CISCO-IETF-MEGACO-MIB Table View

This table contains a nextLinkId for each Gateway. 
It provides the manager with the nextLinkId for use 
in creating new Gateway Table Entries.

cmedLinkIdEntry row .1.3.6.1.4.1.9.10.99999.1.1.1.1

This table contains the NextLinkId for this Gateway
and is indexed by mediaGatewayId.

Indexes

cmedGatewayId

Column	Syntax	OID
cmedNextLinkId The Next Value for a cmedGatewayLinkId. Assists the manager in selecting a value for cmedGatewayLinkId. Using the TestAndIncr syntax, A Manager will 'lock' this variable, ensuring single access.	SNMPv2-TCTestAndIncrr/w Type Constraints: range: 0..2147483647 Description: Represents integer-valued information used for atomic operations. When the management protocol is used to specify that an object instance having this syntax is to be modified, the new value supplied via the management …	.1.3.6.1.4.1.9.10.99999.1.1.1.1.1

A list of cmedGatewayConfigEntry objects.

cmedGatewayConfigEntry row .1.3.6.1.4.1.9.10.99999.1.1.2.1

Entry holding configuration information about a
group of Media Gateway Controllers sharing the same
signaling link.

Indexes

cmedGatewayId cmedGatewayLinkId

Column	Syntax	OID
cmedGatewayId The unique Media Gateway Id which identifies this media gateway	CMediaGatewayId Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.9.10.99999.1.1.2.1.1
cmedGatewayLinkId The unique link id which identifies the signaling link that this gateway uses to communicate with the Gateway Controllers to form an H.248 association.	CMediaGatewayLinkId Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.9.10.99999.1.1.2.1.2
cmedGatewayLinkName A descriptive name of this signaling link / media gateway combination	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.9.10.99999.1.1.2.1.3
cmedGatewayIPAddress The IP address that the Media Gateway Controller will use to communicate with the Media Gateway. This object reflects the IP address over control PVC that user configures in cMediaGwIpConfigTable. The v…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.9.10.99999.1.1.2.1.4
cmedGatewayPort TCP/UDP port number that the Media Gateway Controller will use to communicate with the Media Gateway. The value 0 is returned if the entry is invalid.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.9.10.99999.1.1.2.1.5
cmedGatewayEncodingScheme The encoding scheme that would be used to encode the H.248 messages that are sent/received to/from the gateway controller	Enumerationr/w Enumerated Values: 1 text 2 binary	.1.3.6.1.4.1.9.10.99999.1.1.2.1.6
cmedGatewayProtocol Type of the control protocol in use notApplicable (1) - other (2) - Other (none from the list below) dss1-ip (3) - Q931+ ipdc (4) - IPDC megacov1 (5) - MEGACO/H.248 Version 1 megacov2 …	Enumerationr/w Enumerated Values: 1 notApplicable 2 other 3 dss1Ip 4 ipdc 5 megacov1 6 megacov2 7 mgcp	.1.3.6.1.4.1.9.10.99999.1.1.2.1.7
cmedGatewaySigTptProtocol Type of the transport protocol that is being used to transport the H.248 signaling traffic	Enumerationr/w Enumerated Values: 1 tcp 2 udp 3 sctp 4 other	.1.3.6.1.4.1.9.10.99999.1.1.2.1.8
cmedGatewayAdminStatus The desired state of the gateway. The testing(3) state indicates that no signaling packets can be passed. When a managed system initializes, all gateways start with cmedGatewayAdminStatus in the down(2) state. A…	Enumerationr/w Enumerated Values: 1 up 2 down 3 testing	.1.3.6.1.4.1.9.10.99999.1.1.2.1.9
cmedGatewayOperStatus The current operational state of the gateway. up (1) - ready to communicate with MGC down (2) testing(3) - in some test mode unknown(4) - status can not be determined for some reason. The testi…	Enumeration Enumerated Values: 1 up 2 down 3 testing 4 unknown	.1.3.6.1.4.1.9.10.99999.1.1.2.1.10
cmedGatewayLastStatusChange The value of sysUpTime at the time the associated link entered its current operational status. If the current status was entered prior to the last re-initialization of the local network management subsystem, then th…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.10.99999.1.1.2.1.11
cmedGatewayResetStatistics This object can be used to reset all statistics collected for this media gateway link so far. Statistics will be reset when the object is SET to 'reset'. Upon reset, the agent changes the value of this object to 'notAp…	Enumerationr/w Enumerated Values: 1 notApplicable 2 other 3 reset	.1.3.6.1.4.1.9.10.99999.1.1.2.1.12
cmedGatewayRowStatus This is used to create new rows, modify existing rows and to delete existing rows.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.99999.1.1.2.1.13

List of the Media Gateway Controllers that are managed 
in the network

cmedGwyControllerEntry row .1.3.6.1.4.1.9.10.99999.1.1.3.1

Entry holding information about an individual
Media Gateway Controller.

Indexes

cmedGatewayId cmedGatewayLinkId cmedGwyControllerId

Column	Syntax	OID
cmedGwyControllerId An unique identification number that is assigned to the gateway controller by the manager	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.10.99999.1.1.3.1.1
cmedGwyControllerIPAddress The IP address of the Media Gateway Controller. The value 0.0.0.0 is returned if the entry is invalid.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.9.10.99999.1.1.3.1.2
cmedGwyControllerPort TCP port of the Media Gateway Controller. The value 0 is returned if the entry is invalid.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.9.10.99999.1.1.3.1.3
cmedGwyControllerAdminStatus The desired state of the gateway. The testing(3) state indicates that no signaling packets can be passed. When a managed system initializes, all gateways start with cmedGwyControllerAdminStatus in the down(2) stat…	Enumerationr/w Enumerated Values: 1 up 2 down 3 testing	.1.3.6.1.4.1.9.10.99999.1.1.3.1.4
cmedGwyControllerOperStatus The current operational state of the gateway controller. The standby(3) state indicates that it is in the standby mode and no signaling packets can be passed. If cmedGwyControllerAdminStatus is down(2) then cmed…	Enumeration Enumerated Values: 1 up 2 down 3 standby	.1.3.6.1.4.1.9.10.99999.1.1.3.1.5

A list of mediaGatewayTableEntry objects.

cmedGatewayStatsEntry row .1.3.6.1.4.1.9.10.99999.1.2.1.1

Entry holding statistics about a group of
media Gateway/signaling link pair

Indexes

cmedGatewayId cmedGatewayLinkId

Column	Syntax	OID
cmedNumInMessages Total number of messages received on the link.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.99999.1.2.1.1.1
cmedNumInOctets Total number of octets received on the link.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.99999.1.2.1.1.2
cmedNumOutMessages Total number of messages sent on the link.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.99999.1.2.1.1.3
cmedNumOutOctets Total number of octets sent on the link.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.99999.1.2.1.1.4
cmedNumErrors Total number of signaling-level errors encountered. Includes, but is not limited to, number of bad messages received, number of failures to sent a message and number of other errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.99999.1.2.1.1.5
cmedNumTimerRecovery Total Number of timer recovery events since the statistics was last reset. This reflects all protocol timers that are supported (For H.248, T - start timer, S - short timer, L - long timer, and Z - long duration t…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.99999.1.2.1.1.6
cmedTransportNumLosses Number of times a transport link was lost (excluding switch-over cases). A link loss is defined as loss of communication with the entity (MGC) due to hardware/transient problems in the interface or other related har…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.99999.1.2.1.1.7
cmedTransportNumSwitchover Number of times when the signaling was switched over to an alternative link. This includes switchover due to the Handoffs initiated by the gateway controllers	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.99999.1.2.1.1.8
cmedTransportTotalNumAlarms Total number of all alarms issued for the transport layer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.99999.1.2.1.1.9
cmedTransportLastEvent Last event reported by the transport layer. notApplicable (1) - Invalid/unknown. other (2) - None from the list below. linkUp (3) - Transport link is up. linkLoss (4) - Transport link los…	Enumeration Enumerated Values: 1 notApplicable 2 other 3 linkUp 4 linkLoss 5 persistentError 6 linkShutdown 7 switchOver	.1.3.6.1.4.1.9.10.99999.1.2.1.1.10
cmedTransportLastEventTime The value of sysUpTime at the time when the event specified by cmedTransportLastEvent occurred. If the last event occurred prior to the last re-initialization of the local network management subsystem, then this obj…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.10.99999.1.2.1.1.11
cmedLastStatisticsReset The value of sysUpTime at the time when the statistics were reset. If the reset occurred prior to the last re-initialization of the local network management subsystem, this object contains a zero value.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.10.99999.1.2.1.1.12

This table contains a nextTerminationId for each 
Gateway. It provides the manager with the 
nextTerminationId for use in creating a new 
TerminationsTable Entry.

cmedTermIdEntry row .1.3.6.1.4.1.9.10.99999.1.3.1.1

This table contains a nextTerminationId for each
Gateway, and is indexed by mediaGatewayId.

Indexes

cmedGatewayId

Column	Syntax	OID
cmedNextTerminationId The Next Value for a MediaGateway TerminationId. Assists the manager in selecting a value for cmedTermId. Using the TestAndIncr syntax, A Manager will 'lock' this variable, ensuring single access.	SNMPv2-TCTestAndIncrr/w Type Constraints: range: 0..2147483647 Description: Represents integer-valued information used for atomic operations. When the management protocol is used to specify that an object instance having this syntax is to be modified, the new value supplied via the management …	.1.3.6.1.4.1.9.10.99999.1.3.1.1.1

This table contains information about terminations 
in a media gateway. It is a list of terminations. 
The number of entries equals to the total number of 
terminations for all contexts in a gateway.

cmedTerminationsEntry row .1.3.6.1.4.1.9.10.99999.1.3.2.1

It contains objects that describe a termination.

Indexes

cmedGatewayId cmedTermId

Column	Syntax	OID
cmedTermId An unique identification number that is assigned to the termination by a media gateway. This is the TerminationId that would be used in the protocol messages that are sent from the gateway	CMediaGatewayTermId Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.9.10.99999.1.3.2.1.1
cmedTermName A descriptive name that would describe this termination and its use. For example, 'emergency-ds0-1' indicating that this termination is reserved as an emergency DS0 channel	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.9.10.99999.1.3.2.1.2
cmedTermAdminStatus The desired state of the termination. The testing(3) state indicates that no connections can be created for this termination. When a managed system initializes, all terminations start with cmedTermAdminStatus in th…	Enumerationr/w Enumerated Values: 1 inService 2 outOfService 3 testing	.1.3.6.1.4.1.9.10.99999.1.3.2.1.3
cmedTermOperStatus The current operational state of the termination. The testing(3) state indicates that it is in the testing mode and no connections can be created on it. If cmedTermAdminStatus is outOfService(2) then cmedTermOperSta…	Enumeration Enumerated Values: 1 up 2 down 3 testing	.1.3.6.1.4.1.9.10.99999.1.3.2.1.4
cmedTermInterfaceIdentifier A number that uniquely identifies the interface in the physical gateway. This is the ifIndex in the ifTable, that this termination would be using to communicate to other gateways	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.9.10.99999.1.3.2.1.5
cmedTermPropertyProfileId This determines the profile of the termination which determines what kind of capabilities this termination has. This is an index into the cmedPropertyProfileTable which identifies all the profile that are available	Unsigned32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.10.99999.1.3.2.1.6
cmedTermRowStatus This is used to create new rows in this table, Modify existing rows, and to delete existing rows.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.99999.1.3.2.1.7

This table contains a list of the properties 
supported in a Profile.  A Manager builds a Profile 
of properties, then ties each termination to a 
defined profile

cmedPropertyProfileEntry row .1.3.6.1.4.1.9.10.99999.1.3.3.1

Each row represents a default property of the
Property Profile N-entries per
mediaGatewayId/PropertyId, one entry per property.

Indexes

cmedGatewayId cmedPropertyProfileId cmedPropertyProfileIndex

Column	Syntax	OID
cmedPropertyProfileId This PropertyProfile Identifier uniquely identifies this set of properties. This is the value each termination would refer, when they would like to support all the properties in this profile	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.10.99999.1.3.3.1.1
cmedPropertyProfileIndex This is the index to the PropertyProfile This is just a 'counter' through the cmedPropertyProfile Table. ie, property=1 property=2 etc.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.10.99999.1.3.3.1.2
cmedPropertyProfileProperty The Property supported by this Profile. This is an Object ID (OID) defined in a package MIB to identify a Particular property (such as AnalogLines, Tones etc).	SNMPv2-TCAutonomousTyper/w Description: Represents an independently extensible type identification value. It may, for example, indicate a particular sub-tree with further MIB definitions, or define a particular type of protocol or hardware.	.1.3.6.1.4.1.9.10.99999.1.3.3.1.3
cmedPropertyProfileRowStatus It is used to create new rows in this table, modify existing rows, and to delete existing rows.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.99999.1.3.3.1.4