CISCO-HC-ALARM-MIB

        This module defines Remote Monitoring MIB extensions for
High Capacity Alarms.
    
Source file
CISCO-HC-ALARM-MIB
Last revised
Identity
ciscoHcAlarmMIB
Base OID
1.3.6.1.4.1.9.10.93
Imported Objects
CISCO-SMI ciscoExperiment
HCNUM-TC CounterBasedGauge64
RMON-MIB OwnerString rmonEventGroup (no object page)
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC RowStatus StorageType TEXTUAL-CONVENTION (no object page) VariablePointer
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-HC-ALARM-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-HC-ALARM-MIB::ciscoHcAlarmMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-HC-ALARM-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-HC-ALARM-MIB::ciscoHcAlarmMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (31)
.1.3.6.1.4.1.9.10.93
.1.3.6.1.4.1.9.10.93.1
.1.3.6.1.4.1.9.10.93.1.1
.1.3.6.1.4.1.9.10.93.1.1.1
.1.3.6.1.4.1.9.10.93.1.1.1.1
Integer32
.1.3.6.1.4.1.9.10.93.1.1.1.1.1
.1.3.6.1.4.1.9.10.93.1.1.1.1.10
.1.3.6.1.4.1.9.10.93.1.1.1.1.11
.1.3.6.1.4.1.9.10.93.1.1.1.1.12
.1.3.6.1.4.1.9.10.93.1.1.1.1.13
Integer32
.1.3.6.1.4.1.9.10.93.1.1.1.1.14
Integer32
.1.3.6.1.4.1.9.10.93.1.1.1.1.15
.1.3.6.1.4.1.9.10.93.1.1.1.1.16
.1.3.6.1.4.1.9.10.93.1.1.1.1.17
.1.3.6.1.4.1.9.10.93.1.1.1.1.18
.1.3.6.1.4.1.9.10.93.1.1.1.1.19
secondsInteger32
.1.3.6.1.4.1.9.10.93.1.1.1.1.2
.1.3.6.1.4.1.9.10.93.1.1.1.1.3
Enumeration
.1.3.6.1.4.1.9.10.93.1.1.1.1.4
.1.3.6.1.4.1.9.10.93.1.1.1.1.5
.1.3.6.1.4.1.9.10.93.1.1.1.1.6
Enumeration
.1.3.6.1.4.1.9.10.93.1.1.1.1.7
.1.3.6.1.4.1.9.10.93.1.1.1.1.8
.1.3.6.1.4.1.9.10.93.1.1.1.1.9
.1.3.6.1.4.1.9.10.93.1.2
Bits
.1.3.6.1.4.1.9.10.93.1.2.1
.1.3.6.1.4.1.9.10.93.2
.1.3.6.1.4.1.9.10.93.2.0
.1.3.6.1.4.1.9.10.93.3
.1.3.6.1.4.1.9.10.93.3.1
.1.3.6.1.4.1.9.10.93.3.2
Dependencies (6) 6 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCO-SMIcisco
  3. SNMPv2-TCrfc
  4. HCNUM-TCrfc
  5. SNMPv2-CONFrfc
  6. RMON-MIBrfc
  7. CISCO-HC-ALARM-MIBciscoselected
Type Definitions (1)
Enumeration
valueNotAvailable(1)
valuePositive(2)
valueNegative(3)
Conformance Groups (3)
A collection of objects used to configure entries for high
capacity alarm threshold monitoring purposes.
.1.3.6.1.4.1.9.10.93.3.2.1
A collection of objects used to indicate an agent's high
capacity alarm threshold monitoring capabilities.
.1.3.6.1.4.1.9.10.93.3.2.2
A collection of notifications to deliver information
related to a high capacity rising or falling threshold event
to a management application.
.1.3.6.1.4.1.9.10.93.3.2.3
Compliance Statements (1)

OID .1.3.6.1.4.1.9.10.93.3.1.1
Describes the requirements for conformance to the High
Capacity Alarm MIB.
Required groups
Notifications / Traps (2)
NameOIDDescription
.1.3.6.1.4.1.9.10.93.2.0.1
The SNMP notification that is generated when a high
capacity alarm entry crosses its rising threshold and
generates an event that is configured for sending SNMP
traps.

The cHcAlarmEntry object instances identified in the OBJECTS
clause are from the entry that causes this notification to
be generated.
.1.3.6.1.4.1.9.10.93.2.0.2
The SNMP notification that is generated when a high
capacity alarm entry crosses its falling threshold and
generates an event that is configured for sending SNMP
traps.

The cHcAlarmEntry object instances identified in the OBJECTS
clause are from the entry that causes this notification to
be generated.