CISCO-HARDWARE-IP-VERIFY-MIB

This MIB module defines management objects for
        configuration and monitoring of the Intrusion 
        Detection System (IDS) that checks for IP packet
        verification. 
        
        The following terms are used throughout the MIB:
            IDS:  Intrusion Detection System
            CRC:  Cyclic Redundancy Check
             DF:  Don't Fragment

Imported Objects

ciscoMgmtCISCO-SMI
MODULE-COMPLIANCE, OBJECT-GROUPSNMPv2-CONF
MODULE-IDENTITY, OBJECT-TYPE, Counter64SNMPv2-SMI
ciscoHardwareIpVerifyMIB .1.3.6.1.4.1.9.9.804
ciscoHardwareIpVerifyMIBNotifs .1.3.6.1.4.1.9.9.804.0
ciscoHardwareIpVerifyMIBObjects .1.3.6.1.4.1.9.9.804.1
chivIpVerifyTable .1.3.6.1.4.1.9.9.804.1.1
chivIpVerifyEntry .1.3.6.1.4.1.9.9.804.1.1.1
chivIpVerifyCheckIpType .1.3.6.1.4.1.9.9.804.1.1.1.1
chivIpVerifyCheckTypeName .1.3.6.1.4.1.9.9.804.1.1.1.2
chivIpVerifyCheckStatus .1.3.6.1.4.1.9.9.804.1.1.1.3
chivIpVerifyPacketsDropped .1.3.6.1.4.1.9.9.804.1.1.1.4
ciscoHardwareIpVerifyMIBConform .1.3.6.1.4.1.9.9.804.2
ciscoHardwareIpVerifyMIBCompliances .1.3.6.1.4.1.9.9.804.2.1
ciscoHardwareIpVerifyMIBGroups .1.3.6.1.4.1.9.9.804.2.2