CISCO-IEEE8021-CFM-EXT-MIB Table View

This table contains a list of Maintenance Association.

ciceCfmMaNetEntry row .1.3.6.1.4.1.9.9.679.1.3.1.1

An entry containing Continuity Check configuration for
a particular MA.

Indexes

IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex

Column	Syntax	OID
ciceCfmMaNetCciEnable This object specifies whether Continuity Check Initiator is enabled. A value of 'true' indicates that the Continuity Check Initiator state machine will start and all MEPs in this MA will generate Continui…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.679.1.3.1.1.1
ciceCfmMaNetCciDirection This object specifies the direction in which the Maintenance association faces on the bridge port.	IEEE8021-CFM-MIBDot1agCfmMpDirectionr/w Type Values: 1 down 2 up	.1.3.6.1.4.1.9.9.679.1.3.1.1.2
ciceCfmMaNetLossThreshold This object specifies the number of CCMs that is allowed to be lost before cleaning up the corresponding entry in CC database.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.679.1.3.1.1.3

This table contains a list of CFM capable ports.

ciceCfmInterfaceEntry row .1.3.6.1.4.1.9.9.679.1.4.1.1

An entry containing information about the CFM state
on a particular CFM capable port.

Indexes

ciceCfmIfIndex

Column	Syntax	OID
ciceCfmIfIndex The port number associated with this CFM port. This is a unique index for an entry in the ciceCfmInterfaceTable. A non-zero index for an entry indicates the ifIndex for the corresponding CFM capable inter…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.9.9.679.1.4.1.1.1
ciceCfmIfState The administrative CFM state of the port. enable - enables CFM on the port. disable - disables CFM on the port. transparent - forward CFM frames like regular …	Enumerationr/w Enumerated Values: 1 enable 2 disable 3 transparent	.1.3.6.1.4.1.9.9.679.1.4.1.1.2

This table contains a list of Maintenance domain
Intermediate Points.
          
This table manages MIPs which are created by rules
specified on the Maintenance Association (MA) and
Maintenance Domain (MD) on the local device. MIPs can
also be created by rules specified on Default MD Level,
which is covered by dot1agCfmDefaultMdTable in
IEEE8021-CFM-MIB.

ciceCfmMipEntry row .1.3.6.1.4.1.9.9.679.1.4.2.1

An entry containing configuration of a particular MIP.

Each row in the table represents a different MIP.
In order to facilitate the diagnosis of connectivity
failures, an administrator can make a DoSAP visi…

Indexes

ciceCfmIfIndex ciceCfmMipVlanIndex

Column	Syntax	OID
ciceCfmMipVlanIndex The VLAN-ID with which the MIP is associated on the interface.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.9.9.679.1.4.2.1.1
ciceCfmMipMdLevel The MD level of the MIP.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.679.1.4.2.1.2
ciceCfmMipStorageType The storage type for this conceptual row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.679.1.4.2.1.3
ciceCfmMipRowStatus The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.679.1.4.2.1.4

This table contains a list of VLANs on CFM interfaces.
          
Each row in the table represents a MAC enable
configuration on an interface associated with
a VLAN. Creating one row installs a system CAM
entry. Linktrace replies and Loopback messages
and replies could be seen from the interface for
which the Mac address was learnt via the system CAM
table for Down MEPs.

ciceCfmMacEnableIfEntry row .1.3.6.1.4.1.9.9.679.1.4.3.1

An entry containing MAC enable configuration
of a particular VLAN on an interface.

Indexes

ciceCfmIfIndex ciceCfmMacEnableVlanIndex

Column	Syntax	OID
ciceCfmMacEnableVlanIndex The VLAN-ID with which the MAC enable attribute is associated on the interface.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.9.9.679.1.4.3.1.1
ciceCfmMacEnableStorageType The storage type for this conceptual row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.679.1.4.3.1.2
ciceCfmMacEnableRowStatus The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.679.1.4.3.1.3