC) emulation. VC-specific MIBs (such as
this) contain config and stats for specific VC types.
    
Source file
CISCO-IETF-PW-ATM-MIB
Last revised
Identity
cpwVcAtmMIB
Base OID
1.3.6.1.4.1.9.10.9000
Imported Objects
ATM-TC-MIB AtmVcIdentifier AtmVpIdentifier
CISCO-IETF-PW-MIB cpwVcIndex
CISCO-SMI ciscoExperiment
IF-MIB InterfaceIndex
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Counter64 Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC RowStatus TruthValue
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-IETF-PW-ATM-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-IETF-PW-ATM-MIB::cpwVcAtmMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IETF-PW-ATM-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IETF-PW-ATM-MIB::cpwVcAtmMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (33)
.1.3.6.1.4.1.9.10.9000
.1.3.6.1.4.1.9.10.9000.0
.1.3.6.1.4.1.9.10.9000.1
.1.3.6.1.4.1.9.10.9000.1.1
.1.3.6.1.4.1.9.10.9000.1.1.1
cpwAtmIf r/w
.1.3.6.1.4.1.9.10.9000.1.1.1.1
.1.3.6.1.4.1.9.10.9000.1.1.1.10
Enumeration
.1.3.6.1.4.1.9.10.9000.1.1.1.11
.1.3.6.1.4.1.9.10.9000.1.1.1.12
cpwAtmVpi r/w
.1.3.6.1.4.1.9.10.9000.1.1.1.2
cpwAtmVci r/w
.1.3.6.1.4.1.9.10.9000.1.1.1.3
.1.3.6.1.4.1.9.10.9000.1.1.1.4
.1.3.6.1.4.1.9.10.9000.1.1.1.5
.1.3.6.1.4.1.9.10.9000.1.1.1.6
.1.3.6.1.4.1.9.10.9000.1.1.1.7
.1.3.6.1.4.1.9.10.9000.1.1.1.8
.1.3.6.1.4.1.9.10.9000.1.1.1.9
.1.3.6.1.4.1.9.10.9000.1.2
.1.3.6.1.4.1.9.10.9000.1.2.1
.1.3.6.1.4.1.9.10.9000.1.2.1.1
.1.3.6.1.4.1.9.10.9000.1.2.1.10
.1.3.6.1.4.1.9.10.9000.1.2.1.11
.1.3.6.1.4.1.9.10.9000.1.2.1.2
.1.3.6.1.4.1.9.10.9000.1.2.1.3
.1.3.6.1.4.1.9.10.9000.1.2.1.4
.1.3.6.1.4.1.9.10.9000.1.2.1.5
.1.3.6.1.4.1.9.10.9000.1.2.1.6
.1.3.6.1.4.1.9.10.9000.1.2.1.7
.1.3.6.1.4.1.9.10.9000.1.2.1.8
.1.3.6.1.4.1.9.10.9000.1.2.1.9
.1.3.6.1.4.1.9.10.9000.2
.1.3.6.1.4.1.9.10.9000.2.1
.1.3.6.1.4.1.9.10.9000.2.2
Dependencies (12) 7 direct · 5 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Compliance Statements (1)

OID .1.3.6.1.4.1.9.10.9000.2.2.1
The compliance statement for agent that support PW
ATM.
Required groups