CISCO-HSRP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
18

cHsrpGrpTable

table
.1.3.6.1.4.1.9.9.106.1.2.1 · 1 row entry · 18 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cHsrpGrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-HSRP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-HSRP-MIB::cHsrpGrpTable' 
A table containing information on each HSRP group
for each interface.
cHsrpGrpEntry row .1.3.6.1.4.1.9.9.106.1.2.1.1
Information about an HSRP group. Management applications
use cHsrpGrpRowStatus to control entry modification,
creation and deletion.

Setting cHsrpGrpRowStatus to 'active' causes the router to
communicate us…
Indexes
Column Syntax OID
cHsrpGrpNumber
This object along with the ifIndex of a particular interface
uniquely identifies an HSRP group.

Group numbers 0,1 and 2 are the only valid group numbers
for TokenRing interfaces. For other media types, nu…
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.106.1.2.1.1.1
cHsrpGrpAuth
This is an unencrypted authentication string which is
carried in all HSRP messages. An authentication string
mismatch prevents a router interface from learning the
designated IP address or HSRP timer values from
other H…
OctetStringr/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.9.9.106.1.2.1.1.2
cHsrpGrpPriority
The cHsrpGrpPriority helps to select the active and the
standby routers. The router with the highest priority is
selected as the active router. In the priority range of 0
to 255, 0 is the lowest priority and 255 is the …
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.106.1.2.1.1.3
cHsrpGrpPreempt
This object, if TRUE, indicates that the current router
should attempt to overthrow a lower priority active router
and attempt to become the active router. If this object is
FALSE, the router will become the active rout…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.106.1.2.1.1.4
cHsrpGrpPreemptDelay
This delay is the time difference between a router power
up and the time it can actually start preempting the
currently active router.

When a router first comes up, it doesn't have a complete
routing tabl…
secondsUnsigned32r/w
Constraints:
range: 0-3600
 .1.3.6.1.4.1.9.9.106.1.2.1.1.5
cHsrpGrpUseConfiguredTimers
HSRP routers learn a group's Hellotime or Holdtime from
hello messages.

The Hellotime is used to determine the frequency of
generating hello messages when this router becomes the
active or standby router.…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.106.1.2.1.1.6
cHsrpGrpConfiguredHelloTime
If cHsrpGrpUseConfiguredTimers is true,
cHsrpGrpConfiguredHelloTime is used when this router is an
active router. Otherwise, the Hellotime learned from the
current active router is used. All routers on a particular
LAN …
millisecondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.106.1.2.1.1.7
cHsrpGrpConfiguredHoldTime
If cHsrpGrpUseConfiguredTimers is true,
cHsrpGrpConfiguredHoldTime is used when this router is an
active router. Otherwise, the Holdtime learned from the
current active router is used. All routers on a particular
LAN se…
millisecondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.106.1.2.1.1.8
cHsrpGrpLearnedHelloTime
If the Hellotime is not configured on a router, it can be
learned from the Hello messages from active router,
provided the Hello message is authenticated. If the
Hellotime is not learned from a Hello message from the
ac…
millisecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.106.1.2.1.1.9
cHsrpGrpLearnedHoldTime
If the Holdtime is not configured on a router, it can be
learned from the Hello message from the active router.
Holdtime should be learned only if the Hello message is
authenticated. If the Holdtime is not learned and i…
millisecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.106.1.2.1.1.10
cHsrpGrpVirtualIpAddr
This is the primary virtual IP address used by this
group. If this address is configured (i.e a non zero ip
address), this value is used. Otherwise, the agent will
attempt to discover the virtual address through a disc…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.9.106.1.2.1.1.11
cHsrpGrpUseConfigVirtualIpAddr
If this object is TRUE, cHsrpGrpVirtualIpAddr was a
configured one. Otherwise, it indicates that
cHsrpGrpVirtualIpAddr was a learned one.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.106.1.2.1.1.12
cHsrpGrpActiveRouter
Ip Address of the currently active router for this group.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.9.106.1.2.1.1.13
cHsrpGrpStandbyRouter
Ip Address of the currently standby router for this
group.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.9.106.1.2.1.1.14
cHsrpGrpStandbyState
The current HSRP state of this group on this interface.
HsrpState
Type Values:
1initial
2learn
3listen
4speak
5standby
6active
 .1.3.6.1.4.1.9.9.106.1.2.1.1.15
cHsrpGrpVirtualMacAddr
Mac Addresses used are as specified in RFC 2281. For
ethernet and fddi interfaces, a MAC address will be in the
range 00:00:0c:07:ac:00 through 00:00:0c:07:ac:ff. The last
octet is the hexadecimal equivalent of cHsrpGrp…
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.9.9.106.1.2.1.1.16
cHsrpGrpEntryRowStatus
The control that allows modification, creation, and
deletion of entries. For detailed rules see the
DESCRIPTION for cHsrpGrpEntry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.106.1.2.1.1.17
cHsrpGrpIpNone
This object specifies the disable HSRP IPv4 virtual
IP address.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.106.1.2.1.1.18