CISCO-IETF-MEGACO-MIB

        This MIB module is based on the Internet Draft 
draft-ietf-megaco-mib-05.txt. 
        
It defines the attributes of Megaco protocol. 
Reference: ITU H.248 (Rev. COM16-107).
    
Source file
CISCO-IETF-MEGACO-MIB
Last revised
Identity
ciscoIetfMegacoMIB
Base OID
1.3.6.1.4.1.9.10.99999
Imported Objects
CISCO-SMI ciscoExperiment
IF-MIB InterfaceIndex
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Integer32 IpAddress MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC AutonomousType RowStatus TestAndIncr TEXTUAL-CONVENTION (no object page) TimeStamp
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-IETF-MEGACO-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-IETF-MEGACO-MIB::ciscoIetfMegacoMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IETF-MEGACO-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IETF-MEGACO-MIB::ciscoIetfMegacoMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (67)
.1.3.6.1.4.1.9.10.99999
.1.3.6.1.4.1.9.10.99999.0
.1.3.6.1.4.1.9.10.99999.1
.1.3.6.1.4.1.9.10.99999.1.1
.1.3.6.1.4.1.9.10.99999.1.1.1
.1.3.6.1.4.1.9.10.99999.1.1.1.1
.1.3.6.1.4.1.9.10.99999.1.1.1.1.1
.1.3.6.1.4.1.9.10.99999.1.1.2
.1.3.6.1.4.1.9.10.99999.1.1.2.1
.1.3.6.1.4.1.9.10.99999.1.1.2.1.1
Enumeration
.1.3.6.1.4.1.9.10.99999.1.1.2.1.10
.1.3.6.1.4.1.9.10.99999.1.1.2.1.11
Enumeration
.1.3.6.1.4.1.9.10.99999.1.1.2.1.12
.1.3.6.1.4.1.9.10.99999.1.1.2.1.13
.1.3.6.1.4.1.9.10.99999.1.1.2.1.2
OctetString
.1.3.6.1.4.1.9.10.99999.1.1.2.1.3
.1.3.6.1.4.1.9.10.99999.1.1.2.1.4
Integer32
.1.3.6.1.4.1.9.10.99999.1.1.2.1.5
Enumeration
.1.3.6.1.4.1.9.10.99999.1.1.2.1.6
Enumeration
.1.3.6.1.4.1.9.10.99999.1.1.2.1.7
Enumeration
.1.3.6.1.4.1.9.10.99999.1.1.2.1.8
Enumeration
.1.3.6.1.4.1.9.10.99999.1.1.2.1.9
.1.3.6.1.4.1.9.10.99999.1.1.3
.1.3.6.1.4.1.9.10.99999.1.1.3.1
Unsigned32
.1.3.6.1.4.1.9.10.99999.1.1.3.1.1
.1.3.6.1.4.1.9.10.99999.1.1.3.1.2
Integer32
.1.3.6.1.4.1.9.10.99999.1.1.3.1.3
Enumeration
.1.3.6.1.4.1.9.10.99999.1.1.3.1.4
Enumeration
.1.3.6.1.4.1.9.10.99999.1.1.3.1.5
.1.3.6.1.4.1.9.10.99999.1.2
.1.3.6.1.4.1.9.10.99999.1.2.1
.1.3.6.1.4.1.9.10.99999.1.2.1.1
.1.3.6.1.4.1.9.10.99999.1.2.1.1.1
Enumeration
.1.3.6.1.4.1.9.10.99999.1.2.1.1.10
.1.3.6.1.4.1.9.10.99999.1.2.1.1.11
.1.3.6.1.4.1.9.10.99999.1.2.1.1.12
.1.3.6.1.4.1.9.10.99999.1.2.1.1.2
.1.3.6.1.4.1.9.10.99999.1.2.1.1.3
.1.3.6.1.4.1.9.10.99999.1.2.1.1.4
.1.3.6.1.4.1.9.10.99999.1.2.1.1.5
.1.3.6.1.4.1.9.10.99999.1.2.1.1.6
.1.3.6.1.4.1.9.10.99999.1.2.1.1.7
.1.3.6.1.4.1.9.10.99999.1.2.1.1.8
.1.3.6.1.4.1.9.10.99999.1.2.1.1.9
.1.3.6.1.4.1.9.10.99999.1.3
.1.3.6.1.4.1.9.10.99999.1.3.1
.1.3.6.1.4.1.9.10.99999.1.3.1.1
.1.3.6.1.4.1.9.10.99999.1.3.1.1.1
.1.3.6.1.4.1.9.10.99999.1.3.2
.1.3.6.1.4.1.9.10.99999.1.3.2.1
.1.3.6.1.4.1.9.10.99999.1.3.2.1.1
OctetString
.1.3.6.1.4.1.9.10.99999.1.3.2.1.2
Enumeration
.1.3.6.1.4.1.9.10.99999.1.3.2.1.3
Enumeration
.1.3.6.1.4.1.9.10.99999.1.3.2.1.4
.1.3.6.1.4.1.9.10.99999.1.3.2.1.5
Unsigned32
.1.3.6.1.4.1.9.10.99999.1.3.2.1.6
.1.3.6.1.4.1.9.10.99999.1.3.2.1.7
.1.3.6.1.4.1.9.10.99999.1.3.3
.1.3.6.1.4.1.9.10.99999.1.3.3.1
Unsigned32
.1.3.6.1.4.1.9.10.99999.1.3.3.1.1
Unsigned32
.1.3.6.1.4.1.9.10.99999.1.3.3.1.2
.1.3.6.1.4.1.9.10.99999.1.3.3.1.3
.1.3.6.1.4.1.9.10.99999.1.3.3.1.4
.1.3.6.1.4.1.9.10.99999.1.4
.1.3.6.1.4.1.9.10.99999.3
.1.3.6.1.4.1.9.10.99999.3.1
.1.3.6.1.4.1.9.10.99999.3.2
Dependencies (8) 6 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCO-SMIcisco
  3. SNMPv2-TCrfc
  4. IANAifType-MIBrfc
  5. SNMPv2-CONFrfc
  6. SNMPv2-MIBrfc
  7. IF-MIBrfc
  8. SNMP-FRAMEWORK-MIBrfc
  9. CISCO-IETF-MEGACO-MIBciscoselected
Type Definitions (3)
Integer32 range: 1..2147483647
Unsigned32 range: 1..2147483647
Unsigned32 range: 1..2147483647
Conformance Groups (5)
This group contains of all the configuration Information
for a Media Gateway. This group is mandatory for any
implementation managing a media gateway or a group of
media gateways
.1.3.6.1.4.1.9.10.99999.3.2.1
This group contains of all the statistics Information
for a Media Gateway. This group is mandatory for any
implementation managing a media gateway or a group of
media gateways
.1.3.6.1.4.1.9.10.99999.3.2.2
This group contains of all the configuration Information
for a Media Gateway Controller. This group is mandatory
for any implementation managing a media gateway
controller or a group of media gateway controllers.
It is also mandatory for implementations managing
media gateway(s)
.1.3.6.1.4.1.9.10.99999.3.2.3
Agent provides NextId's to the Manager to assist in
selecting and creating new table entries.
This group is optional for all the implementations.
But when it is not implemented, it is the manager's
responsibility to uniquely determine these ids
.1.3.6.1.4.1.9.10.99999.3.2.4
This group contains of all the configuration Information
for a termination. This group is mandatory
for any implementation managing termination.
.1.3.6.1.4.1.9.10.99999.3.2.5
Compliance Statements (1)

OID .1.3.6.1.4.1.9.10.99999.3.1.1
Compliance statement for entities which implement
the CISCO-IETF-MEGACO-MIB.
Required groups
mandatory cmedConfig
mandatory cmedStatsGroup
optional cmedGwyControllerGroup This group is mandatory for all Systems that are gateway
controllers and are being managed over a distributed
environment
optional cmedNextIdGroup This group is not mandatory for all the agent
implementations. But if this group is not implemented,
then the manager is responsible for uniquely determining
the nextId to be used in various listed objects.
optional cmedTermGroup This group is mandatory for the system that manages
terminations.